/** {@inheritDoc} */
@Override()
public boolean passwordIsAcceptable(
ByteString newPassword,
Set<ByteString> currentPasswords,
Operation operation,
Entry userEntry,
MessageBuilder invalidReason) {
// Get a handle to the current configuration and see if we need to count
// the number of repeated characters in the password.
RepeatedCharactersPasswordValidatorCfg config = currentConfig;
int maxRepeats = config.getMaxConsecutiveLength();
if (maxRepeats <= 0) {
// We don't need to check anything, so the password will be acceptable.
return true;
}
// Get the password as a string. If we should use case-insensitive
// validation, then convert it to use all lowercase characters.
String passwordString = newPassword.toString();
if (!config.isCaseSensitiveValidation()) {
passwordString = passwordString.toLowerCase();
}
// Create variables to keep track of the last character we've seen and how
// many times we have seen it.
char lastCharacter = '\u0000';
int consecutiveCount = 0;
// Iterate through the characters in the password. If the consecutive
// count ever gets too high, then fail.
for (int i = 0; i < passwordString.length(); i++) {
char currentCharacter = passwordString.charAt(i);
if (currentCharacter == lastCharacter) {
consecutiveCount++;
if (consecutiveCount > maxRepeats) {
Message message = ERR_REPEATEDCHARS_VALIDATOR_TOO_MANY_CONSECUTIVE.get(maxRepeats);
invalidReason.append(message);
return false;
}
} else {
lastCharacter = currentCharacter;
consecutiveCount = 1;
}
}
return true;
}
private Object[] generateValues(String password) throws Exception {
ByteString bytePassword = ByteString.valueOf(password);
SaltedMD5PasswordStorageScheme scheme = new SaltedMD5PasswordStorageScheme();
ConfigEntry configEntry =
DirectoryServer.getConfigEntry(
DN.decode("cn=Salted MD5,cn=Password Storage Schemes,cn=config"));
SaltedMD5PasswordStorageSchemeCfg configuration =
AdminTestCaseUtils.getConfiguration(
SaltedMD5PasswordStorageSchemeCfgDefn.getInstance(), configEntry.getEntry());
scheme.initializePasswordStorageScheme(configuration);
ByteString encodedAuthPassword = scheme.encodePasswordWithScheme(bytePassword);
return new Object[] {encodedAuthPassword.toString(), password, true};
}
/**
* Perform the LDAP EXTENDED operation and send the result back to the client.
*
* @param objFactory The object factory for this operation.
* @param extendedRequest The extended request for this operation.
* @param controls Any required controls (e.g. for proxy authz).
* @return The result of the extended operation.
* @throws IOException If an I/O problem occurs.
* @throws LDAPException If an error occurs while interacting with an LDAP element.
* @throws ASN1Exception If an error occurs while interacting with an ASN.1 element.
*/
public ExtendedResponse doOperation(
ObjectFactory objFactory,
ExtendedRequest extendedRequest,
List<org.opends.server.types.Control> controls)
throws IOException, LDAPException, ASN1Exception {
ExtendedResponse extendedResponse = objFactory.createExtendedResponse();
extendedResponse.setRequestID(extendedRequest.getRequestID());
String requestName = extendedRequest.getRequestName();
Object value = extendedRequest.getRequestValue();
ByteString asnValue = ByteStringUtility.convertValue(value);
// Create and send the LDAP request to the server.
ProtocolOp op = new ExtendedRequestProtocolOp(requestName, asnValue);
LDAPMessage msg = new LDAPMessage(DSMLServlet.nextMessageID(), op, controls);
connection.getLDAPWriter().writeMessage(msg);
// Read and decode the LDAP response from the server.
LDAPMessage responseMessage = connection.getLDAPReader().readMessage();
ExtendedResponseProtocolOp extendedOp = responseMessage.getExtendedResponseProtocolOp();
int resultCode = extendedOp.getResultCode();
Message errorMessage = extendedOp.getErrorMessage();
// Set the result code and error message for the DSML response.
extendedResponse.setResponseName(extendedOp.getOID());
ByteString rawValue = extendedOp.getValue();
value = null;
if (rawValue != null) {
if (responseIsString(requestName)) {
value = rawValue.toString();
} else {
value = rawValue.toByteArray();
}
}
extendedResponse.setResponse(value);
extendedResponse.setErrorMessage(errorMessage != null ? errorMessage.toString() : null);
ResultCode code = ResultCodeFactory.create(objFactory, resultCode);
extendedResponse.setResultCode(code);
return extendedResponse;
}
/**
* Decodes the contents of the provided byte sequence as an ldap syntax definition according to
* the rules of this syntax. Note that the provided byte sequence value does not need to be
* normalized (and in fact, it should not be in order to allow the desired capitalization to be
* preserved).
*
* @param value The byte sequence containing the value to decode (it does not need to be
* normalized).
* @param schema The schema to use to resolve references to other schema elements.
