/**
* Return the x-value corresponding to a vertical asymptote between two bounds. If the x-value
* does not exist, return Double.NaN.
*
* @param left the left bound
* @param right the right bound
* @return the x-value
*/
protected double findVA(double left, double right) {
double step = (right - left) / 10, firstY, nextY, firstX = left, nextX;
do {
nextX = firstX + step;
firstY = evaluate(firstX);
nextY = evaluate(nextX);
if ((isPositive(firstY) != isPositive(nextY))
|| (Double.isNaN(firstY) != Double.isNaN(nextY))
|| (isPositive(differentiate(firstX)) != isPositive(differentiate(nextX)))) {
step /= -10;
}
if (firstX > right) {
return Double.NaN;
}
if (detectConvergence(firstX, nextX)) {
if (Double.isNaN(Math.abs(nextY))
|| Double.isNaN(Math.abs(firstY))
|| Math.abs(nextY) > 100
|| Math.abs(firstY) > 100) {
return firstX;
} else {
step = (right - left) / 10;
nextX = advancePastConvergence(nextX, nextY, step);
}
}
firstX = nextX;
} while (!(firstX - step > right));
return Double.NaN;
}
/**
* Compare two doubles for equality by checking their relative difference. This method computes
* the difference between two values and checks that against the larger value using the desired
* relative difference.
*
* @param num1 the first number to be tested
* @param num2 the second number to be tested
* @param relDiff the fraction of the larger number that the difference must be less than
* @return whether or not the two values are essentially equal
*/
public static boolean compareDoubles(double num1, double num2, double relDiff) {
if (Double.isInfinite(num1) && Double.isInfinite(num2)) // check for infinity
{
return Double.isNaN(num1 - num2); // will result in NaN only if they are the same sign
}
double diff = Math.abs(num2 - num1);
double max = (Math.abs(num2) > Math.abs(num1)) ? Math.abs(num2) : Math.abs(num1);
if (max == 0.0) // if max is somehow exactly equal to zero
{
return compareToZero(diff, ZERO_EPSILON);
} else {
return diff / max < relDiff;
}
}
/**
* Evaluate the derivative of a function at a given x-value with or without an approximation.
*
* @param x the x-value
* @param useApprox whether or not to use an approximation
* @return f'(x)
*/
public double differentiate(double x, boolean useApprox) {
if (useApprox) {
final double STEP = Math.pow(10, -5);
double rightApprox, leftApprox;
rightApprox = (evaluate(x + STEP) - evaluate(x)) / STEP;
leftApprox = (evaluate(x - STEP) - evaluate(x)) / -STEP;
if (Math.abs(rightApprox - leftApprox) < Math.pow(10, -2)) {
return (rightApprox + leftApprox) / 2;
} else {
return Double.NaN;
}
} else {
return differentiate().evaluate(x);
}
}
/** {@inheritDoc} */
@Override
public double _evaluate(double x) {
return 1 / Math.tan(x);
}
/** {@inheritDoc} */
@Override
public double _evaluate(double x) {
return Math.acos(x);
}
/**
* Compare a double to zero using an epsilon value. Intended to be less restrictive than
* compareDoubles.
*
* @param num the number to be tested
* @param epsilon the value the number must be less than
* @return whether or not the number is essentially zero
*/
public static boolean compareToZero(double num, double epsilon) {
return Math.abs(num) < epsilon;
}
/**
* A rectangular function base class. Includes methods for evaluating, finding zeros,
* differentiating, and integrating.
*
* @author Nathan Lindquist
* @version 10 March 2013
*/
public abstract class Rectangular {
/** Relative difference constant for use in the package. */
public static final double RELATIVE_DIFF = Double.MIN_VALUE * 10;
/** Epsilon constant for comparing to zero. */
protected static final double ZERO_EPSILON = Math.pow(10, -10);
/** A small step size for moving past a convergence point. */
protected static final double CONVERGENCE_STEP = Math.pow(10, -10);
/** Construct a rectangular function. Only for use by subclasses. */
protected Rectangular() {}
/**
* Evaluates the function at a given value.
*
* @param x the x-value
* @return the corresponding y-value
*/
public abstract double evaluate(double x);
/**
* Find the left-most x-value that corresponds to the given y-value between two bounds. If the
* x-value does not exist, return Double.NaN.
*
* @param left the left bound
* @param right the right bound
* @param y the y-value
* @return the x-value
*/
public double findX(double left, double right, double y) {
return new SumFunction(this, new Constant(-y)).findZero(left, right);
}
/**
* Find all x-values that correspond to the given y-value between two bounds. If no x-values
* exist, return Double.NaN.
