/** Assumes that the component innards, max position, etc. are up-to-date. */
  private Rectangle getGenericBox(Rectangle r) {
    if (r == null) {
      r = new Rectangle();
    }

    if (progressBar.getOrientation() == JProgressBar.HORIZONTAL) {
      r.width = getBoxLength(componentInnards.width, componentInnards.height);
      if (r.width < 0) {
        r = null;
      } else {
        r.height = componentInnards.height;
        r.y = componentInnards.y;
      }
      // end of HORIZONTAL

    } else { // VERTICAL progress bar
      r.height = getBoxLength(componentInnards.height, componentInnards.width);
      if (r.height < 0) {
        r = null;
      } else {
        r.width = componentInnards.width;
        r.x = componentInnards.x;
      }
    } // end of VERTICAL

    return r;
  }
  public TaskbarPositionTest() {
    super("Use CTRL-down to show a JPopupMenu");
    setContentPane(panel = createContentPane());
    setJMenuBar(createMenuBar("1 - First Menu", true));
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);

    // CTRL-down will show the popup.
    panel
        .getInputMap()
        .put(KeyStroke.getKeyStroke(KeyEvent.VK_DOWN, InputEvent.CTRL_MASK), "OPEN_POPUP");
    panel.getActionMap().put("OPEN_POPUP", new PopupHandler());

    pack();

    Toolkit toolkit = Toolkit.getDefaultToolkit();
    fullScreenBounds = new Rectangle(new Point(), toolkit.getScreenSize());
    screenBounds = new Rectangle(new Point(), toolkit.getScreenSize());

    // Place the frame near the bottom. This is a pretty wild guess.
    this.setLocation(0, (int) screenBounds.getHeight() - 2 * this.getHeight());

    // Reduce the screen bounds by the insets.
    GraphicsConfiguration gc = this.getGraphicsConfiguration();
    if (gc != null) {
      Insets screenInsets = toolkit.getScreenInsets(gc);
      screenBounds = gc.getBounds();
      screenBounds.width -= (screenInsets.left + screenInsets.right);
      screenBounds.height -= (screenInsets.top + screenInsets.bottom);
      screenBounds.x += screenInsets.left;
      screenBounds.y += screenInsets.top;
    }

    setVisible(true);
  }
  /**
   * Paints the word-wrapped text.
   *
   * @param g The graphics context in which to paint.
   * @param a The shape (usually a rectangle) in which to paint.
   */
  public void paint(Graphics g, Shape a) {

    Rectangle alloc = (a instanceof Rectangle) ? (Rectangle) a : a.getBounds();
    tabBase = alloc.x;

    Graphics2D g2d = (Graphics2D) g;
    host = (RSyntaxTextArea) getContainer();
    int ascent = host.getMaxAscent();
    int fontHeight = host.getLineHeight();
    FoldManager fm = host.getFoldManager();
    TokenPainter painter = host.getTokenPainter();
    Element root = getElement();

    // Whether token styles should always be painted, even in selections
    int selStart = host.getSelectionStart();
    int selEnd = host.getSelectionEnd();
    boolean useSelectedTextColor = host.getUseSelectedTextColor();

    int n = getViewCount(); // Number of lines.
    int x = alloc.x + getLeftInset();
    tempRect.y = alloc.y + getTopInset();
    Rectangle clip = g.getClipBounds();
    for (int i = 0; i < n; i++) {

      tempRect.x = x + getOffset(X_AXIS, i);
      // tempRect.y = y + getOffset(Y_AXIS, i);
      tempRect.width = getSpan(X_AXIS, i);
      tempRect.height = getSpan(Y_AXIS, i);
      // System.err.println("For line " + i + ": tempRect==" + tempRect);

      if (tempRect.intersects(clip)) {
        Element lineElement = root.getElement(i);
        int startOffset = lineElement.getStartOffset();
        int endOffset = lineElement.getEndOffset() - 1; // Why always "-1"?
        View view = getView(i);
        if (!useSelectedTextColor
            || selStart == selEnd
            || (startOffset >= selEnd || endOffset < selStart)) {
          drawView(painter, g2d, alloc, view, fontHeight, tempRect.y + ascent);
        } else {
          // System.out.println("Drawing line with selection: " + i);
          drawViewWithSelection(
              painter, g2d, alloc, view, fontHeight, tempRect.y + ascent, selStart, selEnd);
        }
      }

      tempRect.y += tempRect.height;