* @param allowUnknownElements Indicates whether to allow values that are not defined in the
* server schema. This should only be true when called by {@code valueIsAcceptable}. Not used
* for LDAP Syntaxes
* @return The decoded ldapsyntax definition.
* @throws DirectoryException If the provided value cannot be decoded as an ldapsyntax definition.
*/
public static LDAPSyntaxDescription decodeLDAPSyntax(
ByteSequence value, Schema schema, boolean allowUnknownElements) throws DirectoryException {
// Get string representations of the provided value using the provided form.
String valueStr = value.toString();
// We'll do this a character at a time. First, skip over any leading
// whitespace.
int pos = 0;
int length = valueStr.length();
while ((pos < length) && (valueStr.charAt(pos) == ' ')) {
pos++;
}
if (pos >= length) {
// This means that the value was empty or contained only whitespace. That
// is illegal.
Message message = ERR_ATTR_SYNTAX_LDAPSYNTAX_EMPTY_VALUE.get();
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
// The next character must be an open parenthesis. If it is not, then that
// is an error.
char c = valueStr.charAt(pos++);
if (c != '(') {
Message message =
ERR_ATTR_SYNTAX_LDAPSYNTAX_EXPECTED_OPEN_PARENTHESIS.get(
valueStr, (pos - 1), String.valueOf(c));
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
// Skip over any spaces immediately following the opening parenthesis.
while ((pos < length) && ((c = valueStr.charAt(pos)) == ' ')) {
pos++;
}
if (pos >= length) {
// This means that the end of the value was reached before we could find
// the OID. Ths is illegal.
Message message = ERR_ATTR_SYNTAX_LDAPSYNTAX_TRUNCATED_VALUE.get(valueStr);
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
int oidStartPos = pos;
if (isDigit(c)) {
// This must be a numeric OID. In that case, we will accept only digits
// and periods, but not consecutive periods.
boolean lastWasPeriod = false;
while ((pos < length)
&& ((c = valueStr.charAt(pos)) != ' ')
&& (c = valueStr.charAt(pos)) != ')') {
if (c == '.') {
if (lastWasPeriod) {
Message message =
ERR_ATTR_SYNTAX_LDAPSYNTAX_DOUBLE_PERIOD_IN_NUMERIC_OID.get(valueStr, (pos - 1));
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
} else {
lastWasPeriod = true;
}
} else if (!isDigit(c)) {
// This must have been an illegal character.
Message message =
ERR_ATTR_SYNTAX_LDAPSYNTAX_ILLEGAL_CHAR_IN_NUMERIC_OID.get(
valueStr, String.valueOf(c), (pos - 1));
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
} else {
lastWasPeriod = false;
}
pos++;
}
} else {
// This must be a "fake" OID. In this case, we will only accept
// alphabetic characters, numeric digits, and the hyphen.
while ((pos < length)
&& ((c = valueStr.charAt(pos)) != ' ')
&& (c = valueStr.charAt(pos)) != ')') {
if (isAlpha(c)
|| isDigit(c)
|| (c == '-')
|| ((c == '_') && DirectoryServer.allowAttributeNameExceptions())) {
// This is fine. It is an acceptable character.
pos++;
} else {
// This must have been an illegal character.
Message message =
ERR_ATTR_SYNTAX_LDAPSYNTAX_ILLEGAL_CHAR_IN_STRING_OID.get(
valueStr, String.valueOf(c), (pos - 1));
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
}
}
// If we're at the end of the value, then it isn't a valid attribute type
// description. Otherwise, parse out the OID.
String oid;
if (pos >= length) {
Message message = ERR_ATTR_SYNTAX_LDAPSYNTAX_TRUNCATED_VALUE.get(valueStr);
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
} else {
oid = toLowerCase(valueStr.substring(oidStartPos, pos));
}
// Skip over the space(s) after the OID.
while ((pos < length) && ((c = valueStr.charAt(pos)) == ' ')) {
pos++;
}
if (pos >= length) {
// This means that the end of the value was reached before we could find
// the OID. Ths is illegal.
Message message = ERR_ATTR_SYNTAX_LDAPSYNTAX_TRUNCATED_VALUE.get(valueStr);
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
// At this point, we should have a pretty specific syntax that describes
// what may come next, but some of the components are optional and it would
// be pretty easy to put something in the wrong order, so we will be very
// flexible about what we can accept. Just look at the next token, figure
// out what it is and how to treat what comes after it, then repeat until
// we get to the end of the value. But before we start, set default values
// for everything else we might need to know.
