Esempio n. 1
0
  /**
   * Sets the output text.
   *
   * @param t output text
   * @param s text size
   */
  public final void setText(final byte[] t, final int s) {
    // remove invalid characters and compare old with new string
    int ns = 0;
    final int ts = text.size();
    final byte[] tt = text.text();
    boolean eq = true;
    for (int r = 0; r < s; ++r) {
      final byte b = t[r];
      // support characters, highlighting codes, tabs and newlines
      if (b >= ' ' || b <= TokenBuilder.MARK || b == 0x09 || b == 0x0A) {
        t[ns++] = t[r];
      }
      eq &= ns < ts && ns < s && t[ns] == tt[ns];
    }
    eq &= ns == ts;

    // new text is different...
    if (!eq) {
      text = new BaseXTextTokens(Arrays.copyOf(t, ns));
      rend.setText(text);
      scroll.pos(0);
    }
    if (undo != null) undo.store(t.length != ns ? Arrays.copyOf(t, ns) : t, 0);
    SwingUtilities.invokeLater(calc);
  }
  public final int readCharacter(final char[] allowed) throws IOException {
    // if we restrict to a limited set and the current character
    // is not in the set, then try again.
    char c;

    Arrays.sort(allowed); // always need to sort before binarySearch

    while (Arrays.binarySearch(allowed, c = (char) readVirtualKey()) < 0) ;

    return c;
  }
  /**
   * Move the cursor <i>where</i> characters, withough checking the current buffer.
   *
   * @see #where
   * @param where the number of characters to move to the right or left.
   */
  private final void moveInternal(final int where) throws IOException {
    // debug ("move cursor " + where + " ("
    // + buf.cursor + " => " + (buf.cursor + where) + ")");
    buf.cursor += where;

    char c;

    if (where < 0) {
      int len = 0;
      for (int i = buf.cursor; i < buf.cursor - where; i++) {
        if (buf.getBuffer().charAt(i) == '\t') len += TAB_WIDTH;
        else len++;
      }

      char cbuf[] = new char[len];
      Arrays.fill(cbuf, BACKSPACE);
      out.write(cbuf);

      return;
    } else if (buf.cursor == 0) {
      return;
    } else if (mask != null) {
      c = mask.charValue();
    } else {
      printCharacters(buf.buffer.substring(buf.cursor - where, buf.cursor).toCharArray());
      return;
    }

    // null character mask: don't output anything
    if (NULL_MASK.equals(mask)) {
      return;
    }

    printCharacters(c, Math.abs(where));
  }
 private final void printCharacters(final char c, final int num) throws IOException {
   if (num == 1) {
     printCharacter(c);
   } else {
     char[] chars = new char[num];
     Arrays.fill(chars, c);
     printCharacters(chars);
   }
 }
  /**
   * Output the specified character to the output stream without manipulating the current buffer.
   */
  private final void printCharacter(final int c) throws IOException {
    if (c == '\t') {
      char cbuf[] = new char[TAB_WIDTH];
      Arrays.fill(cbuf, ' ');
      out.write(cbuf);
      return;
    }

    out.write(c);
  }
Esempio n. 6
0
 /**
  * Sets the output text.
  *
  * @param text output text
  * @param size text size
  */
 public final void setText(final byte[] text, final int size) {
   byte[] txt = text;
   if (Token.contains(text, '\r')) {
     // remove carriage returns
     int ns = 0;
     for (int r = 0; r < size; ++r) {
       final byte b = text[r];
       if (b != '\r') text[ns++] = b;
     }
     // new text is different...
     txt = Arrays.copyOf(text, ns);
   } else if (text.length != size) {
     txt = Arrays.copyOf(text, size);
   }
   if (editor.text(txt)) {
     if (hist != null) hist.store(txt, editor.pos(), 0);
   }
   if (isShowing()) resizeCode.invokeLater();
 }
  /**
   * Redraw the rest of the buffer from the cursor onwards. This is necessary for inserting text
   * into the buffer.
   *
   * @param clear the number of characters to clear after the end of the buffer
   */
  private final void drawBuffer(final int clear) throws IOException {
    // debug ("drawBuffer: " + clear);
    char[] chars = buf.buffer.substring(buf.cursor).toCharArray();
    if (mask != null) Arrays.fill(chars, mask.charValue());