      Fold possibleFold = fm.getFoldForLine(i);
      if (possibleFold != null && possibleFold.isCollapsed()) {
        i += possibleFold.getCollapsedLineCount();
        // Visible indicator of collapsed lines
        Color c = RSyntaxUtilities.getFoldedLineBottomColor(host);
        if (c != null) {
          g.setColor(c);
          g.drawLine(x, tempRect.y - 1, alloc.width, tempRect.y - 1);
        }
      }
    }
  }
Example #4
0
    /**
     * Provides a mapping from the document model coordinate space to the coordinate space of the
     * view mapped to it.
     *
     * @param pos the position to convert
     * @param a the allocated region to render into
     * @return the bounding box of the given position is returned
     * @exception BadLocationException if the given position does not represent a valid location in
     *     the associated document.
     */
    @Override
    public Shape modelToView(int pos, Shape a, Position.Bias b) throws BadLocationException {

      // System.err.println("--- begin modelToView ---");
      Rectangle alloc = a.getBounds();
      RSyntaxTextArea textArea = (RSyntaxTextArea) getContainer();
      alloc.height = textArea.getLineHeight(); // metrics.getHeight();
      alloc.width = 1;
      int p0 = getStartOffset();
      int p1 = getEndOffset();
      int testP = (b == Position.Bias.Forward) ? pos : Math.max(p0, pos - 1);

      // Get the token list for this line so we don't have to keep
      // recomputing it if this logical line spans multiple physical
      // lines.
      RSyntaxDocument doc = (RSyntaxDocument) getDocument();
      Element map = doc.getDefaultRootElement();
      int line = map.getElementIndex(p0);
      Token tokenList = doc.getTokenListForLine(line);
      float x0 = alloc.x; // 0;

      while (p0 < p1) {
        TokenSubList subList =
            TokenUtils.getSubTokenList(
                tokenList, p0, WrappedSyntaxView.this, textArea, x0, lineCountTempToken);
        x0 = subList != null ? subList.x : x0;
        tokenList = subList != null ? subList.tokenList : null;
        int p = calculateBreakPosition(p0, tokenList, x0);
        if ((pos >= p0) && (testP < p)) { // pos < p)) {
          // it's in this line
          alloc =
              RSyntaxUtilities.getLineWidthUpTo(
                  textArea, s, p0, pos, WrappedSyntaxView.this, alloc, alloc.x);
          // System.err.println("--- end modelToView ---");
          return alloc;
        }
        // if (p == p1 && pos == p1) {
        if (p == p1 - 1 && pos == p1 - 1) {
          // Wants end.
          if (pos > p0) {
            alloc =
                RSyntaxUtilities.getLineWidthUpTo(
                    textArea, s, p0, pos, WrappedSyntaxView.this, alloc, alloc.x);
          }
          // System.err.println("--- end modelToView ---");
          return alloc;
        }

        p0 = (p == p0) ? p1 : p;
        // System.err.println("... ... Incrementing y");
        alloc.y += alloc.height;
      }

      throw new BadLocationException(null, pos);
    }
Example #5
0
  /**
   * Sets the allocation rectangle for a given line's view, but sets the y value to the passed-in
   * value. This should be used instead of {@link #childAllocation(int, Rectangle)} since it allows
   * you to account for hidden lines in collapsed fold regions.
   *
   * @param line
   * @param y
   * @param alloc
   */
  private void childAllocation2(int line, int y, Rectangle alloc) {
    alloc.x += getOffset(X_AXIS, line);
    alloc.y += y;
    alloc.width = getSpan(X_AXIS, line);
    alloc.height = getSpan(Y_AXIS, line);

