/**
* Transforms an xml tree putting the result to a stream with optional parameters.
*
* @param xml
* @param styleSheetPath
* @param result
* @param params
* @throws Exception
*/
public static void transform(
Element xml, String styleSheetPath, Result result, Map<String, String> params)
throws Exception {
File styleSheet = new File(styleSheetPath);
Source srcXml = new JDOMSource(new Document((Element) xml.detach()));
Source srcSheet = new StreamSource(styleSheet);
// Dear old saxon likes to yell loudly about each and every XSLT 1.0
// stylesheet so switch it off but trap any exceptions because this
// code is run on transformers other than saxon
TransformerFactory transFact = TransformerFactoryFactory.getTransformerFactory();
transFact.setURIResolver(new JeevesURIResolver());
try {
transFact.setAttribute(FeatureKeys.VERSION_WARNING, false);
transFact.setAttribute(FeatureKeys.LINE_NUMBERING, true);
transFact.setAttribute(FeatureKeys.PRE_EVALUATE_DOC_FUNCTION, false);
transFact.setAttribute(FeatureKeys.RECOVERY_POLICY, Configuration.RECOVER_SILENTLY);
// Add the following to get timing info on xslt transformations
// transFact.setAttribute(FeatureKeys.TIMING,true);
} catch (IllegalArgumentException e) {
Log.warning(Log.ENGINE, "WARNING: transformerfactory doesnt like saxon attributes!");
// e.printStackTrace();
} finally {
Transformer t = transFact.newTransformer(srcSheet);
if (params != null) {
for (Map.Entry<String, String> param : params.entrySet()) {
t.setParameter(param.getKey(), param.getValue());
}
}
t.transform(srcXml, result);
}
}
/**
* Transform an xml tree to PDF using XSL-FOP * putting the result to a stream (uses a
* stylesheet on disk)
*/
public static String transformFOP(String uploadDir, Element xml, String styleSheetPath)
throws Exception {
String file = uploadDir + UUID.randomUUID().toString() + ".pdf";
// Step 1: Construct a FopFactory
// (reuse if you plan to render multiple documents!)
FopFactory fopFactory = FopFactory.newInstance();
// Step 2: Set up output stream.
// Note: Using BufferedOutputStream for performance reasons (helpful
// with FileOutputStreams).
OutputStream out = new BufferedOutputStream(new FileOutputStream(new File(file)));
try {
// Step 3: Construct fop with desired output format
Fop fop = fopFactory.newFop(MimeConstants.MIME_PDF, out);
// Step 4: Setup JAXP using identity transformer
TransformerFactory factory = TransformerFactoryFactory.getTransformerFactory();
factory.setURIResolver(new JeevesURIResolver());
Source xslt = new StreamSource(new File(styleSheetPath));
try {
factory.setAttribute(FeatureKeys.VERSION_WARNING, false);
factory.setAttribute(FeatureKeys.LINE_NUMBERING, true);
factory.setAttribute(FeatureKeys.RECOVERY_POLICY, Configuration.RECOVER_SILENTLY);
} catch (IllegalArgumentException e) {
Log.warning(Log.ENGINE, "WARNING: transformerfactory doesnt like saxon attributes!");
// e.printStackTrace();
} finally {
Transformer transformer = factory.newTransformer(xslt);
// Step 5: Setup input and output for XSLT transformation
// Setup input stream
Source src = new JDOMSource(new Document((Element) xml.detach()));
// Resulting SAX events (the generated FO) must be piped through to
// FOP
Result res = new SAXResult(fop.getDefaultHandler());
// Step 6: Start XSLT transformation and FOP processing
transformer.transform(src, res);
}
} finally {
// Clean-up
out.close();
}
return file;
}
public void write(Document doc, OutputStream outputStream) throws IOException {
// OutputFormat format = new OutputFormat(doc);
// format.setIndenting(true);
// format.setEncoding("UTF-8");
// XMLSerializer serializer = new XMLSerializer(outputStream, format);
// serializer.asDOMSerializer();
// serializer.serialize(doc);
try {
TransformerFactory factory = TransformerFactory.newInstance();
try {
factory.setAttribute("indent-number", 4);
} catch (Exception e) {; // guess we can't set it, that's ok
}
Transformer transformer = factory.newTransformer();
transformer.setOutputProperty(OutputKeys.METHOD, "xml");
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
transformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
// need to nest outputStreamWriter to get around JDK 5 bug. See
// http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6296446
transformer.transform(
new DOMSource(doc), new StreamResult(new OutputStreamWriter(outputStream, "utf-8")));
} catch (TransformerException e) {
throw new IOException(e.getMessage());
}
}
/**
* @param out
* @param document
* @param xsltStream
* @throws TransformerFactoryConfigurationError
* @throws TransformerException
*/
public static void parse(
OutputStream out,
Document document,
InputStream xsltStream,
URIResolver customResolver,
boolean pretty)
throws TransformerFactoryConfigurationError, TransformerException {
Source xsltSource = new StreamSource(xsltStream);
TransformerFactory transformerFactory = TransformerFactory.newInstance();
if (pretty) {
try {
transformerFactory.setAttribute("indent-number", new Integer(2));
} catch (Exception e) {
}
}
if (customResolver != null) {
transformerFactory.setURIResolver(customResolver);
}
Transformer transformer = transformerFactory.newTransformer(xsltSource);
if (pretty) {
try {
transformer.setOutputProperty("{http://xml.apache.org/xalan}indent-amount", "2");
} catch (Exception e) {
}
}
parse(out, document, transformer);
}
private void initTransformerFactory(TransformerFactory factory) {
String name = factory.getClass().getName();
try {
if (name.equals("com.icl.saxon.TransformerFactoryImpl"))
factory.setAttribute("http://icl.com/saxon/feature/linenumbering", Boolean.TRUE);
else if (name.equals("org.apache.xalan.processor.TransformerFactoryImpl")) {
// Try both the documented URI and the URI that the code expects.
try {
// This is the URI that the code expects.
factory.setAttribute(
"http://xml.apache.org/xalan/properties/source-location", Boolean.TRUE);
} catch (IllegalArgumentException e) {
// This is the URI that's documented.
factory.setAttribute("http://apache.org/xalan/features/source_location", Boolean.TRUE);
}
}
} catch (IllegalArgumentException e) {
}
}
static {
_docBuilderFactory = DocumentBuilderFactory.newInstance();
_docBuilderFactory.setNamespaceAware(true);
try {
_transformerFactory.setAttribute("indent-number", Integer.valueOf(4));
} catch (Exception e) {
// Ignore... Xalan may throw on this!!
