public SPINETest() {
try {
// Initialize SPINE by passing the fileName with the configuration properties
manager = SPINEFactory.createSPINEManager("resources/SPINETestApp.properties");
// ... then we need to register a SPINEListener implementation to the SPINE manager instance
// (I register myself since I'm a SPINEListener implementation!)
manager.addListener(this);
// we could change the logging level to avoid e.g. prints for the ongoing and incoming low
// level messages.
SPINEManager.getLogger().setLevel(Level.ALL);
// We could even decide to change the default discoveryProcedureTimeout; after that: ok ...
/* manager.setDiscoveryProcedureTimeout(1000); */
// ... let's start playing!
manager.discoveryWsn();
} catch (InstantiationException e) {
// if we are here, then the SPINEManager initialization did not work properly
e.printStackTrace();
}
}
public void discoveryCompleted(Vector activeNodes) {
// we loop over the discovered nodes (hopefully, at least a node's showed up!)
Node curr = null;
for (int j = 0; j < activeNodes.size(); j++) {
curr = (Node) activeNodes.elementAt(j);
// we print for each node its details (nodeID, sensors and functions provided)
System.out.println(curr);
// for each node, we look for specific services
for (int i = 0; i < curr.getSensorsList().size(); i++) {
byte sensor = ((Sensor) curr.getSensorsList().elementAt(i)).getCode();
// if the current node has an accelerometer, then...
if (sensor == SPINESensorConstants.ACC_SENSOR) {
// ... we first setup that sensor, specifying its sampling time and time scale; then ...
SpineSetupSensor sss = new SpineSetupSensor();
sss.setSensor(sensor);
sss.setTimeScale(SPINESensorConstants.MILLISEC);
sss.setSamplingTime(SAMPLING_TIME);
manager.setup(curr, sss);
// ... we can setup a specific function (in this case a Feature) on that sensor; then ...
FeatureSpineSetupFunction ssf = new FeatureSpineSetupFunction();
ssf.setSensor(sensor);
ssf.setWindowSize(WINDOW_SIZE);
ssf.setShiftSize(SHIFT_SIZE);
manager.setup(curr, ssf);
// ... we can activate that function with function specific parameters
// (for Feature they are the desired feature extractors); we can also ...
FeatureSpineFunctionReq sfr = new FeatureSpineFunctionReq();
sfr.setSensor(sensor);
sfr.add(
new Feature(
SPINEFunctionConstants.MODE,
((Sensor) curr.getSensorsList().elementAt(i)).getChannelBitmask()));
sfr.add(
new Feature(
SPINEFunctionConstants.MEDIAN,
((Sensor) curr.getSensorsList().elementAt(i)).getChannelBitmask()));
sfr.add(
new Feature(
SPINEFunctionConstants.MAX,
((Sensor) curr.getSensorsList().elementAt(i)).getChannelBitmask()));
sfr.add(
new Feature(
SPINEFunctionConstants.MIN,
((Sensor) curr.getSensorsList().elementAt(i)).getChannelBitmask()));
manager.activate(curr, sfr);
// ... split a more complex activation in multiple activations
// (if the specific function implementation in the node side allows that); of course we
// always can ...
sfr = new FeatureSpineFunctionReq();
sfr.setSensor(sensor);
sfr.add(
new Feature(
SPINEFunctionConstants.MEAN,
((Sensor) curr.getSensorsList().elementAt(i)).getChannelBitmask()));
sfr.add(
new Feature(
SPINEFunctionConstants.AMPLITUDE,
((Sensor) curr.getSensorsList().elementAt(i)).getChannelBitmask()));
manager.activate(curr, sfr);
// SetUp Alarm Engine
// Window and Shift may be set to value different from the feature engine ones.
// here we use the same values for debigging proposes
AlarmSpineSetupFunction ssf2 = new AlarmSpineSetupFunction();
ssf2.setSensor(sensor);
ssf2.setWindowSize(WINDOW_SIZE);
ssf2.setShiftSize(SHIFT_SIZE);
manager.setup(curr, ssf2);
// Activate alarm on MAX value (one of the features computed above) on CH1
// alarm sent when MAX > upperThresold
AlarmSpineFunctionReq sfr2 = new AlarmSpineFunctionReq();
int lowerThreshold = 20;
int upperThreshold = 40;
sfr2.setDataType(SPINEFunctionConstants.MAX);
sfr2.setSensor(SPINESensorConstants.ACC_SENSOR);
sfr2.setValueType((SPINESensorConstants.CH1_ONLY));
sfr2.setLowerThreshold(lowerThreshold);
sfr2.setUpperThreshold(upperThreshold);
sfr2.setAlarmType(SPINEFunctionConstants.ABOVE_THRESHOLD);
manager.activate(curr, sfr2);
// Activate alarm on AMPLITUDE value (one of the features computed above) on CH2
// alarm sent when AMPLITUDE < lowerThreshold
lowerThreshold = 2000;
upperThreshold = 1000;
sfr2.setDataType(SPINEFunctionConstants.AMPLITUDE);
sfr2.setSensor(SPINESensorConstants.ACC_SENSOR);
sfr2.setValueType((SPINESensorConstants.CH2_ONLY));
sfr2.setLowerThreshold(lowerThreshold);
sfr2.setUpperThreshold(upperThreshold);
sfr2.setAlarmType(SPINEFunctionConstants.BELOW_THRESHOLD);
manager.activate(curr, sfr2);
}
// repeat this process for other desired sensors; after that we can finally ...
