Example #1
0
  /** Instrument the specified method to replace mapped calls. */
  public void instrument_method(Method m, MethodGen mg) {

    // Loop through each instruction, making substitutions
    InstructionList il = mg.getInstructionList();
    for (InstructionHandle ih = il.getStart(); ih != null; ) {
      if (debug_instrument_inst.enabled()) {
        debug_instrument_inst.log("instrumenting instruction %s%n", ih);
        // ih.getInstruction().toString(pool.getConstantPool()));
      }
      InstructionList new_il = null;

      // Remember the next instruction to process
      InstructionHandle next_ih = ih.getNext();

      // Get the translation for this instruction (if any)
      new_il = xform_inst(mg, ih.getInstruction());
      if (debug_instrument_inst.enabled()) debug_instrument_inst.log("  new inst: %s%n", new_il);

      // If this instruction was modified, replace it with the new
      // instruction list. If this instruction was the target of any
      // jumps or line numbers , replace them with the first
      // instruction in the new list
      replace_instructions(il, ih, new_il);

      ih = next_ih;
    }
  }
Example #2
0
  /**
   * Replace instruction ih in list il with the instructions in new_il. If new_il is null, do
   * nothing
   */
  protected static void replace_instructions(
      InstructionList il, InstructionHandle ih, InstructionList new_il) {

    if ((new_il == null) || new_il.isEmpty()) return;

    // If there is only one new instruction, just replace it in the handle
    if (new_il.getLength() == 1) {
      ih.setInstruction(new_il.getEnd().getInstruction());
      return;
    }

    // Get the start and end instruction of the new instructions
    InstructionHandle new_end = new_il.getEnd();
    InstructionHandle new_start = il.insert(ih, new_il);

    // Move all of the branches from the old instruction to the new start
    il.redirectBranches(ih, new_start);

    // Move other targets to the new instuctions.
    if (ih.hasTargeters()) {
      for (InstructionTargeter it : ih.getTargeters()) {
        if (it instanceof LineNumberGen) {
          it.updateTarget(ih, new_start);
        } else if (it instanceof LocalVariableGen) {
          it.updateTarget(ih, new_end);
        } else if (it instanceof CodeExceptionGen) {
          CodeExceptionGen exc = (CodeExceptionGen) it;
          if (exc.getStartPC() == ih) exc.updateTarget(ih, new_start);
          else if (exc.getEndPC() == ih) exc.updateTarget(ih, new_end);
          else if (exc.getHandlerPC() == ih) exc.setHandlerPC(new_start);
          else System.out.printf("Malformed CodeException: %s%n", exc);
        } else {
          System.out.printf("unexpected target %s%n", it);
        }
      }
    }

    // Remove the old handle.  There should be no targeters left to it.
    try {
      il.delete(ih);
    } catch (Exception e) {
      throw new Error("Can't delete instruction", e);
    }
  }
Example #3
0
  /**
   * Transforms invoke instructions that match the specified list for this class to call the
   * specified static call instead.
   */
  private InstructionList xform_inst(MethodGen mg, Instruction inst) {

    switch (inst.getOpcode()) {
      case Constants.INVOKESTATIC:
        {
          InstructionList il = new InstructionList();
          INVOKESTATIC is = (INVOKESTATIC) inst;
          String cname = is.getClassName(pgen);
          String mname = is.getMethodName(pgen);
          Type[] args = is.getArgumentTypes(pgen);
          MethodDef orig = new MethodDef(cname + "." + mname, args);
          MethodInfo call = method_map.get(orig);
          if (call != null) {
            call.cnt++;
            String classname = call.method_class;
            String methodname = mname;
            debug_map.log(
                "%s.%s: Replacing method %s.%s (%s) with %s.%s%n",
                mg.getClassName(),
                mg.getName(),
                cname,
                mname,
                UtilMDE.join(args, ", "),
                classname,
                methodname);
            il.append(
                ifact.createInvoke(
                    classname, methodname, is.getReturnType(pgen), args, Constants.INVOKESTATIC));
          }
          return (il);
        }