// We handle Xalan indentation separately (see serialize method).
Logger.getLogger(AbstractDOMTransformer.class)
.debug("Failed to set indent on transformer.", e);
}
}
public String toString(SOAPMessage message, int indent)
throws IOException, SOAPException, TransformerException {
ByteArrayOutputStream baos = new ByteArrayOutputStream();
message.writeTo(baos);
TransformerFactory tf = TransformerFactory.newInstance();
tf.setAttribute("indent-number", indent);
Transformer transformer = tf.newTransformer();
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
StreamResult result = new StreamResult(new StringWriter());
StreamSource streamSource = new StreamSource(new ByteArrayInputStream(baos.toByteArray()));
transformer.transform(streamSource, result);
return result.getWriter().toString();
}
private boolean writeHostFile(Document doc, File spec) {
try {
final TransformerFactory tfac = TransformerFactory.newInstance();
tfac.setAttribute("indent-number", "3");
final Transformer t = tfac.newTransformer();
t.setOutputProperty(OutputKeys.INDENT, "yes");
t.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "no");
t.transform(new DOMSource(doc), new StreamResult(new BufferedWriter(new FileWriter(spec))));
return true;
} catch (final Exception e) {
setErrorMessage("Could not write file " + e.getMessage());
return false;
}
}
/**
* This method is used to format response xml
*
* @param input
* @param indent
* @return
*/
public static String prettyFormat(String input, int indent) {
try {
Source xmlInput = new StreamSource(new StringReader(input));
StringWriter stringWriter = new StringWriter();
StreamResult xmlOutput = new StreamResult(stringWriter);
TransformerFactory transformerFactory = TransformerFactory.newInstance();
transformerFactory.setAttribute("indent-number", indent);
Transformer transformer = transformerFactory.newTransformer();
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
transformer.transform(xmlInput, xmlOutput);
return xmlOutput.getWriter().toString();
} catch (Exception e) {
throw new RuntimeException(e);
}
}
public static boolean writeStaticHostFile(Document doc, File spec) {
try {
final TransformerFactory tfac = TransformerFactory.newInstance();
tfac.setAttribute("indent-number", "3");
final Transformer t = tfac.newTransformer();
t.setOutputProperty(OutputKeys.INDENT, "yes");
t.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "no");
t.transform(new DOMSource(doc), new StreamResult(new BufferedWriter(new FileWriter(spec))));
return true;
} catch (final TransformerException e) {
return false;
} catch (IOException e) {
return false;
}
}
public static String prettyPrint(String inString) {
try {
TransformerFactory factory = TransformerFactory.newInstance();
factory.setAttribute("indent-number", new Integer(4));
Transformer transformer = factory.newTransformer();
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
StreamResult result = new StreamResult(new StringWriter());
StreamSource source = new StreamSource(new StringReader(inString));
transformer.transform(source, result);
String xmlString = result.getWriter().toString();
return xmlString;
} catch (TransformerException ex) {
ex.printStackTrace();
}
return null;
}
public void save(String filename) {
try {
Document document = element.getOwnerDocument();
document.getDocumentElement().normalize();
TransformerFactory tFactory = TransformerFactory.newInstance();
tFactory.setAttribute("indent-number", new Integer(4));
Transformer transformer = tFactory.newTransformer();
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
DOMSource source = new DOMSource(document);
File file = new File(filename);
StreamResult result = new StreamResult(file);
transformer.transform(source, result);
} catch (Exception e) {
severe("Could not save XML file: " + e.getMessage());
}
}
private String formatXML(String str) {
try {
// Use a Transformer for output
TransformerFactory tFactory = TransformerFactory.newInstance();
// Surround this setting in a try/catch for compatibility with Java 1.4. This setting is
// required
// for Java 1.5
try {
tFactory.setAttribute("indent-number", 2);
} catch (IllegalArgumentException e) {
// Ignore
}
Transformer transformer = tFactory.newTransformer();
transformer.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "yes");
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "2");
// Transform the requested string into a nice formatted XML string
StreamSource source = new StreamSource(new StringReader(str));
StringWriter sw = new StringWriter();
StreamResult result = new StreamResult(sw);
transformer.transform(source, result);
return sw.toString();
} catch (TransformerConfigurationException tce) {
// Error generated by the parser
System.out.println("\n** Transformer Factory error");
System.out.println(" " + tce.getMessage());
// Use the contained exception, if any
Throwable x = tce;
if (tce.getException() != null) x = tce.getException();
x.printStackTrace();
} catch (TransformerException te) {
// Error generated by the parser
System.out.println("\n** Transformation error");
System.out.println(" " + te.getMessage());
// Use the contained exception, if any
Throwable x = te;
if (te.getException() != null) x = te.getException();
x.printStackTrace();
}
return str;
}
/**
* Returns a toString of indented XML file from doc.