else if (sensor == SPINESensorConstants.INTERNAL_TEMPERATURE_SENSOR) {
SpineSetupSensor sss = new SpineSetupSensor();
sss.setSensor(sensor);
sss.setTimeScale(SPINESensorConstants.MILLISEC);
sss.setSamplingTime(OTHER_SAMPLING_TIME);
manager.setup(curr, sss);
FeatureSpineSetupFunction ssf = new FeatureSpineSetupFunction();
ssf.setSensor(sensor);
ssf.setWindowSize(OTHER_WINDOW_SIZE);
ssf.setShiftSize(OTHER_SHIFT_SIZE);
manager.setup(curr, ssf);
FeatureSpineFunctionReq sfr = new FeatureSpineFunctionReq();
sfr.setSensor(sensor);
sfr.add(
new Feature(
SPINEFunctionConstants.MODE,
((Sensor) curr.getSensorsList().elementAt(i)).getChannelBitmask()));
sfr.add(
new Feature(
SPINEFunctionConstants.MEDIAN,
((Sensor) curr.getSensorsList().elementAt(i)).getChannelBitmask()));
sfr.add(
new Feature(
SPINEFunctionConstants.MAX,
((Sensor) curr.getSensorsList().elementAt(i)).getChannelBitmask()));
sfr.add(
new Feature(
SPINEFunctionConstants.MIN,
((Sensor) curr.getSensorsList().elementAt(i)).getChannelBitmask()));
manager.activate(curr, sfr);
// SetUp Alarm Engine
// Same Window and Shift as before
AlarmSpineSetupFunction ssf3 = new AlarmSpineSetupFunction();
ssf3.setSensor(sensor);
ssf3.setWindowSize(WINDOW_SIZE);
ssf3.setShiftSize(SHIFT_SIZE);
manager.setup(curr, ssf3);
// Activate alarm on MIN value (one of the features computed above)on CH1
// alarm sent when lowerThreshold < MIN < upperThreshold
AlarmSpineFunctionReq sfr3 = new AlarmSpineFunctionReq();
int lowerThreshold = 1000;
int upperThreshold = 3000;
sfr3.setDataType(SPINEFunctionConstants.MIN);
sfr3.setSensor(sensor);
sfr3.setValueType((SPINESensorConstants.CH1_ONLY));
sfr3.setLowerThreshold(lowerThreshold);
sfr3.setUpperThreshold(upperThreshold);
sfr3.setAlarmType(SPINEFunctionConstants.IN_BETWEEN_THRESHOLDS);
manager.activate(curr, sfr3);
}
}
}
// ... start the sensor network sensing and computing our aforeactivated services.
if (activeNodes.size() > 0)
manager.startWsn(
true,
true); // we can tune a few node parameters at run-time for reducing the power consumption
// and the packets drop.
}
public void received(Data data) {
// the specific application logic behaves w.r.t. the type of data received
System.out.println(data);
switch (data.getFunctionCode()) {
case SPINEFunctionConstants.FEATURE:
{
features = ((FeatureData) data).getFeatures();
counter++;
// even this simple application shows us up some nice SPINE properties; in fact ...
if (counter == 5) {
// it's possible to deactivate functions computation at runtime (even when the radio on
// the node works in low-power mode)
FeatureSpineFunctionReq sfr = new FeatureSpineFunctionReq();
sfr.setSensor(features[0].getSensorCode());
sfr.remove(new Feature(features[0].getFeatureCode(), SPINESensorConstants.ALL));
manager.deactivate(data.getNode(), sfr);
}
if (counter == 10) {
// and, of course, we can activate new functions at runtime
FeatureSpineFunctionReq sfr = new FeatureSpineFunctionReq();
sfr.setSensor(features[0].getSensorCode());
sfr.add(new Feature(SPINEFunctionConstants.RANGE, SPINESensorConstants.CH1_ONLY));
manager.activate(data.getNode(), sfr);
}
if (counter == 20) {
// when we are set, we can decide to ...
// stop the WSN, forcing a 'software' reset of the nodes
/* manager.resetWsn(); */
// or just deregister ourself to further SPINE events.
// manager.deregisterListener(this);
}
break;
}
case SPINEFunctionConstants.ONE_SHOT:
// OneShotData oneShot = (OneShotData)data; // if needed 'data' can be casted to
// spine.datamodel.OneShotData
break;
case SPINEFunctionConstants.ALARM:
// AlarmData alarm = (AlarmData)data; // if needed 'data' can be casted to
// spine.datamodel.AlarmData
counter_alarm++;
if (counter_alarm == 20) {
AlarmSpineFunctionReq sfr2 = new AlarmSpineFunctionReq();
sfr2.setSensor(SPINESensorConstants.ACC_SENSOR);
sfr2.setAlarmType(SPINEFunctionConstants.ABOVE_THRESHOLD);
sfr2.setDataType(SPINEFunctionConstants.MAX);
sfr2.setValueType((SPINESensorConstants.CH1_ONLY));
manager.deactivate(data.getNode(), sfr2);
}
break;
}
}