/**
* Start modem command manager.
*
* @throws Exception the exception
*/
public void startModemCommandManager() throws Exception {
CommPortIdentifier portIdentifier = CommPortIdentifier.getPortIdentifier(this.commandPortName);
if (portIdentifier.isCurrentlyOwned()) {
logger.error("Serial port " + this.commandPortName + " is currently in use");
}
CommPort commPort = portIdentifier.open(this.getClass().getName(), 2000);
if (commPort instanceof SerialPort) {
modemComPort = (SerialPort) commPort;
modemComPort.setSerialPortParams(
9600, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
modemComPort.notifyOnDataAvailable(true);
commandInputStream = new DataInputStream(modemComPort.getInputStream());
serialCommandReader = new SerialCommandReader(commandInputStream, this);
modemComPort.addEventListener(serialCommandReader);
commandOutputStream = new DataOutputStream(modemComPort.getOutputStream());
this.sendCommandToModem(ATCommands.DISABLE_ECHO);
this.sendCommandToModem(ATCommands.DISABLE_DIAGNOSTIC);
this.sendCommandToModem(ATCommands.END_CALL);
this.sendCommandToModem(ATCommands.CHECK_PIN);
}
}
/**
* Gets the serial port on the given port name. Throws an {@link IOException} if it does not
* succeed in doing so.
*
* @param portName The port name.
* @return The port.
* @throws IOException If the port could not be opened.
*/
private final SerialPort getSerialPort(final String portName) throws IOException {
try {
final CommPortIdentifier identifier = CommPortIdentifier.getPortIdentifier(portName);
if (identifier.isCurrentlyOwned()) {
throw new IOException(
"The port specified ["
+ portName
+ "] is already in use by ["
+ identifier.getCurrentOwner()
+ "] !");
}
final CommPort rawPort = identifier.open("DOM_SER_DRV", 2000);
if (rawPort instanceof SerialPort) {
final SerialPort port = (SerialPort) rawPort;
port.setSerialPortParams(
BAUDRATE, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
return port;
} else {
throw new IOException("Port [" + portName + "] is not a serial port !");
}
} catch (NoSuchPortException e) {
throw new IOException("The port specified [" + portName + "] does not exist !", e);
} catch (PortInUseException e) {
throw new IOException("The port specified [" + portName + "] is already in use !");
} catch (UnsupportedCommOperationException e) {
throw new IOException("Unsupported comm operation when setting the serial parameters !", e);
}
}
/**
* Start call.
*
* @throws Exception the exception
*/
public void startCall() throws Exception {
CommPortIdentifier portIdentifier = CommPortIdentifier.getPortIdentifier(this.streamPortName);
if (portIdentifier.isCurrentlyOwned()) {
logger.error("Serial port " + this.streamPortName + " is currently in use");
}
CommPort commPort = portIdentifier.open(this.getClass().getName(), 2000);
if (commPort instanceof SerialPort) {
voiceStreamCommPort = (SerialPort) commPort;
voiceStreamCommPort.setSerialPortParams(
230400, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
voiceInputStream = new DataInputStream(voiceStreamCommPort.getInputStream());
voiceOutputStream = new DataOutputStream(voiceStreamCommPort.getOutputStream());
serialVoiceReader = new SerialVoiceReader(voiceInputStream, af);
serialVoiceWriter = new SerialVoiceWriter(voiceOutputStream, af, playMessage);
(new Thread(serialVoiceReader, "VoiceReader")).start();
(new Thread(serialVoiceWriter, "VoiceWriter")).start();
}
}
public CommDriverDS2480B(CommPortIdentifier identifier) throws PortInUseException {
System.out.println(String.format("Opening %s", identifier.getName()));
if (identifier.isCurrentlyOwned())
throw new IllegalStateException("Comm port owned by someone else");
CommPort unknownPort = identifier.open(this.getClass().getName(), TIMEOUT_OPEN_MILLIS);
if (!(unknownPort instanceof SerialPort)) throw new IllegalStateException("not a serial port");
this.port = (SerialPort) unknownPort;
try {
// this.port.setSerialPortParams(9600,SerialPort.DATABITS_8,SerialPort.STOPBITS_1,SerialPort.PARITY_NONE);
this.port.setFlowControlMode(SerialPort.FLOWCONTROL_NONE);
// flashRTS();
input = new DataInputStream(new DebugInputStream(debug, this.port.getInputStream()));
output = new DataOutputStream(new DebugOutputStream(debug, this.port.getOutputStream()));
// cause software reset by using PARITY_SPACE for one byte...