*
* @param doc
* @param indent
* @return String XML file
*/
public static String documentToString(Node doc, boolean indent) {
StringWriter sw = new StringWriter();
try {
TransformerFactory tFactory = TransformerFactory.newInstance();
if (indent) {
tFactory.setAttribute("indent-number", 2);
}
Transformer transformer = tFactory.newTransformer();
transformer.setOutputProperty(OutputKeys.INDENT, indent ? "yes" : "no");
transformer.transform(new DOMSource(doc), new StreamResult(sw));
} catch (TransformerConfigurationException e) {
e.printStackTrace();
} catch (TransformerException e) {
e.printStackTrace();
} catch (TransformerFactoryConfigurationError e) {
e.printStackTrace();
}
return sw.toString();
}
public static void saveDocument(Document document, String path)
throws TransformerConfigurationException, TransformerFactoryConfigurationError,
TransformerFactoryConfigurationError, TransformerException, IOException {
StringWriter sw = new StringWriter();
StreamResult sr = new StreamResult(sw);
DOMSource dom = new DOMSource(document);
TransformerFactory transformerFactory = TransformerFactory.newInstance();
transformerFactory.setAttribute("indent-number", 4);
Transformer transformer = transformerFactory.newTransformer();
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
transformer.transform(dom, sr);
String string = sw.toString();
FileWriter fw = new FileWriter(new File(path));
fw.write(string);
fw.close();
}
public static String formatMetadata(String input, int indent) {
input = input.replace("> <", "><");
try {
Source xmlInput = new StreamSource(new StringReader(input));
StringWriter stringWriter = new StringWriter();
StreamResult xmlOutput = new StreamResult(stringWriter);
StringWriter sw = new StringWriter();
xmlOutput.setWriter(sw);
TransformerFactory transformerFactory = TransformerFactory.newInstance();
transformerFactory.setAttribute("indent-number", indent);
Transformer transformer = transformerFactory.newTransformer();
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
transformer.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "yes");
transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "" + indent);
transformer.transform(xmlInput, xmlOutput);
return xmlOutput.getWriter().toString();
} catch (IllegalArgumentException | TransformerException e) {
return input;
}
}
/**
* 格式化XML格式的字符串
*
* @see 格式化失败时返回的Map中,isPrettySuccess=no,prettyResultStr=堆栈信息
* @see 格式化成功时返回的Map中,isPrettySuccess=yes,prettyResultStr=格式化后的字符串
* @param xmlString 待格式化的XML字符串
* @return 返回的Map中有两个字符串的key-value,分别为isPrettySuccess和prettyResultStr
*/
public static Map<String, String> formatXMLString(String xmlString) {
Map<String, String> resultMap = new HashMap<String, String>();
TransformerFactory transformerFactory = TransformerFactory.newInstance();
transformerFactory.setAttribute("indent-number", new Integer(2));
StringWriter writer = new StringWriter();
Transformer transformer = null;
try {
transformer = transformerFactory.newTransformer();
transformer.setOutputProperty("{http://xml.apache.org/xalan}indent-amount", "2");
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
transformer.transform(
new StreamSource(new StringReader(xmlString)), new StreamResult(writer));
} catch (TransformerException e) {
resultMap.put("isPrettySuccess", "no");
resultMap.put("prettyResultStr", extractStackTrace(e));
return resultMap;
}
resultMap.put("isPrettySuccess", "yes");
resultMap.put("prettyResultStr", writer.toString());
return resultMap;
}
public static void generate(String directory) {
try {
PrintWriter writer =
new PrintWriter(new File(directory + File.separator + "radargun-1.1.xsd"));
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
Document doc = builder.newDocument();
doc.setXmlVersion("1.0");
doc.setXmlStandalone(true);
generate(doc);
TransformerFactory tf = TransformerFactory.newInstance();
tf.setAttribute("indent-number", 3);
Transformer trans = tf.newTransformer();
trans.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "yes");
trans.setOutputProperty(OutputKeys.INDENT, "yes");
StreamResult result = new StreamResult(writer);
DOMSource source = new DOMSource(doc);
trans.transform(source, result);
writer.flush();
} catch (FileNotFoundException e) {
e
.printStackTrace(); // To change body of catch statement use File | Settings | File
// Templates.
} catch (ParserConfigurationException e) {
e
.printStackTrace(); // To change body of catch statement use File | Settings | File
// Templates.
} catch (TransformerConfigurationException e) {
e
.printStackTrace(); // To change body of catch statement use File | Settings | File
// Templates.
} catch (TransformerException e) {
e
.printStackTrace(); // To change body of catch statement use File | Settings | File
// Templates.
}
}
/**
* Format this XML data as a String.
*
* @webref xml:method
* @brief Formats XML data as a String
* @param indent -1 for a single line (and no declaration), >= 0 for indents and newlines
* @return the content
* @see XML#toString()
*/
public String format(int indent) {
try {
// entities = doctype.getEntities()
boolean useIndentAmount = false;
TransformerFactory factory = TransformerFactory.newInstance();
if (indent != -1) {
try {
factory.setAttribute("indent-number", indent);
} catch (IllegalArgumentException e) {
useIndentAmount = true;
}
}
Transformer transformer = factory.newTransformer();
// Add the XML declaration at the top if this node is the root and we're
// not writing to a single line (indent = -1 means single line).
if (indent == -1 || parent == null) {
transformer.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "yes");
} else {
transformer.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "no");
}
// transformer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, "sample.dtd");
transformer.setOutputProperty(OutputKeys.METHOD, "xml");
// transformer.setOutputProperty(OutputKeys.CDATA_SECTION_ELEMENTS, "yes"); // huh?
// transformer.setOutputProperty(OutputKeys.DOCTYPE_PUBLIC,
// "-//W3C//DTD XHTML 1.0 Transitional//EN");
// transformer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM,
// "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd");
// For Android, because (at least 2.3.3) doesn't like indent-number
if (useIndentAmount) {
transformer.setOutputProperty(
"{http://xml.apache.org/xslt}indent-amount", String.valueOf(indent));
}
// transformer.setOutputProperty(OutputKeys.ENCODING,"ISO-8859-1");
// transformer.setOutputProperty(OutputKeys.ENCODING,"UTF8");
transformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
// transformer.setOutputProperty(OutputKeys.CDATA_SECTION_ELEMENTS
// Always indent, otherwise the XML declaration will just be jammed
// onto the first line with the XML code as well.
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
// Properties p = transformer.getOutputProperties();
// for (Object key : p.keySet()) {
// System.out.println(key + " -> " + p.get(key));
// }
// If you smell something, that's because this code stinks. No matter
// the settings of the Transformer object, if the XML document already
// has whitespace elements, it won't bother re-indenting/re-formatting.
// So instead, transform the data once into a single line string.