String description = null;
LDAPSyntaxDescriptionSyntax syntax = null;
HashMap<String, List<String>> extraProperties = new LinkedHashMap<String, List<String>>();
boolean hasXSyntaxToken = false;
while (true) {
StringBuilder tokenNameBuffer = new StringBuilder();
pos = readTokenName(valueStr, tokenNameBuffer, pos);
String tokenName = tokenNameBuffer.toString();
String lowerTokenName = toLowerCase(tokenName);
if (tokenName.equals(")")) {
// We must be at the end of the value. If not, then that's a problem.
if (pos < length) {
Message message =
ERR_ATTR_SYNTAX_LDAPSYNTAX_UNEXPECTED_CLOSE_PARENTHESIS.get(valueStr, (pos - 1));
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
break;
} else if (lowerTokenName.equals("desc")) {
// This specifies the description for the attribute type. It is an
// arbitrary string of characters enclosed in single quotes.
StringBuilder descriptionBuffer = new StringBuilder();
pos = readQuotedString(valueStr, descriptionBuffer, pos);
description = descriptionBuffer.toString();
} else if (lowerTokenName.equals("x-subst")) {
if (hasXSyntaxToken) {
// We've already seen syntax extension. More than 1 is not allowed
Message message = ERR_ATTR_SYNTAX_LDAPSYNTAX_TOO_MANY_EXTENSIONS.get(valueStr);
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
hasXSyntaxToken = true;
StringBuilder woidBuffer = new StringBuilder();
pos = readQuotedString(valueStr, woidBuffer, pos);
String syntaxOID = toLowerCase(woidBuffer.toString());
AttributeSyntax<?> subSyntax = schema.getSyntax(syntaxOID);
if (subSyntax == null) {
Message message =
ERR_ATTR_SYNTAX_LDAPSYNTAX_UNKNOWN_SYNTAX.get(String.valueOf(oid), syntaxOID);
throw new DirectoryException(ResultCode.CONSTRAINT_VIOLATION, message);
}
syntax = new SubstitutionSyntax(subSyntax, valueStr, description, oid);
} else if (lowerTokenName.equals("x-pattern")) {
if (hasXSyntaxToken) {
// We've already seen syntax extension. More than 1 is not allowed
Message message = ERR_ATTR_SYNTAX_LDAPSYNTAX_TOO_MANY_EXTENSIONS.get(valueStr);
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
hasXSyntaxToken = true;
StringBuilder regexBuffer = new StringBuilder();
pos = readQuotedString(valueStr, regexBuffer, pos);
String regex = regexBuffer.toString().trim();
if (regex.length() == 0) {
Message message = WARN_ATTR_SYNTAX_LDAPSYNTAX_REGEX_NO_PATTERN.get(valueStr);
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
try {
Pattern pattern = Pattern.compile(regex);
syntax = new RegexSyntax(pattern, valueStr, description, oid);
} catch (Exception e) {
Message message = WARN_ATTR_SYNTAX_LDAPSYNTAX_REGEX_INVALID_PATTERN.get(valueStr, regex);
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
} else if (lowerTokenName.equals("x-enum")) {
if (hasXSyntaxToken) {
// We've already seen syntax extension. More than 1 is not allowed
Message message = ERR_ATTR_SYNTAX_LDAPSYNTAX_TOO_MANY_EXTENSIONS.get(valueStr);
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
hasXSyntaxToken = true;
LinkedList<String> values = new LinkedList<String>();
pos = readExtraParameterValues(valueStr, values, pos);
if (values.isEmpty()) {
Message message = ERR_ATTR_SYNTAX_LDAPSYNTAX_ENUM_NO_VALUES.get(valueStr);
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
// Parse all enum values, check for uniqueness
LinkedList<ByteSequence> entries = new LinkedList<ByteSequence>();
for (String v : values) {
ByteString entry = ByteString.valueOf(v);
if (entries.contains(entry)) {
Message message =
WARN_ATTR_SYNTAX_LDAPSYNTAX_ENUM_DUPLICATE_VALUE.get(
valueStr, entry.toString(), pos);
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
entries.add(entry);
}
syntax = new EnumSyntax(entries, valueStr, description, oid);
} else if (tokenName.matches("X\\-[_\\p{Alpha}-]+")) {
// This must be a non-standard property and it must be followed by
// either a single value in single quotes or an open parenthesis
// followed by one or more values in single quotes separated by spaces
// followed by a close parenthesis.
List<String> valueList = new ArrayList<String>();
pos = readExtraParameterValues(valueStr, valueList, pos);
extraProperties.put(tokenName, valueList);
} else {
// Unknown Token
Message message = ERR_ATTR_SYNTAX_LDAPSYNTAX_UNKNOWN_EXT.get(valueStr, tokenName, pos);
throw new DirectoryException(ResultCode.INVALID_ATTRIBUTE_SYNTAX, message);
}
}
if (syntax == null) {
// Create a plain Syntax. That seems to be required by export/import
// Schema backend.
syntax = new LDAPSyntaxDescriptionSyntax();
}
CommonSchemaElements.checkSafeProperties(extraProperties);
// Since we reached here it means everything is OK.
return new LDAPSyntaxDescription(
valueStr, syntax,
description, extraProperties);
}