/**
* Modifies the passed-in token list to start at the specified offset. For example, if the token
* list covered positions 20-60 in the document (inclusive) like so:
*
* <pre>
* [token1] -> [token2] -> [token3] -> [token4]
* 20 30 31 40 41 50 51 60
* </pre>
*
* and you used this method to make the token list start at position 44, then the token list would
* be modified to be the following:
*
* <pre>
* [part-of-old-token3] -> [token4]
* 44 50 51 60
* </pre>
*
* Tokens that come before the specified position are forever lost, and the token containing that
* position is made to begin at that position if necessary. All token types remain the same as
* they were originally.
*
* <p>This method can be useful if you are only interested in part of a token list (i.e., the line
* it represents), but you don't want to modify the token list yourself.
*
* @param tokenList The list to make start at the specified position. This parameter is modified.
* @param pos The position at which the new token list is to start. If this position is not in the
* passed-in token list, returned token list will either be <code>null</code> or the
* unpaintable token(s) at the end of the passed-in token list.
* @param e How to expand tabs.
* @param textArea The text area from which the token list came.
* @param x0 The initial x-pixel position of the old token list.
* @param tempToken A temporary token to use when creating the token list result. This may be
* <code>null</code> but callers can pass in a "buffer" token for performance if desired.
* @return Information about the "sub" token list. This will be <code>null</code> if <code>pos
* </code> was not a valid offset into the token list.
* @see #getSubTokenList(Token, int, TabExpander, RSyntaxTextArea, float)
*/
public static TokenSubList getSubTokenList(
Token tokenList,
int pos,
TabExpander e,
final RSyntaxTextArea textArea,
float x0,
TokenImpl tempToken) {
if (tempToken == null) {
tempToken = new TokenImpl();
}
Token t = tokenList;
// Loop through the token list until you find the one that contains
// pos. Remember the cumulative width of all of these tokens.
while (t != null && t.isPaintable() && !t.containsPosition(pos)) {
x0 += t.getWidth(textArea, e, x0);
t = t.getNextToken();
}
// Make the token that contains pos start at pos.
if (t != null && t.isPaintable()) {
if (t.getOffset() != pos) {
// Number of chars between p0 and token start.
int difference = pos - t.getOffset();
x0 += t.getWidthUpTo(t.length() - difference + 1, textArea, e, x0);
tempToken.copyFrom(t);
tempToken.makeStartAt(pos);
return new TokenSubList(tempToken, x0);
} else { // t.getOffset()==pos
return new TokenSubList(t, x0);
}
}
// This could be a null token, so we need to just return it.
return new TokenSubList(tokenList, x0);
// return null;
}
/**
* Draws a single view (i.e., a line of text for a wrapped view), wrapping the text onto multiple
* lines if necessary. Any selected text is rendered with the editor's "selected text" color.
*
* @param painter The painter to use to render tokens.
* @param g The graphics context in which to paint.
* @param r The rectangle in which to paint.
* @param view The <code>View</code> to paint.
* @param fontHeight The height of the font being used.
* @param y The y-coordinate at which to begin painting.
* @param selStart The start of the selection.
* @param selEnd The end of the selection.
*/
protected void drawViewWithSelection(
TokenPainter painter,
Graphics2D g,
Rectangle r,
View view,
int fontHeight,
int y,
int selStart,
int selEnd) {
float x = r.x;
LayeredHighlighter h = (LayeredHighlighter) host.getHighlighter();
RSyntaxDocument document = (RSyntaxDocument) getDocument();
Element map = getElement();
int p0 = view.getStartOffset();
int lineNumber = map.getElementIndex(p0);
int p1 = view.getEndOffset(); // - 1;
setSegment(p0, p1 - 1, document, drawSeg);
// System.err.println("drawSeg=='" + drawSeg + "' (p0/p1==" + p0 + "/" + p1 + ")");
int start = p0 - drawSeg.offset;
Token token = document.getTokenListForLine(lineNumber);
// If this line is an empty line, then the token list is simply a
// null token. In this case, the line highlight will be skipped in
// the loop below, so unfortunately we must manually do it here.
if (token != null && token.getType() == Token.NULL) {
h.paintLayeredHighlights(g, p0, p1, r, host, this);
return;
}
// Loop through all tokens in this view and paint them!