    // FIXME: This is required due to a bug that I can't track down.  The
    // top margin is being added twice somewhere in wrapped views, so we
    // have to adjust for it here.
    alloc.y -= host.getMargin().top;
  }
 private void adjust(
     Rectangle bounds, Dimension min, int deltaX, int deltaY, int deltaWidth, int deltaHeight) {
   bounds.x += deltaX;
   bounds.y += deltaY;
   bounds.width += deltaWidth;
   bounds.height += deltaHeight;
   if (min != null) {
     if (bounds.width < min.width) {
       int correction = min.width - bounds.width;
       if (deltaX != 0) {
         bounds.x -= correction;
       }
       bounds.width = min.width;
     }
     if (bounds.height < min.height) {
       int correction = min.height - bounds.height;
       if (deltaY != 0) {
         bounds.y -= correction;
       }
       bounds.height = min.height;
     }
   }
 }
 private void paintBorder(Graphics g, Rectangle cellRect, int row, int column) {
   if (grid.getSpanModel().isCellSpan(row, column)) {
     CellSpan span = grid.getSpanModel().getSpanOver(row, column);
     row = span.getRow();
     column = span.getColumn();
   }
   // Paint border
   javax.swing.border.Border border = grid.getStyleModel().getCellStyle(row, column).getBorder();
   Insets borderInsets = border.getBorderInsets(grid);
   Rectangle borderRect = new Rectangle(cellRect);
   int topOffset = (borderInsets.top >> 1);
   int leftOffset = (borderInsets.left >> 1);
   int bottomOffset = (borderInsets.bottom / 3) + topOffset;
   int rightOffset = (borderInsets.right / 3) + leftOffset;
   borderRect.x -= leftOffset;
   borderRect.y -= topOffset;
   borderRect.width += rightOffset;
   borderRect.height += bottomOffset;
   border.paintBorder(grid, g, borderRect.x, borderRect.y, borderRect.width, borderRect.height);
 }
  /**
   * Paints the word-wrapped text.
   *
   * @param g The graphics context in which to paint.
   * @param a The shape (usually a rectangle) in which to paint.
   */
  public void paint(Graphics g, Shape a) {

    Rectangle alloc = (a instanceof Rectangle) ? (Rectangle) a : a.getBounds();
    tabBase = alloc.x;

    Graphics2D g2d = (Graphics2D) g;
    host = (RSyntaxTextArea) getContainer();
    int ascent = host.getMaxAscent();
    int fontHeight = host.getLineHeight();
    FoldManager fm = host.getFoldManager();

    int n = getViewCount(); // Number of lines.
    int x = alloc.x + getLeftInset();
    tempRect.y = alloc.y + getTopInset();
    Rectangle clip = g.getClipBounds();
    for (int i = 0; i < n; i++) {
      tempRect.x = x + getOffset(X_AXIS, i);
      // tempRect.y = y + getOffset(Y_AXIS, i);
      tempRect.width = getSpan(X_AXIS, i);
      tempRect.height = getSpan(Y_AXIS, i);
      // System.err.println("For line " + i + ": tempRect==" + tempRect);
      if (tempRect.intersects(clip)) {
        View view = getView(i);
        drawView(g2d, alloc, view, fontHeight, tempRect.y + ascent);
      }
      tempRect.y += tempRect.height;
      Fold possibleFold = fm.getFoldForLine(i);
      if (possibleFold != null && possibleFold.isCollapsed()) {
        i += possibleFold.getCollapsedLineCount();
        // Visible indicator of collapsed lines
        Color c = RSyntaxUtilities.getFoldedLineBottomColor(host);
        if (c != null) {
          g.setColor(c);
          g.drawLine(x, tempRect.y - 1, alloc.width, tempRect.y - 1);
        }
      }
    }
  }
Example #9
0
    /**
     * Provides a mapping from the view coordinate space to the logical coordinate space of the
     * model.
     *
     * @param fx the X coordinate
     * @param fy the Y coordinate
     * @param a the allocated region to render into
     * @return the location within the model that best represents the given point in the view
     * @see View#viewToModel
     */
    @Override
    public int viewToModel(float fx, float fy, Shape a, Position.Bias[] bias) {

      // PENDING(prinz) implement bias properly
      bias[0] = Position.Bias.Forward;