      case Constants.INVOKEVIRTUAL:
        {
          InstructionList il = new InstructionList();
          INVOKEVIRTUAL iv = (INVOKEVIRTUAL) inst;
          String cname = iv.getClassName(pgen);
          String mname = iv.getMethodName(pgen);
          Type[] args = iv.getArgumentTypes(pgen);
          Type instance_type = iv.getReferenceType(pgen);
          Type[] new_args = BCELUtil.insert_type(instance_type, args);
          MethodDef orig = new MethodDef(cname + "." + mname, args);
          if (debug_class) System.out.printf("looking for %s in map %s%n", orig, method_map);
          MethodInfo call = method_map.get(orig);
          if (call != null) {
            call.cnt++;
            String classname = call.method_class;
            String methodname = mname;
            debug_map.log(
                "Replacing method %s.%s (%s) with %s.%s%n",
                cname, mname, ArraysMDE.toString(args), classname, methodname);
            il.append(
                ifact.createInvoke(
                    classname,
                    methodname,
                    iv.getReturnType(pgen),
                    new_args,
                    Constants.INVOKESTATIC));
          }
          return (il);
        }

      default:
        return (null);
    }
  }
Example #4
0
  /**
   * Adds all the constants found in the given class into the given ConstantSet, and returns it.
   *
   * @see #getConstants(String)
   */
  public static ConstantSet getConstants(String classname, ConstantSet result) {

    ClassParser cp;
    JavaClass jc;
    try {
      String classfileBase = classname.replace('.', '/');
      InputStream is = ClassPath.SYSTEM_CLASS_PATH.getInputStream(classfileBase, ".class");
      cp = new ClassParser(is, classname);
      jc = cp.parse();
    } catch (java.io.IOException e) {
      throw new Error("IOException while reading '" + classname + "': " + e.getMessage());
    }
    result.classname = jc.getClassName();

    // Get all of the constants from the pool
    ConstantPool constant_pool = jc.getConstantPool();
    for (Constant c : constant_pool.getConstantPool()) {
      // System.out.printf ("*Constant = %s%n", c);
      if (c == null
          || c instanceof ConstantClass
          || c instanceof ConstantFieldref
          || c instanceof ConstantInterfaceMethodref
          || c instanceof ConstantMethodref
          || c instanceof ConstantNameAndType
          || c instanceof ConstantUtf8) {
        continue;
      }
      if (c instanceof ConstantString) {
        result.strings.add((String) ((ConstantString) c).getConstantValue(constant_pool));
      } else if (c instanceof ConstantDouble) {
        result.doubles.add((Double) ((ConstantDouble) c).getConstantValue(constant_pool));
      } else if (c instanceof ConstantFloat) {
        result.floats.add((Float) ((ConstantFloat) c).getConstantValue(constant_pool));
      } else if (c instanceof ConstantInteger) {
        result.ints.add((Integer) ((ConstantInteger) c).getConstantValue(constant_pool));
      } else if (c instanceof ConstantLong) {
        result.longs.add((Long) ((ConstantLong) c).getConstantValue(constant_pool));
      } else {
        throw new RuntimeException("Unrecognized constant of type " + c.getClass() + ": " + c);
      }
    }

    ClassGen gen = new ClassGen(jc);
    ConstantPoolGen pool = gen.getConstantPool();

    // Process the code in each method looking for literals
    for (Method m : jc.getMethods()) {
      MethodGen mg = new MethodGen(m, jc.getClassName(), pool);
      InstructionList il = mg.getInstructionList();
      if (il == null) {
        // System.out.println("No instructions for " + mg);
      } else {
        for (Instruction inst : il.getInstructions()) {
          switch (inst.getOpcode()) {

              // Compare two objects, no literals
            case Constants.IF_ACMPEQ:
            case Constants.IF_ACMPNE:
              break;

              // These instructions compare the integer on the top of the stack
              // to zero.  There are no literals here (except 0)
            case Constants.IFEQ:
            case Constants.IFNE:
            case Constants.IFLT:
            case Constants.IFGE:
            case Constants.IFGT:
            case Constants.IFLE:
              {
                break;
              }

              // Instanceof pushes either 0 or 1 on the stack depending on whether
              // the object on top of stack is of the specified type.
              // If were interested in class literals, this would be interesting
            case Constants.INSTANCEOF:
              break;

              // Duplicates the item on the top of stack.  No literal.
            case Constants.DUP:
              {
                break;
              }

              // Duplicates the item on the top of the stack and inserts it 2
              // values down in the stack.  No literals
            case Constants.DUP_X1:
              {
                break;
              }