    printCharacters(chars);

    clearAhead(clear);
    back(chars.length);
    flushConsole();
  }
  /**
   * Output the specified characters to the output stream without manipulating the current buffer.
   */
  private final void printCharacters(final char[] c) throws IOException {
    int len = 0;
    for (int i = 0; i < c.length; i++)
      if (c[i] == '\t') len += TAB_WIDTH;
      else len++;

    char cbuf[];
    if (len == c.length) cbuf = c;
    else {
      cbuf = new char[len];
      int pos = 0;
      for (int i = 0; i < c.length; i++) {
        if (c[i] == '\t') {
          Arrays.fill(cbuf, pos, pos + TAB_WIDTH, ' ');
          pos += TAB_WIDTH;
        } else {
          cbuf[pos] = c[i];
          pos++;
        }
      }
    }

    out.write(cbuf);
  }
  /**
   * Create a new reader.
   *
   * @param in the input
   * @param out the output
   * @param bindings the key bindings to use
   * @param term the terminal to use
   */
  public ConsoleReader(InputStream in, Writer out, InputStream bindings, Terminal term)
      throws IOException {
    this.terminal = term;
    setInput(in);
    this.out = out;

    if (bindings == null) {
      try {
        String bindingFile =
            System.getProperty(
                "jline.keybindings",
                new File(System.getProperty("user.home", ".jlinebindings.properties"))
                    .getAbsolutePath());

        if (new File(bindingFile).isFile()) {
          bindings = new FileInputStream(new File(bindingFile));
        }
      } catch (Exception e) {
        // swallow exceptions with option debugging
        if (debugger != null) {
          e.printStackTrace(debugger);
        }
      }
    }

    if (bindings == null) {
      bindings = terminal.getDefaultBindings();
    }

    this.keybindings = new short[Character.MAX_VALUE * 2];

    Arrays.fill(this.keybindings, UNKNOWN);

    /**
     * Loads the key bindings. Bindings file is in the format:
     *
     * <p>keycode: operation name
     */
    if (bindings != null) {
      Properties p = new Properties();
      p.load(bindings);
      bindings.close();

      for (Iterator i = p.keySet().iterator(); i.hasNext(); ) {
        String val = (String) i.next();

        try {
          Short code = new Short(val);
          String op = (String) p.getProperty(val);

          Short opval = (Short) KEYMAP_NAMES.get(op);

          if (opval != null) {
            keybindings[code.shortValue()] = opval.shortValue();
          }
        } catch (NumberFormatException nfe) {
          consumeException(nfe);
        }
      }

      // hardwired arrow key bindings
      // keybindings[VK_UP] = PREV_HISTORY;
      // keybindings[VK_DOWN] = NEXT_HISTORY;
      // keybindings[VK_LEFT] = PREV_CHAR;
      // keybindings[VK_RIGHT] = NEXT_CHAR;
    }
  }
Esempio n. 10
0
    public void actionPerformed(ActionEvent e) {
      if (isDirectorySelected()) {
        File dir = getDirectory();
        if (dir != null) {
          try {
            // Strip trailing ".."
            dir = ShellFolder.getNormalizedFile(dir);
          } catch (IOException ex) {
            // Ok, use f as is
          }
          changeDirectory(dir);
          return;
        }
      }

      JFileChooser chooser = getFileChooser();

      String filename = getFileName();
      FileSystemView fs = chooser.getFileSystemView();
      File dir = chooser.getCurrentDirectory();

      if (filename != null) {
        // Remove whitespaces from end of filename
        int i = filename.length() - 1;

        while (i >= 0 && filename.charAt(i) <= ' ') {
          i--;
        }

        filename = filename.substring(0, i + 1);
      }

      if (filename == null || filename.length() == 0) {
        // no file selected, multiple selection off, therefore cancel the approve action
        resetGlobFilter();
        return;
      }