      Rectangle alloc = (Rectangle) a;
      RSyntaxDocument doc = (RSyntaxDocument) getDocument();
      int x = (int) fx;
      int y = (int) fy;
      if (y < alloc.y) {
        // above the area covered by this icon, so the the position
        // is assumed to be the start of the coverage for this view.
        return getStartOffset();
      } else if (y > alloc.y + alloc.height) {
        // below the area covered by this icon, so the the position
        // is assumed to be the end of the coverage for this view.
        return getEndOffset() - 1;
      } else {

        // positioned within the coverage of this view vertically,
        // so we figure out which line the point corresponds to.
        // if the line is greater than the number of lines
        // contained, then simply use the last line as it represents
        // the last possible place we can position to.

        RSyntaxTextArea textArea = (RSyntaxTextArea) getContainer();
        alloc.height = textArea.getLineHeight();
        int p1 = getEndOffset();

        // Get the token list for this line so we don't have to keep
        // recomputing it if this logical line spans multiple
        // physical lines.
        Element map = doc.getDefaultRootElement();
        int p0 = getStartOffset();
        int line = map.getElementIndex(p0);
        Token tlist = doc.getTokenListForLine(line);

        // Look at each physical line-chunk of this logical line.
        while (p0 < p1) {

          // We can always use alloc.x since we always break
          // lines so they start at the beginning of a physical
          // line.
          TokenSubList subList =
              TokenUtils.getSubTokenList(
                  tlist, p0, WrappedSyntaxView.this, textArea, alloc.x, lineCountTempToken);
          tlist = subList != null ? subList.tokenList : null;
          int p = calculateBreakPosition(p0, tlist, alloc.x);

          // If desired view position is in this physical chunk.
          if ((y >= alloc.y) && (y < (alloc.y + alloc.height))) {

            // Point is to the left of the line
            if (x < alloc.x) {
              return p0;
            }

            // Point is to the right of the line
            else if (x > alloc.x + alloc.width) {
              return p - 1;
            }

            // Point is in this physical line!
            else {

              // Start at alloc.x since this chunk starts
              // at the beginning of a physical line.
              int n = tlist.getListOffset(textArea, WrappedSyntaxView.this, alloc.x, x);

              // NOTE:  We needed to add the max() with
              // p0 as getTokenListForLine returns -1
              // for empty lines (just a null token).
              // How did this work before?
              // FIXME:  Have null tokens have their
              // offset but a -1 length.
              return Math.max(Math.min(n, p1 - 1), p0);
            } // End of else.
          } // End of if ((y>=alloc.y) && ...

          p0 = (p == p0) ? p1 : p;
          alloc.y += alloc.height;
        } // End of while (p0<p1).

        return getEndOffset() - 1;
      } // End of else.
    }
Example #10
0
  /**
   * Adjusts the allocation given to the view to be a suitable allocation for a text field. If the
   * view has been allocated more than the preferred span vertically, the allocation is changed to
   * be centered vertically. Horizontally the view is adjusted according to the horizontal alignment
   * property set on the associated JTextField (if that is the type of the hosting component).
   *
   * @param a the allocation given to the view, which may need to be adjusted.
   * @return the allocation that the superclass should use.
   */
  protected Shape adjustAllocation(Shape a) {
    if (a != null) {
      Rectangle bounds = a.getBounds();
      int vspan = (int) getPreferredSpan(Y_AXIS);
      int hspan = (int) getPreferredSpan(X_AXIS);
      if (bounds.height != vspan) {
        int slop = bounds.height - vspan;
        bounds.y += slop / 2;
        bounds.height -= slop;
      }

      // horizontal adjustments
      Component c = getContainer();
      if (c instanceof JTextField) {
        JTextField field = (JTextField) c;
        BoundedRangeModel vis = field.getHorizontalVisibility();
        int max = Math.max(hspan, bounds.width);
        int value = vis.getValue();
        int extent = Math.min(max, bounds.width - 1);
        if ((value + extent) > max) {
          value = max - extent;
        }
        vis.setRangeProperties(value, extent, vis.getMinimum(), max, false);
        if (hspan < bounds.width) {
          // horizontally align the interior
          int slop = bounds.width - 1 - hspan;

