protected void movePolygon(Point previousMousePoint, Point mousePoint) {
// Intersect a ray through each mouse point, with a geoid passing through the reference
// elevation.
// If either ray fails to intersect the geoid, then ignore this event. Use the difference
// between the two
// intersected positions to move the control point's location.
View view = this.wwd.getView();
Globe globe = this.wwd.getModel().getGlobe();
Position refPos = this.polygon.getReferencePosition();
if (refPos == null) return;
Line ray = view.computeRayFromScreenPoint(mousePoint.getX(), mousePoint.getY());
Line previousRay =
view.computeRayFromScreenPoint(previousMousePoint.getX(), previousMousePoint.getY());
Vec4 vec = AirspaceEditorUtil.intersectGlobeAt(this.wwd, refPos.getElevation(), ray);
Vec4 previousVec =
AirspaceEditorUtil.intersectGlobeAt(this.wwd, refPos.getElevation(), previousRay);
if (vec == null || previousVec == null) {
return;
}
Position pos = globe.computePositionFromPoint(vec);
Position previousPos = globe.computePositionFromPoint(previousVec);
LatLon change = pos.subtract(previousPos);
this.polygon.move(new Position(change.getLatitude(), change.getLongitude(), 0.0));
}
protected void doMoveAirspaceLaterally(
WorldWindow wwd, Airspace airspace, Point mousePoint, Point previousMousePoint) {
// Intersect a ray throuh each mouse point, with a geoid passing through the reference
// elevation. Since
// most airspace control points follow a fixed altitude, this will track close to the intended
// mouse position.
// If either ray fails to intersect the geoid, then ignore this event. Use the difference
// between the two
// intersected positions to move the control point's location.
if (!(airspace instanceof Movable)) {
return;
}
Movable movable = (Movable) airspace;
View view = wwd.getView();
Globe globe = wwd.getModel().getGlobe();
Position refPos = movable.getReferencePosition();
if (refPos == null) return;
// Convert the reference position into a cartesian point. This assumes that the reference
// elevation is defined
// by the airspace's lower altitude.
Vec4 refPoint = null;
if (airspace.isTerrainConforming()[LOWER_ALTITUDE])
refPoint = wwd.getSceneController().getTerrain().getSurfacePoint(refPos);
if (refPoint == null) refPoint = globe.computePointFromPosition(refPos);
// Convert back to a position.
refPos = globe.computePositionFromPoint(refPoint);
Line ray = view.computeRayFromScreenPoint(mousePoint.getX(), mousePoint.getY());
Line previousRay =
view.computeRayFromScreenPoint(previousMousePoint.getX(), previousMousePoint.getY());
Vec4 vec = AirspaceEditorUtil.intersectGlobeAt(wwd, refPos.getElevation(), ray);
Vec4 previousVec = AirspaceEditorUtil.intersectGlobeAt(wwd, refPos.getElevation(), previousRay);
if (vec == null || previousVec == null) {
return;
}
Position pos = globe.computePositionFromPoint(vec);
Position previousPos = globe.computePositionFromPoint(previousVec);
LatLon change = pos.subtract(previousPos);
movable.move(new Position(change.getLatitude(), change.getLongitude(), 0.0));
this.fireAirspaceMoved(new AirspaceEditEvent(wwd, airspace, this));
}
/**
* Computes the lat/lon of the pickPoint over the world map
*
* @param dc the current <code>DrawContext</code>
* @param locationSW the screen location of the bottom left corner of the map
* @param mapSize the world map screen dimension in pixels
* @return the picked Position
*/
protected Position computePickPosition(DrawContext dc, Vec4 locationSW, Dimension mapSize) {
Position pickPosition = null;
Point pickPoint = dc.getPickPoint();
if (pickPoint != null) {
Rectangle viewport = dc.getView().getViewport();
// Check if pickpoint is inside the map
if (pickPoint.getX() >= locationSW.getX()
&& pickPoint.getX() < locationSW.getX() + mapSize.width
&& viewport.height - pickPoint.getY() >= locationSW.getY()
&& viewport.height - pickPoint.getY() < locationSW.getY() + mapSize.height) {
double lon = (pickPoint.getX() - locationSW.getX()) / mapSize.width * 360 - 180;
double lat =
(viewport.height - pickPoint.getY() - locationSW.getY()) / mapSize.height * 180 - 90;
double pickAltitude = 1000e3;
pickPosition = new Position(Angle.fromDegrees(lat), Angle.fromDegrees(lon), pickAltitude);
}
}
return pickPosition;
}
protected void setPolygonHeight(Point previousMousePoint, Point mousePoint) {
// Find the closest points between the rays through each screen point, and the ray from the
// control point
// and in the direction of the globe's surface normal. Compute the elevation difference between
// these two
// points, and use that as the change in polygon height.