// If indent is -1, then we're done. Otherwise re-run and the settings
// of the factory will kick in. If you know a better way to do this,
// please contribute. I've wasted too much of my Sunday on it. But at
// least the Giants are getting blown out by the Falcons.
final String decl = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>";
final String sep = System.getProperty("line.separator");
StringWriter tempWriter = new StringWriter();
StreamResult tempResult = new StreamResult(tempWriter);
transformer.transform(new DOMSource(node), tempResult);
String[] tempLines = PApplet.split(tempWriter.toString(), sep);
// PApplet.println(tempLines);
if (tempLines[0].startsWith("<?xml")) {
// Remove XML declaration from the top before slamming into one line
int declEnd = tempLines[0].indexOf("?>") + 2;
// if (tempLines[0].length() == decl.length()) {
if (tempLines[0].length() == declEnd) {
// If it's all the XML declaration, remove it
// PApplet.println("removing first line");
tempLines = PApplet.subset(tempLines, 1);
} else {
// PApplet.println("removing part of first line");
// If the first node has been moved to this line, be more careful
// tempLines[0] = tempLines[0].substring(decl.length());
tempLines[0] = tempLines[0].substring(declEnd);
}
}
String singleLine = PApplet.join(PApplet.trim(tempLines), "");
if (indent == -1) {
return singleLine;
}
// Might just be whitespace, which won't be valid XML for parsing below.
// https://github.com/processing/processing/issues/1796
// Since indent is not -1, that means they want valid XML,
// so we'll give them the single line plus the decl... Lame? sure.
if (singleLine.trim().length() == 0) {
// You want whitespace? I've got your whitespace right here.
return decl + sep + singleLine;
}
// Since the indent is not -1, bring back the XML declaration
// transformer.setOutputProperty(OutputKeys.OMIT_XML_DECLARATION, "no");
StringWriter stringWriter = new StringWriter();
StreamResult xmlOutput = new StreamResult(stringWriter);
// DOMSource source = new DOMSource(node);
Source source = new StreamSource(new StringReader(singleLine));
transformer.transform(source, xmlOutput);
String outgoing = stringWriter.toString();
// Add the XML declaration to the top if it's not there already
if (outgoing.startsWith(decl)) {
int declen = decl.length();
int seplen = sep.length();
if (outgoing.length() > declen + seplen
&& !outgoing.substring(declen, declen + seplen).equals(sep)) {
// make sure there's a line break between the XML decl and the code
return outgoing.substring(0, decl.length()) + sep + outgoing.substring(decl.length());
}
return outgoing;
} else {
return decl + sep + outgoing;
}
} catch (Exception e) {
e.printStackTrace();
}
return null;
}
// J2SE does not support Xalan interpretive
// main -> _main
public static void _main(String argv[]) {
// Runtime.getRuntime().traceMethodCalls(false); // turns Java tracing off
boolean doStackDumpOnError = false;
boolean setQuietMode = false;
boolean doDiag = false;
String msg = null;
boolean isSecureProcessing = false;
// Runtime.getRuntime().traceMethodCalls(false);
// Runtime.getRuntime().traceInstructions(false);
/** The default diagnostic writer... */
java.io.PrintWriter diagnosticsWriter = new PrintWriter(System.err, true);
java.io.PrintWriter dumpWriter = diagnosticsWriter;
ResourceBundle resbundle =
(SecuritySupport.getResourceBundle(
com.sun.org.apache.xml.internal.utils.res.XResourceBundle.ERROR_RESOURCES));
String flavor = "s2s";
if (argv.length < 1) {
printArgOptions(resbundle);
} else {
// J2SE does not support Xalan interpretive
// false -> true
boolean useXSLTC = true;
for (int i = 0; i < argv.length; i++) {
if ("-XSLTC".equalsIgnoreCase(argv[i])) {
useXSLTC = true;
}
}
TransformerFactory tfactory;
if (useXSLTC) {
String key = "javax.xml.transform.TransformerFactory";
String value = "com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl";
Properties props = System.getProperties();
props.put(key, value);
System.setProperties(props);
}
try {
tfactory = TransformerFactory.newInstance();
tfactory.setErrorListener(new DefaultErrorHandler());
} catch (TransformerFactoryConfigurationError pfe) {
pfe.printStackTrace(dumpWriter);
// "XSL Process was not successful.");
msg = XSLMessages.createMessage(XSLTErrorResources.ER_NOT_SUCCESSFUL, null);
diagnosticsWriter.println(msg);
tfactory = null; // shut up compiler
doExit(msg);
}
boolean formatOutput = false;
boolean useSourceLocation = false;
String inFileName = null;
String outFileName = null;
String dumpFileName = null;
String xslFileName = null;
String treedumpFileName = null;
// J2SE does not support Xalan interpretive
/*
PrintTraceListener tracer = null;
*/
String outputType = null;
String media = null;
Vector params = new Vector();
boolean quietConflictWarnings = false;
URIResolver uriResolver = null;
EntityResolver entityResolver = null;
ContentHandler contentHandler = null;
int recursionLimit = -1;
for (int i = 0; i < argv.length; i++) {
if ("-XSLTC".equalsIgnoreCase(argv[i])) {
// The -XSLTC option has been processed.