          int align = ((JTextField) c).getHorizontalAlignment();
          if (Utilities.isLeftToRight(c)) {
            if (align == LEADING) {
              align = LEFT;
            } else if (align == TRAILING) {
              align = RIGHT;
            }
          } else {
            if (align == LEADING) {
              align = RIGHT;
            } else if (align == TRAILING) {
              align = LEFT;
            }
          }

          switch (align) {
            case SwingConstants.CENTER:
              bounds.x += slop / 2;
              bounds.width -= slop;
              break;
            case SwingConstants.RIGHT:
              bounds.x += slop;
              bounds.width -= slop;
              break;
          }
        } else {
          // adjust the allocation to match the bounded range.
          bounds.width = hspan;
          bounds.x -= vis.getValue();
        }
      }
      return bounds;
    }
    return null;
  }
 /**
  * Sets the allocation rectangle for a given line's view, but sets the y value to the passed-in
  * value. This should be used instead of {@link #childAllocation(int, Rectangle)} since it allows
  * you to account for hidden lines in collapsed fold regions.
  *
  * @param line
  * @param y
  * @param alloc
  */
 private void childAllocation2(int line, int y, Rectangle alloc) {
   alloc.x += getOffset(X_AXIS, line);
   alloc.y += y;
   alloc.width = getSpan(X_AXIS, line);
   alloc.height = getSpan(Y_AXIS, line);
 }
Example #12
0
  //
  // Build installer window
  //
  public static void showInstallerWindow() {
    _installerFrame = new JFrame(Config.getWindowTitle());

    Container cont = _installerFrame.getContentPane();
    cont.setLayout(new BorderLayout());

    // North pane
    Box topPane = new Box(BoxLayout.X_AXIS);
    JLabel title = new JLabel(Config.getWindowHeading());
    Font titleFont = new Font("SansSerif", Font.BOLD, 22);
    title.setFont(titleFont);
    title.setForeground(Color.black);

    // Create Sun logo
    URL urlLogo = Main.class.getResource(Config.getWindowLogo());
    Image img = Toolkit.getDefaultToolkit().getImage(urlLogo);
    MediaTracker md = new MediaTracker(_installerFrame);
    md.addImage(img, 0);
    try {
      md.waitForAll();
    } catch (Exception ioe) {
      Config.trace(ioe.toString());
    }
    if (md.isErrorID(0)) Config.trace("Error loading image");
    Icon sunLogo = new ImageIcon(img);
    JLabel logoLabel = new JLabel(sunLogo);
    logoLabel.setOpaque(true);
    topPane.add(topPane.createHorizontalStrut(5));
    topPane.add(title);
    topPane.add(topPane.createHorizontalGlue());
    topPane.add(logoLabel);
    topPane.add(topPane.createHorizontalStrut(5));

    // West Pane
    Box westPane = new Box(BoxLayout.X_AXIS);
    westPane.add(westPane.createHorizontalStrut(10));

    // South Pane
    Box bottomPane = new Box(BoxLayout.X_AXIS);
    bottomPane.add(bottomPane.createHorizontalGlue());
    JButton abortButton = new JButton(Config.getWindowAbortButton());
    abortButton.setMnemonic(Config.getWindowAbortMnemonic());
    bottomPane.add(abortButton);
    bottomPane.add(bottomPane.createHorizontalGlue());
    bottomPane.setBorder(BorderFactory.createEmptyBorder(0, 0, 5, 0));

    // Center Pane
    Box centerPane = new Box(BoxLayout.Y_AXIS);
    JLabel hidden = new JLabel(Config.getWindowHiddenLabel());
    hidden.setVisible(false);
    centerPane.add(hidden);
    _stepLabels = new JLabel[5];
    for (int i = 0; i < _stepLabels.length; i++) {
      _stepLabels[i] = new JLabel(Config.getWindowStep(i));
      _stepLabels[i].setEnabled(false);
      centerPane.add(_stepLabels[i]);

      // install label's length will expand,so set a longer size.
      if (i == STEP_INSTALL) {
        Dimension dim = new JLabel(Config.getWindowStepWait(STEP_INSTALL)).getPreferredSize();
        _stepLabels[i].setPreferredSize(dim);
      }
    }
    hidden = new JLabel(Config.getWindowHiddenLabel());
    hidden.setVisible(false);
    centerPane.add(hidden);