Position referencePos = this.polygon.getReferencePosition();
if (referencePos == null) return;
Vec4 referencePoint = this.wwd.getModel().getGlobe().computePointFromPosition(referencePos);
Vec4 surfaceNormal =
this.wwd
.getModel()
.getGlobe()
.computeSurfaceNormalAtLocation(
referencePos.getLatitude(), referencePos.getLongitude());
Line verticalRay = new Line(referencePoint, surfaceNormal);
Line screenRay =
this.wwd.getView().computeRayFromScreenPoint(mousePoint.getX(), mousePoint.getY());
Line previousScreenRay =
this.wwd
.getView()
.computeRayFromScreenPoint(previousMousePoint.getX(), previousMousePoint.getY());
Vec4 pointOnLine = AirspaceEditorUtil.nearestPointOnLine(verticalRay, screenRay);
Vec4 previousPointOnLine =
AirspaceEditorUtil.nearestPointOnLine(verticalRay, previousScreenRay);
Position pos = this.wwd.getModel().getGlobe().computePositionFromPoint(pointOnLine);
Position previousPos =
this.wwd.getModel().getGlobe().computePositionFromPoint(previousPointOnLine);
double elevationChange = pos.getElevation() - previousPos.getElevation();
java.util.List<Position> boundary = new ArrayList<Position>();
for (LatLon ll : this.polygon.getOuterBoundary()) {
boundary.add(new Position(ll, ((Position) ll).getElevation() + elevationChange));
}
this.polygon.setOuterBoundary(boundary);
}
protected void moveControlPoint(
ControlPointMarker controlPoint, Point lastMousePoint, Point moveToPoint) {
View view = this.wwd.getView();
Globe globe = this.wwd.getModel().getGlobe();
Position refPos = controlPoint.getPosition();
if (refPos == null) return;
Line ray = view.computeRayFromScreenPoint(moveToPoint.getX(), moveToPoint.getY());
Line previousRay = view.computeRayFromScreenPoint(lastMousePoint.getX(), lastMousePoint.getY());
Vec4 vec = AirspaceEditorUtil.intersectGlobeAt(this.wwd, refPos.getElevation(), ray);
Vec4 previousVec =
AirspaceEditorUtil.intersectGlobeAt(this.wwd, refPos.getElevation(), previousRay);
if (vec == null || previousVec == null) {
return;
}
Position pos = globe.computePositionFromPoint(vec);
Position previousPos = globe.computePositionFromPoint(previousVec);
LatLon change = pos.subtract(previousPos);
java.util.List<LatLon> boundary = new ArrayList<LatLon>();
for (LatLon ll : this.polygon.getOuterBoundary()) {
boundary.add(ll);
}
boundary.set(controlPoint.getIndex(), new Position(pos.add(change), refPos.getAltitude()));
// ExtrudedPolygon ensures that the last boundary position is the same as the first. Remove the
// last point
// before setting the boundary.
boundary.remove(boundary.size() - 1);
this.polygon.setOuterBoundary(boundary);
}
/**
* Add a vertex to the polygon's outer boundary.
*
* @param mousePoint the point at which the mouse was clicked. The new vertex will be placed as
* near as possible to this point, at the elevation of the polygon.
*/
protected void addVertex(Point mousePoint) {
// Try to find the edge that is closest to a ray passing through the screen point. We're trying
// to determine
// the user's intent as to which edge a new two control points should be added to.