while (token != null && token.isPaintable()) {
int p = calculateBreakPosition(p0, token, x);
x = r.x;
h.paintLayeredHighlights(g, p0, p, r, host, this);
while (token != null && token.isPaintable() && token.getEndOffset() - 1 < p) { // <=p) {
// Selection starts in this token
if (token.containsPosition(selStart)) {
if (selStart > token.getOffset()) {
tempToken.copyFrom(token);
tempToken.textCount = selStart - tempToken.getOffset();
x = painter.paint(tempToken, g, x, y, host, this);
tempToken.textCount = token.length();
tempToken.makeStartAt(selStart);
// Clone required since token and tempToken must be
// different tokens for else statement below
token = new TokenImpl(tempToken);
}
int selCount = Math.min(token.length(), selEnd - token.getOffset());
if (selCount == token.length()) {
x = painter.paintSelected(token, g, x, y, host, this);
} else {
tempToken.copyFrom(token);
tempToken.textCount = selCount;
x = painter.paintSelected(tempToken, g, x, y, host, this);
tempToken.textCount = token.length();
tempToken.makeStartAt(token.getOffset() + selCount);
token = tempToken;
x = painter.paint(token, g, x, y, host, this);
}
}
// Selection ends in this token
else if (token.containsPosition(selEnd)) {
tempToken.copyFrom(token);
tempToken.textCount = selEnd - tempToken.getOffset();
x = painter.paintSelected(tempToken, g, x, y, host, this);
tempToken.textCount = token.length();
tempToken.makeStartAt(selEnd);
token = tempToken;
x = painter.paint(token, g, x, y, host, this);
}
// This token is entirely selected
else if (token.getOffset() >= selStart && token.getEndOffset() <= selEnd) {
x = painter.paintSelected(token, g, x, y, host, this);
}
// This token is entirely unselected
else {
x = painter.paint(token, g, x, y, host, this);
}
token = token.getNextToken();
}
// If there's a token that's going to be split onto the next line
if (token != null && token.isPaintable() && token.getOffset() < p) {
int tokenOffset = token.getOffset();
Token orig = token;
token =
new TokenImpl(
drawSeg, tokenOffset - start, p - 1 - start, tokenOffset, token.getType());
// Selection starts in this token
if (token.containsPosition(selStart)) {
if (selStart > token.getOffset()) {
tempToken.copyFrom(token);
tempToken.textCount = selStart - tempToken.getOffset();
x = painter.paint(tempToken, g, x, y, host, this);
tempToken.textCount = token.length();
tempToken.makeStartAt(selStart);
// Clone required since token and tempToken must be
// different tokens for else statement below
token = new TokenImpl(tempToken);
}
int selCount = Math.min(token.length(), selEnd - token.getOffset());
if (selCount == token.length()) {
x = painter.paintSelected(token, g, x, y, host, this);
} else {
tempToken.copyFrom(token);
tempToken.textCount = selCount;
x = painter.paintSelected(tempToken, g, x, y, host, this);
tempToken.textCount = token.length();
tempToken.makeStartAt(token.getOffset() + selCount);
token = tempToken;
x = painter.paint(token, g, x, y, host, this);
}
}
// Selection ends in this token
else if (token.containsPosition(selEnd)) {
tempToken.copyFrom(token);
tempToken.textCount = selEnd - tempToken.getOffset();
x = painter.paintSelected(tempToken, g, x, y, host, this);
tempToken.textCount = token.length();
tempToken.makeStartAt(selEnd);
token = tempToken;
x = painter.paint(token, g, x, y, host, this);
}
// This token is entirely selected
else if (token.getOffset() >= selStart && token.getEndOffset() <= selEnd) {
x = painter.paintSelected(token, g, x, y, host, this);
}
// This token is entirely unselected
else {
x = painter.paint(token, g, x, y, host, this);
}
token = new TokenImpl(orig);
((TokenImpl) token).makeStartAt(p);
}
p0 = (p == p0) ? p1 : p;
y += fontHeight;
} // End of while (token!=null && token.isPaintable()).
// NOTE: We should re-use code from Token (paintBackground()) here,
// but don't because I'm just too lazy.
if (host.getEOLMarkersVisible()) {
g.setColor(host.getForegroundForTokenType(Token.WHITESPACE));
g.setFont(host.getFontForTokenType(Token.WHITESPACE));
g.drawString("\u00B6", x, y - fontHeight);
}
}
/**
* Draws a single view (i.e., a line of text for a wrapped view), wrapping the text onto multiple
* lines if necessary.
*
* @param painter The painter to use to render tokens.
* @param g The graphics context in which to paint.
* @param r The rectangle in which to paint.
* @param view The <code>View</code> to paint.
* @param fontHeight The height of the font being used.
* @param y The y-coordinate at which to begin painting.
*/
protected void drawView(
TokenPainter painter, Graphics2D g, Rectangle r, View view, int fontHeight, int y) {
float x = r.x;
LayeredHighlighter h = (LayeredHighlighter) host.getHighlighter();
RSyntaxDocument document = (RSyntaxDocument) getDocument();
Element map = getElement();
int p0 = view.getStartOffset();
int lineNumber = map.getElementIndex(p0);
int p1 = view.getEndOffset(); // - 1;
setSegment(p0, p1 - 1, document, drawSeg);
// System.err.println("drawSeg=='" + drawSeg + "' (p0/p1==" + p0 + "/" + p1 + ")");
int start = p0 - drawSeg.offset;
Token token = document.getTokenListForLine(lineNumber);
// If this line is an empty line, then the token list is simply a
// null token. In this case, the line highlight will be skipped in
// the loop below, so unfortunately we must manually do it here.