}
// J2SE does not support Xalan interpretive
/*
else if ("-TT".equalsIgnoreCase(argv[i]))
{
if (!useXSLTC)
{
if (null == tracer)
tracer = new PrintTraceListener(diagnosticsWriter);
tracer.m_traceTemplates = true;
}
else
printInvalidXSLTCOption("-TT");
// tfactory.setTraceTemplates(true);
}
else if ("-TG".equalsIgnoreCase(argv[i]))
{
if (!useXSLTC)
{
if (null == tracer)
tracer = new PrintTraceListener(diagnosticsWriter);
tracer.m_traceGeneration = true;
}
else
printInvalidXSLTCOption("-TG");
// tfactory.setTraceSelect(true);
}
else if ("-TS".equalsIgnoreCase(argv[i]))
{
if (!useXSLTC)
{
if (null == tracer)
tracer = new PrintTraceListener(diagnosticsWriter);
tracer.m_traceSelection = true;
}
else
printInvalidXSLTCOption("-TS");
// tfactory.setTraceTemplates(true);
}
else if ("-TTC".equalsIgnoreCase(argv[i]))
{
if (!useXSLTC)
{
if (null == tracer)
tracer = new PrintTraceListener(diagnosticsWriter);
tracer.m_traceElements = true;
}
else
printInvalidXSLTCOption("-TTC");
// tfactory.setTraceTemplateChildren(true);
}
*/
else if ("-INDENT".equalsIgnoreCase(argv[i])) {
int indentAmount;
if (((i + 1) < argv.length) && (argv[i + 1].charAt(0) != '-')) {
indentAmount = Integer.parseInt(argv[++i]);
} else {
indentAmount = 0;
}
// TBD:
// xmlProcessorLiaison.setIndent(indentAmount);
} else if ("-IN".equalsIgnoreCase(argv[i])) {
if (i + 1 < argv.length && argv[i + 1].charAt(0) != '-') inFileName = argv[++i];
else
System.err.println(
XSLMessages.createMessage(
XSLTErrorResources.ER_MISSING_ARG_FOR_OPTION,
new Object[] {"-IN"})); // "Missing argument for);
} else if ("-MEDIA".equalsIgnoreCase(argv[i])) {
if (i + 1 < argv.length) media = argv[++i];
else
System.err.println(
XSLMessages.createMessage(
XSLTErrorResources.ER_MISSING_ARG_FOR_OPTION,
new Object[] {"-MEDIA"})); // "Missing argument for);
} else if ("-OUT".equalsIgnoreCase(argv[i])) {
if (i + 1 < argv.length && argv[i + 1].charAt(0) != '-') outFileName = argv[++i];
else
System.err.println(
XSLMessages.createMessage(
XSLTErrorResources.ER_MISSING_ARG_FOR_OPTION,
new Object[] {"-OUT"})); // "Missing argument for);
} else if ("-XSL".equalsIgnoreCase(argv[i])) {
if (i + 1 < argv.length && argv[i + 1].charAt(0) != '-') xslFileName = argv[++i];
else
System.err.println(
XSLMessages.createMessage(
XSLTErrorResources.ER_MISSING_ARG_FOR_OPTION,
new Object[] {"-XSL"})); // "Missing argument for);
} else if ("-FLAVOR".equalsIgnoreCase(argv[i])) {
if (i + 1 < argv.length) {
flavor = argv[++i];
} else
System.err.println(
XSLMessages.createMessage(
XSLTErrorResources.ER_MISSING_ARG_FOR_OPTION,
new Object[] {"-FLAVOR"})); // "Missing argument for);
} else if ("-PARAM".equalsIgnoreCase(argv[i])) {
if (i + 2 < argv.length) {
String name = argv[++i];
params.addElement(name);
String expression = argv[++i];
params.addElement(expression);
} else
System.err.println(
XSLMessages.createMessage(
XSLTErrorResources.ER_MISSING_ARG_FOR_OPTION,
new Object[] {"-PARAM"})); // "Missing argument for);
} else if ("-E".equalsIgnoreCase(argv[i])) {
// TBD:
// xmlProcessorLiaison.setShouldExpandEntityRefs(false);
} else if ("-V".equalsIgnoreCase(argv[i])) {
diagnosticsWriter.println(
resbundle.getString("version") // ">>>>>>> Xalan Version "
+ Version.getVersion()
+ ", "
+
/* xmlProcessorLiaison.getParserDescription()+ */
resbundle.getString("version2")); // "<<<<<<<");
}
// J2SE does not support Xalan interpretive
/*
else if ("-QC".equalsIgnoreCase(argv[i]))
{
if (!useXSLTC)
quietConflictWarnings = true;
else
printInvalidXSLTCOption("-QC");
}
*/
else if ("-Q".equalsIgnoreCase(argv[i])) {
setQuietMode = true;
} else if ("-DIAG".equalsIgnoreCase(argv[i])) {
doDiag = true;
} else if ("-XML".equalsIgnoreCase(argv[i])) {
outputType = "xml";
} else if ("-TEXT".equalsIgnoreCase(argv[i])) {
outputType = "text";
} else if ("-HTML".equalsIgnoreCase(argv[i])) {
outputType = "html";
} else if ("-EDUMP".equalsIgnoreCase(argv[i])) {
doStackDumpOnError = true;
if (((i + 1) < argv.length) && (argv[i + 1].charAt(0) != '-')) {
dumpFileName = argv[++i];
}
} else if ("-URIRESOLVER".equalsIgnoreCase(argv[i])) {
if (i + 1 < argv.length) {
try {
uriResolver = (URIResolver) ObjectFactory.newInstance(argv[++i], true);
tfactory.setURIResolver(uriResolver);
} catch (ConfigurationError cnfe) {
msg =
XSLMessages.createMessage(
XSLTErrorResources.ER_CLASS_NOT_FOUND_FOR_OPTION,
new Object[] {"-URIResolver"});
System.err.println(msg);
doExit(msg);
}
} else {
msg =
XSLMessages.createMessage(
XSLTErrorResources.ER_MISSING_ARG_FOR_OPTION,
new Object[] {"-URIResolver"}); // "Missing argument for);
System.err.println(msg);
doExit(msg);
}
} else if ("-ENTITYRESOLVER".equalsIgnoreCase(argv[i])) {
if (i + 1 < argv.length) {
try {
entityResolver = (EntityResolver) ObjectFactory.newInstance(argv[++i], true);
} catch (ConfigurationError cnfe) {
msg =
XSLMessages.createMessage(
XSLTErrorResources.ER_CLASS_NOT_FOUND_FOR_OPTION,
new Object[] {"-EntityResolver"});
System.err.println(msg);
doExit(msg);
}
} else {
// "Missing argument for);
msg =
XSLMessages.createMessage(
XSLTErrorResources.ER_MISSING_ARG_FOR_OPTION, new Object[] {"-EntityResolver"});
System.err.println(msg);
doExit(msg);
}
} else if ("-CONTENTHANDLER".equalsIgnoreCase(argv[i])) {
if (i + 1 < argv.length) {
try {
contentHandler = (ContentHandler) ObjectFactory.newInstance(argv[++i], true);
} catch (ConfigurationError cnfe) {
msg =
XSLMessages.createMessage(
XSLTErrorResources.ER_CLASS_NOT_FOUND_FOR_OPTION,
new Object[] {"-ContentHandler"});
System.err.println(msg);
doExit(msg);
}
} else {
// "Missing argument for);
msg =
XSLMessages.createMessage(
XSLTErrorResources.ER_MISSING_ARG_FOR_OPTION, new Object[] {"-ContentHandler"});
System.err.println(msg);
doExit(msg);
}
}
// J2SE does not support Xalan interpretive
/*
else if ("-L".equalsIgnoreCase(argv[i]))
{
if (!useXSLTC)
tfactory.setAttribute(XalanProperties.SOURCE_LOCATION, Boolean.TRUE);
else
printInvalidXSLTCOption("-L");
}
else if ("-INCREMENTAL".equalsIgnoreCase(argv[i]))
{
if (!useXSLTC)
tfactory.setAttribute
("http://xml.apache.org/xalan/features/incremental",
java.lang.Boolean.TRUE);
else
printInvalidXSLTCOption("-INCREMENTAL");
}
else if ("-NOOPTIMIZE".equalsIgnoreCase(argv[i]))
{
// Default is true.