              // Duplicates either the top 2 category 1 values or a single
              // category 2 value and inserts it 2 or 3 values down on the
              // stack.
            case Constants.DUP2_X1:
              {
                break;
              }

              // Duplicate either one category 2 value or two category 1 values.
            case Constants.DUP2:
              {
                break;
              }

              // Dup the category 1 value on the top of the stack and insert it either
              // two or three values down on the stack.
            case Constants.DUP_X2:
              {
                break;
              }

            case Constants.DUP2_X2:
              {
                break;
              }

              // Pop instructions discard the top of the stack.
            case Constants.POP:
              {
                break;
              }

              // Pops either the top 2 category 1 values or a single category 2 value
              // from the top of the stack.
            case Constants.POP2:
              {
                break;
              }

              // Swaps the two category 1 types on the top of the stack.
            case Constants.SWAP:
              {
                break;
              }

              // Compares two integers on the stack
            case Constants.IF_ICMPEQ:
            case Constants.IF_ICMPGE:
            case Constants.IF_ICMPGT:
            case Constants.IF_ICMPLE:
            case Constants.IF_ICMPLT:
            case Constants.IF_ICMPNE:
              {
                break;
              }

              // Get the value of a field
            case Constants.GETFIELD:
              {
                break;
              }

              // stores the top of stack into a field
            case Constants.PUTFIELD:
              {
                break;
              }

              // Pushes the value of a static field on the stack
            case Constants.GETSTATIC:
              {
                break;
              }

              // Pops a value off of the stack into a static field
            case Constants.PUTSTATIC:
              {
                break;
              }

              // pushes a local onto the stack
            case Constants.DLOAD:
            case Constants.DLOAD_0:
            case Constants.DLOAD_1:
            case Constants.DLOAD_2:
            case Constants.DLOAD_3:
            case Constants.FLOAD:
            case Constants.FLOAD_0:
            case Constants.FLOAD_1:
            case Constants.FLOAD_2:
            case Constants.FLOAD_3:
            case Constants.ILOAD:
            case Constants.ILOAD_0:
            case Constants.ILOAD_1:
            case Constants.ILOAD_2:
            case Constants.ILOAD_3:
            case Constants.LLOAD:
            case Constants.LLOAD_0:
            case Constants.LLOAD_1:
            case Constants.LLOAD_2:
            case Constants.LLOAD_3:
              {
                break;
              }

              // Pops a value off of the stack into a local
            case Constants.DSTORE:
            case Constants.DSTORE_0:
            case Constants.DSTORE_1:
            case Constants.DSTORE_2:
            case Constants.DSTORE_3:
            case Constants.FSTORE:
            case Constants.FSTORE_0:
            case Constants.FSTORE_1:
            case Constants.FSTORE_2:
            case Constants.FSTORE_3:
            case Constants.ISTORE:
            case Constants.ISTORE_0:
            case Constants.ISTORE_1:
            case Constants.ISTORE_2:
            case Constants.ISTORE_3:
            case Constants.LSTORE:
            case Constants.LSTORE_0:
            case Constants.LSTORE_1:
            case Constants.LSTORE_2:
            case Constants.LSTORE_3:
              {
                break;
              }

              // Push a value from the runtime constant pool.  We'll get these
              // values when processing the constant pool itself
            case Constants.LDC:
            case Constants.LDC_W:
            case Constants.LDC2_W:
              {
                break;
              }

              // Push the length of an array on the stack
            case Constants.ARRAYLENGTH:
              {
                break;
              }

              // Push small constants (-1..5) on the stack.  These literals are
              // too common to bother mentioning
            case Constants.DCONST_0:
            case Constants.DCONST_1:
            case Constants.FCONST_0:
            case Constants.FCONST_1:
            case Constants.FCONST_2:
            case Constants.ICONST_0:
            case Constants.ICONST_1:
            case Constants.ICONST_2:
            case Constants.ICONST_3:
            case Constants.ICONST_4:
            case Constants.ICONST_5:
            case Constants.ICONST_M1:
            case Constants.LCONST_0:
            case Constants.LCONST_1:
              {
                break;
              }

            case Constants.BIPUSH:
            case Constants.SIPUSH:
              {
                ConstantPushInstruction cpi = (ConstantPushInstruction) inst;
                result.ints.add((Integer) cpi.getValue());
                break;
              }