System.out.println("initial hardware reset/clock sync");
this.port.setSerialPortParams(
9600, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_SPACE);
output.write(0x00);
Thread.sleep(100);
// send sync (reset) pulse for clock calibration
this.port.setSerialPortParams(
9600, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
output.write(Integer.parseInt("11000001", 2));
output.flush();
Thread.sleep(50);
// note, no response byte generated
} catch (UnsupportedCommOperationException e) {
throw new IllegalStateException("port did not accept params", e);
} catch (IOException e) {
throw new IllegalStateException("port did not accept params", e);
} catch (InterruptedException e) {
throw new IllegalStateException("port did not accept params", e);
}
}
public CardReader(String portName)
throws IOException, PortInUseException, UnsupportedCommOperationException,
NoSuchPortException {
CommPortIdentifier portIdentifier = CommPortIdentifier.getPortIdentifier(portName);
if (portIdentifier.isCurrentlyOwned()) {
System.out.println("Error: Port is currently in use");
} else {
int timeout = 2000;
CommPort commPort = portIdentifier.open(this.getClass().getName(), timeout);
if (commPort instanceof SerialPort) {
SerialPort serialPort = (SerialPort) commPort;
serialPort.setSerialPortParams(
9600, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
in = serialPort.getInputStream();
} else {
System.out.println("Error: Only serial ports are handled by this example.");
}
}
}
private SerialPort connectSerial(String portName)
throws NoSuchPortException, PortInUseException, UnsupportedCommOperationException {
SerialPort serialPort = null;
CommPortIdentifier portIdentifier = CommPortIdentifier.getPortIdentifier(portName);
if (portIdentifier.isCurrentlyOwned()) {
System.out.println("Error: Port is currently in use");
} else {
CommPort commPort = portIdentifier.open(this.getClass().getName(), 2000);
if (commPort instanceof SerialPort) {
serialPort = (SerialPort) commPort;
serialPort.setSerialPortParams(
57600, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
// serialPort.setSerialPortParams(115200, SerialPort.DATABITS_8,
// SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
} else {
System.out.println("Error: Only serial ports are handled by this example.");
}
}
return serialPort;
}
/** @see com.svhelloworld.knotlog.engine.sources.StreamedSource#open() */
@Override
public InputStream open() {
try {
// make sure the specified port is available
CommPortIdentifier identifier = CommPortIdentifier.getPortIdentifier(config.getName());
if (identifier.isCurrentlyOwned()) {
throw new SerialPortOccupiedException(
config.getName() + " port is currently opened by another application");
}
// open up the port
CommPort port = identifier.open(getOwnerName(), PORT_TIMEOUT);
if (port instanceof SerialPort) {
// configure serial port
serialPort = (SerialPort) port;
serialPort.setSerialPortParams(
config.getBaudRate(),
config.getDataBits().getRXTXConstant(),
config.getStopBit().getRXTXConstant(),
config.getParity().getRXTXConstant());
/*
* the following 2 lines fix the exception:
* "IOException: Underlying input stream returned zero bytes"
* that is thrown when we read from the InputStream.
*/
serialPort.enableReceiveTimeout(PORT_TIMEOUT);
serialPort.enableReceiveThreshold(0);
InputStream is = serialPort.getInputStream();
return is;
}
// not a serial port
throw new SerialPortException("must operate against a serial port");
} catch (PortInUseException e) {
throw new SerialPortOccupiedException(e.getMessage(), e);
} catch (Exception e) {
throw new SerialPortException(e.getMessage(), e);
}
}
void connect(String portName) throws Exception {
CommPortIdentifier portIdentifier = CommPortIdentifier.getPortIdentifier(portName);
if (portIdentifier.isCurrentlyOwned()) {
System.out.println("Error: Port is currently in use");
} else {
CommPort commPort = portIdentifier.open(this.getClass().getName(), 2000);
if (commPort instanceof SerialPort) {
SerialPort mSerialPort = (SerialPort) commPort;
mSerialPort.setSerialPortParams(
57600, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
InputStream mIn = mSerialPort.getInputStream();
OutputStream mOut = mSerialPort.getOutputStream();
(new Thread(new SerialReader(mIn))).start();
(new Thread(new SerialWriter(mOut))).start();
} else {
System.out.println("Error: Only serial ports are handled by this example.");