*
* @param left the left bound
* @param right the right bound
* @param y the y-value
* @return the x-value
*/
public DoubleSet findAllX(double left, double right, double y) {
return new SumFunction(this, new Constant(-y)).findAllZeros(left, right);
}
/**
* Finds the left-most zero between two bounds. If the zero does not exist, return Double.NaN.
*
* @param left the left bound
* @param right the right bound
* @return an ArrayList of x-values
*/
public abstract double findZero(double left, double right);
/**
* Find all zeros between two bounds. If no zeros exist, return an empty ArrayList.
*
* @param left the left bound
* @param right the right bound
* @return an ArrayList of zeros
*/
public abstract FiniteDoubleSet findAllZeros(double left, double right);
/**
* Return a Function object representing the derivative of this Function.
*
* @return the derivative
*/
public abstract Rectangular differentiate();
/**
* Evaluate the derivative at a given value.
*
* @param x the x-value
* @return f'(x)
*/
public double differentiate(double x) {
return differentiate(x, false);
}
/**
* Evaluate the derivative of a function at a given x-value with or without an approximation.
*
* @param x the x-value
* @param useApprox whether or not to use an approximation
* @return f'(x)
*/
public double differentiate(double x, boolean useApprox) {
if (useApprox) {
final double STEP = Math.pow(10, -5);
double rightApprox, leftApprox;
rightApprox = (evaluate(x + STEP) - evaluate(x)) / STEP;
leftApprox = (evaluate(x - STEP) - evaluate(x)) / -STEP;
if (Math.abs(rightApprox - leftApprox) < Math.pow(10, -2)) {
return (rightApprox + leftApprox) / 2;
} else {
return Double.NaN;
}
} else {
return differentiate().evaluate(x);
}
}
/**
* Return a Function object representing the indefinite integral of this Function (no constant
* term included).
*
* @return the indefinite integral
*/
public abstract Rectangular integrate();
/**
* Return the definite integral defined by two bounds using this function's antiderivative.
*
* @param left the left bound
* @param right the right bound
* @return the definite integral on [left, right]
*/
public double integrate(double left, double right) {
if (hasVA(left, right)) {
return Double.NaN;
}
return integrate(left, right, false);
}
/**
* Return the definite integral defined by two bounds, with or without an approximation. By
* default, the approximation uses Simpon's method to approximate the integral with 10000
* subdivisions.
*
* @param left the left bound
* @param right the right bound
* @param useApprox whether or not to use an approximation
* @return the definite integral on [left, right]
*/
public double integrate(double left, double right, boolean useApprox) {
if (useApprox) {
final int SUBDIV = 10000;
return simpsons(left, right, SUBDIV);
} else {
return integrate().evaluate(right) - integrate().evaluate(left);
}
}
/**
* Approximate the definite integral between two bounds by the left rectangle method.
*
* @param left the left bound
* @param right the right bound
* @param subdiv the number of subdivisions
* @return the lram approximation on [left, right]
*/
public double lram(double left, double right, int subdiv) {
if (hasVA(left, right)) {
return Double.NaN; // check for continuity
}
double x = left, step = (right - left) / subdiv, lram = 0;
// multiply y-value by length of base
for (int i = 0; i < subdiv; i++) {
if (Double.isNaN(evaluate(x))) {
return Double.NaN; // exit if not continuous
}
lram += evaluate(x) * step;
x += step;
}
return lram;
}
/**
* Approximate the definite integral between two bounds by the right rectangle method.
*
* @param left the left bound
* @param right the right bound
* @param subdiv the number of subdivisions
* @return the rram approximation on [left, right]
*/
public double rram(double left, double right, int subdiv) {
if (hasVA(left, right)) {
return Double.NaN; // check for continuity
}
double step = (right - left) / subdiv;
return lram(left + step, right + step, subdiv);
}
/**
* Approximate the definite integral between two bounds by the middle rectangle method.
*
* @param left the left bound
* @param right the right bound
* @param subdiv the number of subdivisions
* @return the mram approximation on [left, right]
*/
public double mram(double left, double right, int subdiv) {
if (hasVA(left, right)) {
return Double.NaN; // check for continuity
}
double step = (right - left) / subdiv;
return lram(left + step / 2, right + step / 2, subdiv);
}
/**
* Approximate the definite integral between two bounds by the trapezoid method.