    // Setup box layout
    cont.add(topPane, "North");
    cont.add(westPane, "West");
    cont.add(bottomPane, "South");
    cont.add(centerPane, "Center");

    _installerFrame.pack();
    Dimension dim = _installerFrame.getSize();

    // hard code to ensure title is completely visible on Sol/lin.
    if (dim.width < 400) {
      dim.width = 400;
      _installerFrame.setSize(dim);
    }

    Rectangle size = _installerFrame.getBounds();
    Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
    size.width = Math.min(screenSize.width, size.width);
    size.height = Math.min(screenSize.height, size.height);
    // Put window at 1/4, 1/4 of screen resoluion
    _installerFrame.setBounds(
        (screenSize.width - size.width) / 4,
        (screenSize.height - size.height) / 4,
        size.width,
        size.height);

    // Setup event listners
    _installerFrame.addWindowListener(
        new WindowAdapter() {
          public void windowClosing(WindowEvent we) {
            installFailed("Window closed", null);
          }
        });

    abortButton.addActionListener(
        new ActionListener() {
          public void actionPerformed(ActionEvent ae) {
            installFailed("Abort pressed", null);
          }
        });

    // Show window
    _installerFrame.show();
  }
Example #13
0
  public static boolean showLicensing() {
    if (Config.getLicenseResource() == null) return true;
    ClassLoader cl = Main.class.getClassLoader();
    URL url = cl.getResource(Config.getLicenseResource());
    if (url == null) return true;

    String license = null;
    try {
      URLConnection con = url.openConnection();
      int size = con.getContentLength();
      byte[] content = new byte[size];
      InputStream in = new BufferedInputStream(con.getInputStream());
      in.read(content);
      license = new String(content);
    } catch (IOException ioe) {
      Config.trace("Got exception when reading " + Config.getLicenseResource() + ": " + ioe);
      return false;
    }

    // Build dialog
    JTextArea ta = new JTextArea(license);
    ta.setEditable(false);
    final JDialog jd = new JDialog(_installerFrame, true);
    Container comp = jd.getContentPane();
    jd.setTitle(Config.getLicenseDialogTitle());
    comp.setLayout(new BorderLayout(10, 10));
    comp.add(new JScrollPane(ta), "Center");
    Box box = new Box(BoxLayout.X_AXIS);
    box.add(box.createHorizontalStrut(10));
    box.add(new JLabel(Config.getLicenseDialogQuestionString()));
    box.add(box.createHorizontalGlue());
    JButton acceptButton = new JButton(Config.getLicenseDialogAcceptString());
    JButton exitButton = new JButton(Config.getLicenseDialogExitString());
    box.add(acceptButton);
    box.add(box.createHorizontalStrut(10));
    box.add(exitButton);
    box.add(box.createHorizontalStrut(10));
    jd.getRootPane().setDefaultButton(acceptButton);
    Box box2 = new Box(BoxLayout.Y_AXIS);
    box2.add(box);
    box2.add(box2.createVerticalStrut(5));
    comp.add(box2, "South");
    jd.pack();

    final boolean accept[] = new boolean[1];
    acceptButton.addActionListener(
        new ActionListener() {
          public void actionPerformed(ActionEvent e) {
            accept[0] = true;
            jd.hide();
            jd.dispose();
          }
        });

    exitButton.addActionListener(
        new ActionListener() {
          public void actionPerformed(ActionEvent e) {
            accept[0] = false;
            jd.hide();
            jd.dispose();
          }
        });

    // Apply any defaults the user may have, constraining to the size
    // of the screen, and default (packed) size.
    Rectangle size = new Rectangle(0, 0, 500, 300);
    Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
    size.width = Math.min(screenSize.width, size.width);
    size.height = Math.min(screenSize.height, size.height);
    // Center the window
    jd.setBounds(
        (screenSize.width - size.width) / 2,
        (screenSize.height - size.height) / 2,
        size.width,
        size.height);

    // Show dialog
    jd.show();

    return accept[0];
  }