      File selectedFile = null;
      File[] selectedFiles = null;

      // Unix: Resolve '~' to user's home directory
      if (File.separatorChar == '/') {
        if (filename.startsWith("~/")) {
          filename = System.getProperty("user.home") + filename.substring(1);
        } else if (filename.equals("~")) {
          filename = System.getProperty("user.home");
        }
      }

      if (chooser.isMultiSelectionEnabled()
          && filename.length() > 1
          && filename.charAt(0) == '"'
          && filename.charAt(filename.length() - 1) == '"') {
        List<File> fList = new ArrayList<File>();

        String[] files = filename.substring(1, filename.length() - 1).split("\" \"");
        // Optimize searching files by names in "children" array
        Arrays.sort(files);

        File[] children = null;
        int childIndex = 0;

        for (String str : files) {
          File file = fs.createFileObject(str);
          if (!file.isAbsolute()) {
            if (children == null) {
              children = fs.getFiles(dir, false);
              Arrays.sort(children);
            }
            for (int k = 0; k < children.length; k++) {
              int l = (childIndex + k) % children.length;
              if (children[l].getName().equals(str)) {
                file = children[l];
                childIndex = l + 1;
                break;
              }
            }
          }
          fList.add(file);
        }

        if (!fList.isEmpty()) {
          selectedFiles = fList.toArray(new File[fList.size()]);
        }
        resetGlobFilter();
      } else {
        selectedFile = fs.createFileObject(filename);
        if (!selectedFile.isAbsolute()) {
          selectedFile = fs.getChild(dir, filename);
        }
        // check for wildcard pattern
        FileFilter currentFilter = chooser.getFileFilter();
        if (!selectedFile.exists() && isGlobPattern(filename)) {
          changeDirectory(selectedFile.getParentFile());
          if (globFilter == null) {
            globFilter = new GlobFilter();
          }
          try {
            globFilter.setPattern(selectedFile.getName());
            if (!(currentFilter instanceof GlobFilter)) {
              actualFileFilter = currentFilter;
            }
            chooser.setFileFilter(null);
            chooser.setFileFilter(globFilter);
            return;
          } catch (PatternSyntaxException pse) {
            // Not a valid glob pattern. Abandon filter.
          }
        }

        resetGlobFilter();

        // Check for directory change action
        boolean isDir = (selectedFile != null && selectedFile.isDirectory());
        boolean isTrav = (selectedFile != null && chooser.isTraversable(selectedFile));
        boolean isDirSelEnabled = chooser.isDirectorySelectionEnabled();
        boolean isFileSelEnabled = chooser.isFileSelectionEnabled();
        boolean isCtrl =
            (e != null
                && (e.getModifiers() & Toolkit.getDefaultToolkit().getMenuShortcutKeyMask()) != 0);

        if (isDir && isTrav && (isCtrl || !isDirSelEnabled)) {
          changeDirectory(selectedFile);
          return;
        } else if ((isDir || !isFileSelEnabled)
            && (!isDir || !isDirSelEnabled)
            && (!isDirSelEnabled || selectedFile.exists())) {
          selectedFile = null;
        }
      }

      if (selectedFiles != null || selectedFile != null) {
        if (selectedFiles != null || chooser.isMultiSelectionEnabled()) {
          if (selectedFiles == null) {
            selectedFiles = new File[] {selectedFile};
          }
          chooser.setSelectedFiles(selectedFiles);
          // Do it again. This is a fix for bug 4949273 to force the
          // selected value in case the ListSelectionModel clears it
          // for non-existing file names.
          chooser.setSelectedFiles(selectedFiles);
        } else {
          chooser.setSelectedFile(selectedFile);
        }
        chooser.approveSelection();
      } else {
        if (chooser.isMultiSelectionEnabled()) {
          chooser.setSelectedFiles(null);
        } else {
          chooser.setSelectedFile(null);
        }
        chooser.cancelSelection();
      }
    }