}
}
}
public static void main(String[] args) {
boolean boolArgs = false;
if ((args.length == 0) || (args.length == 1)) {
log.error(
MARKER_RunPcOpRs1Sender,
"{} please input device name (e.g. /dev/ttyUSB0) and input file",
Thread.currentThread().getStackTrace()[1].getMethodName());
} else if (args.length > 2) {
log.error(
MARKER_RunPcOpRs1Sender,
"{} too many args",
Thread.currentThread().getStackTrace()[1].getMethodName());
} else {
boolArgs = true;
}
if (boolArgs) {
String deviceName = args[0];
// String deviceName = "/dev/ttyUSB0";
log.debug(
MARKER_RunPcOpRs1Sender,
"{} [deviceName] {}",
Thread.currentThread().getStackTrace()[1].getMethodName(),
deviceName);
String signalPath = args[1];
log.debug(
MARKER_RunPcOpRs1Sender,
"{} [signalPath] {}",
Thread.currentThread().getStackTrace()[1].getMethodName(),
signalPath);
CommPortIdentifier portID;
// SerialPort port;
@SuppressWarnings("unchecked")
Enumeration<CommPortIdentifier> portList = CommPortIdentifier.getPortIdentifiers();
while (portList.hasMoreElements()) {
portID = (CommPortIdentifier) portList.nextElement();
log.debug(
MARKER_RunPcOpRs1Sender,
"{} [portID.getName()] {}",
Thread.currentThread().getStackTrace()[1].getMethodName(),
portID.getName());
if (portID.getPortType() == CommPortIdentifier.PORT_SERIAL) {
log.debug(
MARKER_RunPcOpRs1Sender,
"{} {} is a serial device",
Thread.currentThread().getStackTrace()[1].getMethodName(),
deviceName);
if (portID.getName().equals(deviceName)) {
if (portID.isCurrentlyOwned()) {
log.debug(
MARKER_RunPcOpRs1Sender,
"{} {} is currently owned",
Thread.currentThread().getStackTrace()[1].getMethodName(),
deviceName);
break;
} else {
log.debug(
MARKER_RunPcOpRs1Sender,
"{} {} can be used",
Thread.currentThread().getStackTrace()[1].getMethodName(),
deviceName);
PcOpRs1Sender rxtx = new PcOpRs1Sender(deviceName, signalPath);
if (rxtx.openSerialPort()) {
if (rxtx.setSerialPort()) {
rxtx.send0x74();
} else {
break;
}
} else {
break;
}
}
} else {
log.debug(
MARKER_RunPcOpRs1Sender,
"{} {} is not match {}",
Thread.currentThread().getStackTrace()[1].getMethodName(),
portID.getName(),
deviceName);
}
} else if (portID.getPortType() == CommPortIdentifier.PORT_PARALLEL) {
log.debug(
MARKER_RunPcOpRs1Sender,
"{} {} is a parallel device",
Thread.currentThread().getStackTrace()[1].getMethodName(),
deviceName);
break;
} else {
log.debug(
MARKER_RunPcOpRs1Sender,
"{} {} is an unknown device",
Thread.currentThread().getStackTrace()[1].getMethodName(),
deviceName);
break;
}
} // while()
} // if bool
} // main()
// open a serial connection to a device. We won't know it's the robot until
public int OpenPort(String portName) {
if (portOpened && portName.equals(recentPort)) return 0;
ClosePort();
Log("<font color='green'>Connecting to " + portName + "...</font>\n");
// find the port
try {
portIdentifier = CommPortIdentifier.getPortIdentifier(portName);
} catch (Exception e) {
Log("<span style='color:red'>Ports could not be identified:" + e.getMessage() + "</span>\n");
e.printStackTrace();
return 1;
}
if (portIdentifier.isCurrentlyOwned()) {
Log(
"<span style='color:red'>Error: Another program is currently using this port."
+ "</span>\n");
return 2;
}
// open the port
try {
commPort = portIdentifier.open("DrawbotGUI", 2000);
} catch (Exception e) {
Log("Port could not be opened:" + e.getMessage() + NL);
e.printStackTrace();
return 3;
}
if ((commPort instanceof SerialPort) == false) {
Log("<span style='color:red'>Only serial ports are handled by this example." + "</span>\n");
return 4;
}
// set the port parameters (like baud rate)
serialPort = (SerialPort) commPort;
try {
serialPort.setSerialPortParams(
BAUD_RATE, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
} catch (Exception e) {
Log("<span style='color:red'>Port could not be configured:" + e.getMessage() + "</span>\n");
return 5;
}
try {
in = serialPort.getInputStream();
out = serialPort.getOutputStream();
} catch (Exception e) {
Log("<span style='color:red'>Streams could not be opened:" + e.getMessage() + "</span>\n");
return 6;
}
try {
serialPort.addEventListener(this);
serialPort.notifyOnDataAvailable(true);
} catch (TooManyListenersException e) {
Log("<span style='color:red'>Streams could not be opened:" + e.getMessage() + "</span>\n");
return 7;
}
Log("<span style='green'>Opened.</span>\n");
SetRecentPort(portName);
portOpened = true;
UpdateMenuBar();
return 0;
}