Esempio n. 1
0
 private void stopThread() {
   isRunning = false;
   try {
     joinX(500);
   } catch (InterruptedException ex) {
   }
   if (NxtRobot.getDebugLevel() >= DEBUG_LEVEL_LOW)
     if (isAlive())
       DebugConsole.show(
           "DEBUG: PrototypeSendorThread stopping failed (port: " + getPortLabel() + ")");
     else
       DebugConsole.show(
           "DEBUG: PrototypeSensorThread successfully stopped (port: " + getPortLabel() + ")");
 }
Esempio n. 2
0
  private synchronized void read(boolean check, int[] ain, int[] din) {
    if (check) checkConnect();
    if (ain.length != 5) {
      new ShowError("Error in PrototypeSensor.read().\n" + "Parameter ain must have length 5.");
      return;
    }
    if (din.length != 6) {
      new ShowError("Error in PrototypeSensor.read().\n" + "Parameter din must have length 6.");
      return;
    }
    byte[] in = getData(REGISTERBASE, 11);
    // Convert to int
    int[] data = new int[11];
    for (int i = 0; i < 11; i++) data[i] = in[i] & 0xFF;

    // Analog inputs: base -> upper 8 bits, base+1 -> lower 2 bits
    for (int i = 0; i < 5; i++) ain[i] = 4 * data[2 * i] + data[2 * i + 1];

    // Digital inputs
    int bitValue = 1;
    for (int i = 0; i < 6; i++) {
      if ((control & bitValue) != 0) din[i] = -1;
      else din[i] = (data[10] & bitValue) / bitValue;
      bitValue *= 2;
    }

    if (NxtRobot.getDebugLevel() >= DEBUG_LEVEL_MEDIUM)
      DebugConsole.show("DEBUG: read() values:\n" + getAnalogValues(ain) + getDigitalValues(din));
  }
Esempio n. 3
0
 protected void init() {
   if (NxtRobot.getDebugLevel() >= DEBUG_LEVEL_MEDIUM)
     DebugConsole.show("DEBUG: Prototype.init() called (Port: " + getPortLabel() + ")");
   super.init();
   sendData(IOCONTROL, (byte) 0); // All inputs
   sendData(SAMPLING, (byte) 4); // minimum sampling period
 }
  private static void runToolBus(final ToolBus toolbus) {
    try {
      toolbus.parsecup();
      toolbus.prepare();
      Thread thread =
          new Thread(
              new Runnable() {
                public void run() {
                  toolbus.execute();
                }
              });
      thread.setName(PLUGIN_ID);
      thread.start();

      DebugConsole debugConsole = new DebugConsole(toolbus);
      debugConsole.show();
    } catch (Exception rex) {
      rex.printStackTrace();
      throw new RuntimeException(rex);
    }
  }
Esempio n. 5
0
 /**
  * Writes the given bit state (low/high) to the digital output channels. Only channels set as
  * output will be affected. Input channel bits are ignored.
  *
  * @param dout an integer array of length 6 that holds the bit state: 0->low, 1->high
  */
 public synchronized void write(int[] dout) {
   checkConnect();
   if (dout.length != 6) {
     new ShowError("Error in PrototypeSensor.write().\n" + "Parameter dout must have length 6.");
     return;
   }
   for (int i = 0; i < 6; i++) {
     if (dout[i] < 0 || dout[i] > 1) {
       new ShowError("Error in PrototypeSensor.read().\n" + "Parameter values must be 0 or 1.");
       return;
     }
   }
   int bitValue = 1;
   int value = 0;
   for (int i = 0; i < 6; i++) {
     if (dout[i] == 1) value = value + dout[i] * bitValue;
     bitValue *= 2;
   }
   sendData(DIGITALOUT, (byte) value);
   if (NxtRobot.getDebugLevel() >= DEBUG_LEVEL_MEDIUM)
     DebugConsole.show("DEBUG: write():\n" + value);
 }
Esempio n. 6
0
    public void run() {
      if (NxtRobot.getDebugLevel() >= DEBUG_LEVEL_LOW) DebugConsole.show("PrTh started");

      int[] ain = new int[5];
      int[] din = new int[6];
      for (int i = 0; i < 5; i++) ain[i] = 0;
      for (int i = 0; i < 6; i++) din[i] = 0;
      int[] ain_new = new int[5];
      int[] din_new = new int[6];

      isRunning = true;
      while (isRunning) {
        if (prototypeListener != null) {
          Tools.delay(pollDelay);
          boolean rc = readSensor(ain_new, din_new);
          if (!rc) // Error
          continue;
          boolean isAnalogChanged = false;
          for (int i = 0; i < 5; i++) {
            if (ain_new[i] == ain[i]) ain_new[i] = -1;
            else {
              ain[i] = ain_new[i];
              isAnalogChanged = true;
            }
          }
          boolean isDigitalChanged = false;
          for (int i = 0; i < 6; i++) {
            if (din_new[i] == din[i]) din_new[i] = -1;
            else {
              din[i] = din_new[i];
              isDigitalChanged = true;
            }
          }
          if (isAnalogChanged) {
            if (inAnalogCallback) {
              if (NxtRobot.getDebugLevel() >= DEBUG_LEVEL_LOW)
                DebugConsole.show(
                    "DEBUG: Prototype event 'ainChanged' (port: "
                        + getPortLabel()
                        + ") -------- rejected: Other callback underway!");
            } else {
              inAnalogCallback = true;
              if (NxtRobot.getDebugLevel() >= DEBUG_LEVEL_LOW)
                DebugConsole.show(
                    "DEBUG: Prototype event 'ainChanged' (port: " + getPortLabel() + ")");
              prototypeListener.ainChanged(getPort(), ain_new);
              inAnalogCallback = false;
            }
          }
          if (isDigitalChanged) {
            if (inDigitalCallback) {
              if (NxtRobot.getDebugLevel() >= DEBUG_LEVEL_LOW)
                DebugConsole.show(
                    "DEBUG: Prototype event 'dinChanged' (port: "
                        + getPortLabel()
                        + ") -------- rejected: Other callback underway!");
            } else {
              inDigitalCallback = true;
              if (NxtRobot.getDebugLevel() >= DEBUG_LEVEL_LOW)
                DebugConsole.show(
                    "DEBUG: Prototype event 'dinChanged' (port: " + getPortLabel() + ")");
              prototypeListener.dinChanged(getPort(), din_new);
              inDigitalCallback = false;
            }
          }
        }
      }
    }
Esempio n. 7
0
 private PrototypeSensorThread() {
   if (NxtRobot.getDebugLevel() >= DEBUG_LEVEL_LOW) DebugConsole.show("PrTh created");
 }
Esempio n. 8
0
 protected void cleanup() {
   if (NxtRobot.getDebugLevel() >= DEBUG_LEVEL_MEDIUM)
     DebugConsole.show("DEBUG: Prototype.cleanup() called (Port: " + getPortLabel() + ")");
   if (pst != null) pst.stopThread();
   sendData(IOCONTROL, (byte) 0); // All inputs
 }