if (token != null && token.getType() == Token.NULL) {
h.paintLayeredHighlights(g, p0, p1, r, host, this);
return;
}
// Loop through all tokens in this view and paint them!
while (token != null && token.isPaintable()) {
int p = calculateBreakPosition(p0, token, x);
x = r.x;
h.paintLayeredHighlights(g, p0, p, r, host, this);
while (token != null && token.isPaintable() && token.getEndOffset() - 1 < p) { // <=p) {
x = painter.paint(token, g, x, y, host, this);
token = token.getNextToken();
}
if (token != null && token.isPaintable() && token.getOffset() < p) {
int tokenOffset = token.getOffset();
tempToken.set(
drawSeg.array, tokenOffset - start, p - 1 - start, tokenOffset, token.getType());
painter.paint(tempToken, g, x, y, host, this);
tempToken.copyFrom(token);
tempToken.makeStartAt(p);
token = new TokenImpl(tempToken);
}
p0 = (p == p0) ? p1 : p;
y += fontHeight;
} // End of while (token!=null && token.isPaintable()).
// NOTE: We should re-use code from Token (paintBackground()) here,
// but don't because I'm just too lazy.
if (host.getEOLMarkersVisible()) {
g.setColor(host.getForegroundForTokenType(Token.WHITESPACE));
g.setFont(host.getFontForTokenType(Token.WHITESPACE));
g.drawString("\u00B6", x, y - fontHeight);
}
}
/**
* Creates this token as a copy of the passed-in token.
*
* @param t2 The token from which to make a copy.
*/
public TokenImpl(Token t2) {
this();
copyFrom(t2);
}
/**
* Draws the passed-in text using syntax highlighting for the current language. Tokens are checked
* for being in a selected region, and are rendered appropriately if they are.
*
* @param painter The painter to render the tokens.
* @param token The list of tokens to draw.
* @param g The graphics context in which to draw.
* @param x The x-coordinate at which to draw.
* @param y The y-coordinate at which to draw.
* @param selStart The start of the selection.
* @param selEnd The end of the selection.
* @return The x-coordinate representing the end of the painted text.
*/
private float drawLineWithSelection(
TokenPainter painter, Token token, Graphics2D g, float x, float y, int selStart, int selEnd) {
float nextX = x; // The x-value at the end of our text.
boolean useSTC = host.getUseSelectedTextColor();
while (token != null && token.isPaintable() && nextX < clipEnd) {
// Selection starts in this token
if (token.containsPosition(selStart)) {
if (selStart > token.getOffset()) {
tempToken.copyFrom(token);
tempToken.textCount = selStart - tempToken.getOffset();
nextX = painter.paint(tempToken, g, nextX, y, host, this, clipStart);
tempToken.textCount = token.length();
tempToken.makeStartAt(selStart);
// Clone required since token and tempToken must be
// different tokens for else statement below
token = new TokenImpl(tempToken);
}
int tokenLen = token.length();
int selCount = Math.min(tokenLen, selEnd - token.getOffset());
if (selCount == tokenLen) {
nextX = painter.paintSelected(token, g, nextX, y, host, this, clipStart, useSTC);
} else {
tempToken.copyFrom(token);
tempToken.textCount = selCount;
nextX = painter.paintSelected(tempToken, g, nextX, y, host, this, clipStart, useSTC);
tempToken.textCount = token.length();
tempToken.makeStartAt(token.getOffset() + selCount);
token = tempToken;
nextX = painter.paint(token, g, nextX, y, host, this, clipStart);
}
}
// Selection ends in this token
else if (token.containsPosition(selEnd)) {
tempToken.copyFrom(token);
tempToken.textCount = selEnd - tempToken.getOffset();
nextX = painter.paintSelected(tempToken, g, nextX, y, host, this, clipStart, useSTC);
tempToken.textCount = token.length();
tempToken.makeStartAt(selEnd);
token = tempToken;
nextX = painter.paint(token, g, nextX, y, host, this, clipStart);
}
// This token is entirely selected
else if (token.getOffset() >= selStart && token.getEndOffset() <= selEnd) {
nextX = painter.paintSelected(token, g, nextX, y, host, this, clipStart, useSTC);
}
// This token is entirely unselected
else {
nextX = painter.paint(token, g, nextX, y, host, this, clipStart);
}
token = token.getNextToken();
}
// NOTE: We should re-use code from Token (paintBackground()) here,
// but don't because I'm just too lazy.
if (host.getEOLMarkersVisible()) {
g.setColor(host.getForegroundForTokenType(Token.WHITESPACE));
g.setFont(host.getFontForTokenType(Token.WHITESPACE));
g.drawString("\u00B6", nextX, y);
}
// Return the x-coordinate at the end of the painted text.
return nextX;
}