Line ray = this.wwd.getView().computeRayFromScreenPoint(mousePoint.getX(), mousePoint.getY());
Vec4 pickPoint = this.intersectPolygonAltitudeAt(ray);
double nearestDistance = Double.MAX_VALUE;
int newVertexIndex = 0;
// Loop through the control points and determine which edge is closest to the pick point
for (int i = 0; i < this.controlPoints.size(); i++) {
ControlPointMarker thisMarker = (ControlPointMarker) this.controlPoints.get(i);
ControlPointMarker nextMarker =
(ControlPointMarker) this.controlPoints.get((i + 1) % this.controlPoints.size());
Vec4 pointOnEdge =
AirspaceEditorUtil.nearestPointOnSegment(thisMarker.point, nextMarker.point, pickPoint);
if (!AirspaceEditorUtil.isPointBehindLineOrigin(ray, pointOnEdge)) {
double d = pointOnEdge.distanceTo3(pickPoint);
if (d < nearestDistance) {
newVertexIndex = i + 1;
nearestDistance = d;
}
}
}
Position newPosition = this.wwd.getModel().getGlobe().computePositionFromPoint(pickPoint);
// Copy the outer boundary list
ArrayList<Position> positionList = new ArrayList<Position>(this.controlPoints.size());
for (LatLon position : this.getPolygon().getOuterBoundary()) {
positionList.add((Position) position);
}
// Add the new vertex
positionList.add(newVertexIndex, newPosition);
this.getPolygon().setOuterBoundary(positionList);
}
protected void doMoveAirspaceVertically(
WorldWindow wwd, Airspace airspace, Point mousePoint, Point previousMousePoint) {
// Find the closest points between the rays through each screen point, and the ray from the
// control point
// and in the direction of the globe's surface normal. Compute the elevation difference between
// these two
// points, and use that as the change in airspace altitude.
//
// If the state keepControlPointsAboveTerrain is set, we prevent the control point from passing
// any lower than
// the terrain elevation beneath it.
if (!(airspace instanceof Movable)) {
return;
}
Movable movable = (Movable) airspace;
Position referencePos = movable.getReferencePosition();
if (referencePos == null) return;
Vec4 referencePoint = wwd.getModel().getGlobe().computePointFromPosition(referencePos);
Vec4 surfaceNormal =
wwd.getModel()
.getGlobe()
.computeSurfaceNormalAtLocation(
referencePos.getLatitude(), referencePos.getLongitude());
Line verticalRay = new Line(referencePoint, surfaceNormal);
Line screenRay =
wwd.getView()
.computeRayFromScreenPoint(previousMousePoint.getX(), previousMousePoint.getY());
Line previousScreenRay =
wwd.getView().computeRayFromScreenPoint(mousePoint.getX(), mousePoint.getY());
Vec4 pointOnLine = AirspaceEditorUtil.nearestPointOnLine(verticalRay, screenRay);
Vec4 previousPointOnLine =
AirspaceEditorUtil.nearestPointOnLine(verticalRay, previousScreenRay);
Position pos = wwd.getModel().getGlobe().computePositionFromPoint(pointOnLine);
Position previousPos = wwd.getModel().getGlobe().computePositionFromPoint(previousPointOnLine);
double elevationChange = previousPos.getElevation() - pos.getElevation();
double[] altitudes = this.getAirspace().getAltitudes();
boolean[] terrainConformance = this.getAirspace().isTerrainConforming();
if (this.isKeepControlPointsAboveTerrain()) {
if (terrainConformance[LOWER_ALTITUDE]) {
if (altitudes[LOWER_ALTITUDE] + elevationChange < 0.0)
elevationChange = 0.0 - altitudes[LOWER_ALTITUDE];
} else {
double height =
AirspaceEditorUtil.computeLowestHeightAboveSurface(
wwd, this.getCurrentControlPoints(), LOWER_ALTITUDE);
if (elevationChange <= -height) {
elevationChange = -height;
}
}
}
altitudes[LOWER_ALTITUDE] += elevationChange;
altitudes[UPPER_ALTITUDE] += elevationChange;
this.getAirspace().setAltitudes(altitudes[LOWER_ALTITUDE], altitudes[UPPER_ALTITUDE]);
this.fireAirspaceMoved(new AirspaceEditEvent(wwd, airspace, this));
}