//
// %REVIEW% We should have a generalized syntax for negative
// switches... and probably should accept the inverse even
// if it is the default.
if (!useXSLTC)
tfactory.setAttribute
("http://xml.apache.org/xalan/features/optimize",
java.lang.Boolean.FALSE);
else
printInvalidXSLTCOption("-NOOPTIMIZE");
}
else if ("-RL".equalsIgnoreCase(argv[i]))
{
if (!useXSLTC)
{
if (i + 1 < argv.length)
recursionLimit = Integer.parseInt(argv[++i]);
else
System.err.println(
XSLMessages.createMessage(
XSLTErrorResources.ER_MISSING_ARG_FOR_OPTION,
new Object[]{ "-rl" })); //"Missing argument for);
}
else
{
if (i + 1 < argv.length && argv[i + 1].charAt(0) != '-')
i++;
printInvalidXSLTCOption("-RL");
}
}
*/
// Generate the translet class and optionally specify the name
// of the translet class.
else if ("-XO".equalsIgnoreCase(argv[i])) {
if (useXSLTC) {
if (i + 1 < argv.length && argv[i + 1].charAt(0) != '-') {
tfactory.setAttribute("generate-translet", "true");
tfactory.setAttribute("translet-name", argv[++i]);
} else tfactory.setAttribute("generate-translet", "true");
} else {
if (i + 1 < argv.length && argv[i + 1].charAt(0) != '-') i++;
printInvalidXalanOption("-XO");
}
}
// Specify the destination directory for the translet classes.
else if ("-XD".equalsIgnoreCase(argv[i])) {
if (useXSLTC) {
if (i + 1 < argv.length && argv[i + 1].charAt(0) != '-')
tfactory.setAttribute("destination-directory", argv[++i]);
else
System.err.println(
XSLMessages.createMessage(
XSLTErrorResources.ER_MISSING_ARG_FOR_OPTION,
new Object[] {"-XD"})); // "Missing argument for);
} else {
if (i + 1 < argv.length && argv[i + 1].charAt(0) != '-') i++;
printInvalidXalanOption("-XD");
}
}
// Specify the jar file name which the translet classes are packaged into.
else if ("-XJ".equalsIgnoreCase(argv[i])) {
if (useXSLTC) {
if (i + 1 < argv.length && argv[i + 1].charAt(0) != '-') {
tfactory.setAttribute("generate-translet", "true");
tfactory.setAttribute("jar-name", argv[++i]);
} else
System.err.println(
XSLMessages.createMessage(
XSLTErrorResources.ER_MISSING_ARG_FOR_OPTION,
new Object[] {"-XJ"})); // "Missing argument for);
} else {
if (i + 1 < argv.length && argv[i + 1].charAt(0) != '-') i++;
printInvalidXalanOption("-XJ");
}
}
// Specify the package name prefix for the generated translet classes.
else if ("-XP".equalsIgnoreCase(argv[i])) {
if (useXSLTC) {
if (i + 1 < argv.length && argv[i + 1].charAt(0) != '-')
tfactory.setAttribute("package-name", argv[++i]);
else
System.err.println(
XSLMessages.createMessage(
XSLTErrorResources.ER_MISSING_ARG_FOR_OPTION,
new Object[] {"-XP"})); // "Missing argument for);
} else {
if (i + 1 < argv.length && argv[i + 1].charAt(0) != '-') i++;
printInvalidXalanOption("-XP");
}
}
// Enable template inlining.
else if ("-XN".equalsIgnoreCase(argv[i])) {
if (useXSLTC) {
tfactory.setAttribute("enable-inlining", "true");
} else printInvalidXalanOption("-XN");
}
// Turns on additional debugging message output
else if ("-XX".equalsIgnoreCase(argv[i])) {
if (useXSLTC) {
tfactory.setAttribute("debug", "true");
} else printInvalidXalanOption("-XX");
}
// Create the Transformer from the translet if the translet class is newer
// than the stylesheet.
else if ("-XT".equalsIgnoreCase(argv[i])) {
if (useXSLTC) {
tfactory.setAttribute("auto-translet", "true");
} else printInvalidXalanOption("-XT");
} else if ("-SECURE".equalsIgnoreCase(argv[i])) {
isSecureProcessing = true;
try {
tfactory.setFeature(XMLConstants.FEATURE_SECURE_PROCESSING, true);
} catch (TransformerConfigurationException e) {
}
} else
System.err.println(
XSLMessages.createMessage(
XSLTErrorResources.ER_INVALID_OPTION,
new Object[] {argv[i]})); // "Invalid argument:);
}
// Print usage instructions if no xml and xsl file is specified in the command line
if (inFileName == null && xslFileName == null) {
msg = resbundle.getString("xslProc_no_input");
System.err.println(msg);
doExit(msg);
}
// Note that there are usage cases for calling us without a -IN arg
// The main XSL transformation occurs here!