              // Primitive Binary operators.
            case Constants.DADD:
            case Constants.DCMPG:
            case Constants.DCMPL:
            case Constants.DDIV:
            case Constants.DMUL:
            case Constants.DREM:
            case Constants.DSUB:
            case Constants.FADD:
            case Constants.FCMPG:
            case Constants.FCMPL:
            case Constants.FDIV:
            case Constants.FMUL:
            case Constants.FREM:
            case Constants.FSUB:
            case Constants.IADD:
            case Constants.IAND:
            case Constants.IDIV:
            case Constants.IMUL:
            case Constants.IOR:
            case Constants.IREM:
            case Constants.ISHL:
            case Constants.ISHR:
            case Constants.ISUB:
            case Constants.IUSHR:
            case Constants.IXOR:
            case Constants.LADD:
            case Constants.LAND:
            case Constants.LCMP:
            case Constants.LDIV:
            case Constants.LMUL:
            case Constants.LOR:
            case Constants.LREM:
            case Constants.LSHL:
            case Constants.LSHR:
            case Constants.LSUB:
            case Constants.LUSHR:
            case Constants.LXOR:
              break;

            case Constants.LOOKUPSWITCH:
            case Constants.TABLESWITCH:
              break;

            case Constants.ANEWARRAY:
            case Constants.NEWARRAY:
              {
                break;
              }

            case Constants.MULTIANEWARRAY:
              {
                break;
              }

              // push the value at an index in an array
            case Constants.AALOAD:
            case Constants.BALOAD:
            case Constants.CALOAD:
            case Constants.DALOAD:
            case Constants.FALOAD:
            case Constants.IALOAD:
            case Constants.LALOAD:
            case Constants.SALOAD:
              {
                break;
              }

              // Pop the top of stack into an array location
            case Constants.AASTORE:
            case Constants.BASTORE:
            case Constants.CASTORE:
            case Constants.DASTORE:
            case Constants.FASTORE:
            case Constants.IASTORE:
            case Constants.LASTORE:
            case Constants.SASTORE:
              break;

            case Constants.ARETURN:
            case Constants.DRETURN:
            case Constants.FRETURN:
            case Constants.IRETURN:
            case Constants.LRETURN:
            case Constants.RETURN:
              {
                break;
              }

              // subroutine calls.
            case Constants.INVOKESTATIC:
            case Constants.INVOKEVIRTUAL:
            case Constants.INVOKESPECIAL:
            case Constants.INVOKEINTERFACE:
              break;

              // Throws an exception.
            case Constants.ATHROW:
              break;

              // Opcodes that don't need any modifications.  Here for reference
            case Constants.ACONST_NULL:
            case Constants.ALOAD:
            case Constants.ALOAD_0:
            case Constants.ALOAD_1:
            case Constants.ALOAD_2:
            case Constants.ALOAD_3:
            case Constants.ASTORE:
            case Constants.ASTORE_0:
            case Constants.ASTORE_1:
            case Constants.ASTORE_2:
            case Constants.ASTORE_3:
            case Constants.CHECKCAST:
            case Constants.D2F: // double to float
            case Constants.D2I: // double to integer
            case Constants.D2L: // double to long
            case Constants.DNEG: // Negate double on top of stack
            case Constants.F2D: // float to double
            case Constants.F2I: // float to integer
            case Constants.F2L: // float to long
            case Constants.FNEG: // Negate float on top of stack
            case Constants.GOTO:
            case Constants.GOTO_W:
            case Constants.I2B: // integer to byte
            case Constants.I2C: // integer to char
            case Constants.I2D: // integer to double
            case Constants.I2F: // integer to float
            case Constants.I2L: // integer to long
            case Constants.I2S: // integer to short
            case Constants.IFNONNULL:
            case Constants.IFNULL:
            case Constants.IINC: // increment local variable by a constant
            case Constants.INEG: // negate integer on top of stack
            case Constants.JSR: // pushes return address on the stack,
            case Constants.JSR_W:
            case Constants.L2D: // long to double
            case Constants.L2F: // long to float
            case Constants.L2I: // long to int
            case Constants.LNEG: // negate long on top of stack
            case Constants.MONITORENTER:
            case Constants.MONITOREXIT:
            case Constants.NEW:
            case Constants.NOP:
            case Constants.RET: // this is the internal JSR return
              break;

              // Make sure we didn't miss anything
            default:
              throw new Error("instruction " + inst + " unsupported");
          }
        }
      }
    }
    return result;
  }