try {
long start = System.currentTimeMillis();
if (null != dumpFileName) {
dumpWriter = new PrintWriter(new FileWriter(dumpFileName));
}
Templates stylesheet = null;
if (null != xslFileName) {
if (flavor.equals("d2d")) {
// Parse in the xml data into a DOM
DocumentBuilderFactory dfactory = DocumentBuilderFactory.newInstance();
dfactory.setNamespaceAware(true);
if (isSecureProcessing) {
try {
dfactory.setFeature(XMLConstants.FEATURE_SECURE_PROCESSING, true);
} catch (ParserConfigurationException pce) {
}
}
DocumentBuilder docBuilder = dfactory.newDocumentBuilder();
Node xslDOM = docBuilder.parse(new InputSource(xslFileName));
stylesheet = tfactory.newTemplates(new DOMSource(xslDOM, xslFileName));
} else {
// System.out.println("Calling newTemplates: "+xslFileName);
stylesheet = tfactory.newTemplates(new StreamSource(xslFileName));
// System.out.println("Done calling newTemplates: "+xslFileName);
}
}
PrintWriter resultWriter;
StreamResult strResult;
if (null != outFileName) {
strResult = new StreamResult(new FileOutputStream(outFileName));
// One possible improvement might be to ensure this is
// a valid URI before setting the systemId, but that
// might have subtle changes that pre-existing users
// might notice; we can think about that later -sc r1.46
strResult.setSystemId(outFileName);
} else {
strResult = new StreamResult(System.out);
// We used to default to incremental mode in this case.
// We've since decided that since the -INCREMENTAL switch is
// available, that default is probably not necessary nor
// necessarily a good idea.
}
SAXTransformerFactory stf = (SAXTransformerFactory) tfactory;
// J2SE does not support Xalan interpretive
/*
// This is currently controlled via TransformerFactoryImpl.
if (!useXSLTC && useSourceLocation)
stf.setAttribute(XalanProperties.SOURCE_LOCATION, Boolean.TRUE);
*/
// Did they pass in a stylesheet, or should we get it from the
// document?
if (null == stylesheet) {
Source source =
stf.getAssociatedStylesheet(new StreamSource(inFileName), media, null, null);
if (null != source) stylesheet = tfactory.newTemplates(source);
else {
if (null != media)
throw new TransformerException(
XSLMessages.createMessage(
XSLTErrorResources.ER_NO_STYLESHEET_IN_MEDIA,
new Object[] {inFileName, media})); // "No stylesheet found in: "
// + inFileName + ", media="
// + media);
else
throw new TransformerException(
XSLMessages.createMessage(
XSLTErrorResources.ER_NO_STYLESHEET_PI,
new Object[] {inFileName})); // "No xml-stylesheet PI found in: "
// + inFileName);
}
}
if (null != stylesheet) {
Transformer transformer = flavor.equals("th") ? null : stylesheet.newTransformer();
transformer.setErrorListener(new DefaultErrorHandler());
// Override the output format?
if (null != outputType) {
transformer.setOutputProperty(OutputKeys.METHOD, outputType);
}
// J2SE does not support Xalan interpretive
/*
if (transformer instanceof com.sun.org.apache.xalan.internal.transformer.TransformerImpl)
{
com.sun.org.apache.xalan.internal.transformer.TransformerImpl impl = (com.sun.org.apache.xalan.internal.transformer.TransformerImpl)transformer;
TraceManager tm = impl.getTraceManager();
if (null != tracer)
tm.addTraceListener(tracer);
impl.setQuietConflictWarnings(quietConflictWarnings);
// This is currently controlled via TransformerFactoryImpl.
if (useSourceLocation)
impl.setProperty(XalanProperties.SOURCE_LOCATION, Boolean.TRUE);
if(recursionLimit>0)
impl.setRecursionLimit(recursionLimit);
// sc 28-Feb-01 if we re-implement this, please uncomment helpmsg in printArgOptions
// impl.setDiagnosticsOutput( setQuietMode ? null : diagnosticsWriter );
}
*/
int nParams = params.size();
for (int i = 0; i < nParams; i += 2) {
transformer.setParameter(
(String) params.elementAt(i), (String) params.elementAt(i + 1));
}
if (uriResolver != null) transformer.setURIResolver(uriResolver);
if (null != inFileName) {
if (flavor.equals("d2d")) {
// Parse in the xml data into a DOM
DocumentBuilderFactory dfactory = DocumentBuilderFactory.newInstance();
dfactory.setCoalescing(true);
dfactory.setNamespaceAware(true);
if (isSecureProcessing) {
try {
dfactory.setFeature(XMLConstants.FEATURE_SECURE_PROCESSING, true);
} catch (ParserConfigurationException pce) {
}
}
DocumentBuilder docBuilder = dfactory.newDocumentBuilder();
if (entityResolver != null) docBuilder.setEntityResolver(entityResolver);
Node xmlDoc = docBuilder.parse(new InputSource(inFileName));
Document doc = docBuilder.newDocument();
org.w3c.dom.DocumentFragment outNode = doc.createDocumentFragment();
transformer.transform(new DOMSource(xmlDoc, inFileName), new DOMResult(outNode));
// Now serialize output to disk with identity transformer
Transformer serializer = stf.newTransformer();
serializer.setErrorListener(new DefaultErrorHandler());
Properties serializationProps = stylesheet.getOutputProperties();
serializer.setOutputProperties(serializationProps);
if (contentHandler != null) {
SAXResult result = new SAXResult(contentHandler);
serializer.transform(new DOMSource(outNode), result);
} else serializer.transform(new DOMSource(outNode), strResult);
} else if (flavor.equals("th")) {
for (int i = 0; i < 1; i++) // Loop for diagnosing bugs with inconsistent behavior
{
// System.out.println("Testing the TransformerHandler...");
XMLReader reader = null;
// Use JAXP1.1 ( if possible )
try {
javax.xml.parsers.SAXParserFactory factory =
javax.xml.parsers.SAXParserFactory.newInstance();
factory.setNamespaceAware(true);
if (isSecureProcessing) {
try {
factory.setFeature(XMLConstants.FEATURE_SECURE_PROCESSING, true);
} catch (org.xml.sax.SAXException se) {
}
}
javax.xml.parsers.SAXParser jaxpParser = factory.newSAXParser();
reader = jaxpParser.getXMLReader();
} catch (javax.xml.parsers.ParserConfigurationException ex) {
throw new org.xml.sax.SAXException(ex);
} catch (javax.xml.parsers.FactoryConfigurationError ex1) {
throw new org.xml.sax.SAXException(ex1.toString());
} catch (NoSuchMethodError ex2) {
} catch (AbstractMethodError ame) {
}
if (null == reader) {
reader = XMLReaderFactory.createXMLReader();
}
// J2SE does not support Xalan interpretive
/*
if (!useXSLTC)
stf.setAttribute(com.sun.org.apache.xalan.internal.processor.TransformerFactoryImpl.FEATURE_INCREMENTAL,
Boolean.TRUE);
*/
TransformerHandler th = stf.newTransformerHandler(stylesheet);
reader.setContentHandler(th);
reader.setDTDHandler(th);
if (th instanceof org.xml.sax.ErrorHandler)
reader.setErrorHandler((org.xml.sax.ErrorHandler) th);
try {
reader.setProperty("http://xml.org/sax/properties/lexical-handler", th);
} catch (org.xml.sax.SAXNotRecognizedException e) {
} catch (org.xml.sax.SAXNotSupportedException e) {
}
try {
reader.setFeature("http://xml.org/sax/features/namespace-prefixes", true);
} catch (org.xml.sax.SAXException se) {
}
th.setResult(strResult);
reader.parse(new InputSource(inFileName));
}
} else {
if (entityResolver != null) {
XMLReader reader = null;
// Use JAXP1.1 ( if possible )
try {
javax.xml.parsers.SAXParserFactory factory =
javax.xml.parsers.SAXParserFactory.newInstance();
factory.setNamespaceAware(true);
if (isSecureProcessing) {
try {
factory.setFeature(XMLConstants.FEATURE_SECURE_PROCESSING, true);
} catch (org.xml.sax.SAXException se) {
}
}
javax.xml.parsers.SAXParser jaxpParser = factory.newSAXParser();
reader = jaxpParser.getXMLReader();
} catch (javax.xml.parsers.ParserConfigurationException ex) {
throw new org.xml.sax.SAXException(ex);
} catch (javax.xml.parsers.FactoryConfigurationError ex1) {
throw new org.xml.sax.SAXException(ex1.toString());
} catch (NoSuchMethodError ex2) {
} catch (AbstractMethodError ame) {
}
if (null == reader) {
reader = XMLReaderFactory.createXMLReader();
}
reader.setEntityResolver(entityResolver);
if (contentHandler != null) {
SAXResult result = new SAXResult(contentHandler);
transformer.transform(new SAXSource(reader, new InputSource(inFileName)), result);
} else {
transformer.transform(
new SAXSource(reader, new InputSource(inFileName)), strResult);
}
} else if (contentHandler != null) {
SAXResult result = new SAXResult(contentHandler);
transformer.transform(new StreamSource(inFileName), result);
} else {
// System.out.println("Starting transform");
transformer.transform(new StreamSource(inFileName), strResult);
// System.out.println("Done with transform");
}
}
} else {
StringReader reader = new StringReader("<?xml version=\"1.0\"?> <doc/>");
transformer.transform(new StreamSource(reader), strResult);
}
} else {
// "XSL Process was not successful.");
msg = XSLMessages.createMessage(XSLTErrorResources.ER_NOT_SUCCESSFUL, null);
diagnosticsWriter.println(msg);
doExit(msg);
}
// close output streams
if (null != outFileName && strResult != null) {
java.io.OutputStream out = strResult.getOutputStream();
java.io.Writer writer = strResult.getWriter();
try {
if (out != null) out.close();
if (writer != null) writer.close();
} catch (java.io.IOException ie) {
}
}
long stop = System.currentTimeMillis();
long millisecondsDuration = stop - start;
if (doDiag) {
Object[] msgArgs = new Object[] {inFileName, xslFileName, new Long(millisecondsDuration)};
msg = XSLMessages.createMessage("diagTiming", msgArgs);
diagnosticsWriter.println('\n');
diagnosticsWriter.println(msg);
}
} catch (Throwable throwable) {
while (throwable instanceof com.sun.org.apache.xml.internal.utils.WrappedRuntimeException) {
throwable =
((com.sun.org.apache.xml.internal.utils.WrappedRuntimeException) throwable)
.getException();
}
if ((throwable instanceof NullPointerException)
|| (throwable instanceof ClassCastException)) doStackDumpOnError = true;
diagnosticsWriter.println();
if (doStackDumpOnError) throwable.printStackTrace(dumpWriter);
else {
DefaultErrorHandler.printLocation(diagnosticsWriter, throwable);
diagnosticsWriter.println(
XSLMessages.createMessage(XSLTErrorResources.ER_XSLT_ERROR, null)
+ " ("
+ throwable.getClass().getName()
+ "): "
+ throwable.getMessage());
}
// diagnosticsWriter.println(XSLMessages.createMessage(XSLTErrorResources.ER_NOT_SUCCESSFUL,
// null)); //"XSL Process was not successful.");
if (null != dumpFileName) {
dumpWriter.close();
}
doExit(throwable.getMessage());
}
if (null != dumpFileName) {
dumpWriter.close();
}
if (null != diagnosticsWriter) {
// diagnosticsWriter.close();
}
// if(!setQuietMode)
// diagnosticsWriter.println(resbundle.getString("xsldone")); //"Xalan: done");
// else
// diagnosticsWriter.println(""); //"Xalan: done");
}
}