*
* @param left the left bound
* @param right the right bound
* @param subdiv the number of subdivisions
* @return the trapezoid approximation on [left, right]
*/
public double trap(double left, double right, int subdiv) {
if (hasVA(left, right)) {
return Double.NaN; // check for continuity TODO: better way?
}
double x = left, step = (right - left) / subdiv, trap = 0;
// the formula is (right - left)/(2*width) * (y1 + 2*y2 + 2*y3 + ... + 2*y(n-1) + yn)
for (int i = 0; i <= subdiv; i++) {
if (Double.isNaN(evaluate(x))) {
return Double.NaN; // exit if not continuous
}
if (i == 0 || i == subdiv) {
trap += evaluate(x);
} else {
trap += evaluate(x) * 2;
}
x += step;
}
return trap * step / 2.0;
}
/**
* Approximate the definite integral between two bounds by Simpson's method.
*
* @param left the left bound
* @param right the right bound
* @param subdiv the number of subdivisions
* @return the Simpson's method approximation on [left, right]
*/
public double simpsons(double left, double right, int subdiv) {
// number of subdivisions must be even, and function must be continuous
if (subdiv % 2 != 0 || hasVA(left, right)) {
return Double.NaN;
}
double x = left, step = (right - left) / subdiv, simpsons = 0;
for (int i = 0; i <= subdiv; i++) {
if (Double.isNaN(evaluate(x))) {
return Double.NaN; // exit if not continuous
}
// formula: (right - left)/(3*width) * (y1 + 4*y2 + 2*y3 + 4*y4 + 2*y5 + ...
// + 4*y(n-1) + yn)
if (i == 0 || i == subdiv) {
simpsons += evaluate(x);
} else if (i % 2 == 1) {
simpsons += evaluate(x) * 4;
} else {
simpsons += evaluate(x) * 2;
}
x += step;
}
return simpsons * step / 3.0;
}
/**
* Get the function's domain bounded by two values.
*
* @param left the left bound
* @param right the right bound
* @return a FiniteDomain object representing the domain
*/
public abstract FiniteDomain getDomain(double left, double right);
/**
* Get the function's domain (unbounded).
*
* @return a FiniteDomain object representing the domain
*/
public FiniteDomain getDomain() {
return getDomain(Double.NEGATIVE_INFINITY, Double.POSITIVE_INFINITY);
}
/**
* Check if this function and another object are the same.
*
* @param o the Object to be tested
* @return true if they are equal
*/
@Override
public abstract boolean equals(Object o);
/**
* Return a string representation of this function.
*
* @return the string representation
*/
@Override
public abstract String toString();
/**
* Check for convergence of two values. More restrictive than default doubles comparison.
*
* @param firstX the first value to be tested
* @param nextX the second value to be tested
* @return whether or not the two values have converged
*/
protected boolean detectConvergence(double firstX, double nextX) {
return compareDoubles(firstX, nextX, RELATIVE_DIFF);
}
/**
* Check if a number is positive.
*
* @param num the number to be tested
* @return whether or not the number is greater than 0
*/
protected boolean isPositive(double num) {
return num > 0;
}
/**
* Return the x-value corresponding to a vertical asymptote between two bounds. If the x-value
* does not exist, return Double.NaN.
*
* @param left the left bound
* @param right the right bound
* @return the x-value
*/
protected double findVA(double left, double right) {
double step = (right - left) / 10, firstY, nextY, firstX = left, nextX;
do {
nextX = firstX + step;
firstY = evaluate(firstX);
nextY = evaluate(nextX);
if ((isPositive(firstY) != isPositive(nextY))
|| (Double.isNaN(firstY) != Double.isNaN(nextY))
|| (isPositive(differentiate(firstX)) != isPositive(differentiate(nextX)))) {
step /= -10;
}
if (firstX > right) {
return Double.NaN;
}
if (detectConvergence(firstX, nextX)) {
if (Double.isNaN(Math.abs(nextY))
|| Double.isNaN(Math.abs(firstY))
|| Math.abs(nextY) > 100
|| Math.abs(firstY) > 100) {
return firstX;
} else {
step = (right - left) / 10;
nextX = advancePastConvergence(nextX, nextY, step);
}
}
firstX = nextX;
} while (!(firstX - step > right));
return Double.NaN;
}
/**
* Compare two doubles for equality by checking their relative difference. This method computes
* the difference between two values and checks that against the larger value using the desired
* relative difference.
*
* @param num1 the first number to be tested
* @param num2 the second number to be tested
* @param relDiff the fraction of the larger number that the difference must be less than
* @return whether or not the two values are essentially equal
*/
public static boolean compareDoubles(double num1, double num2, double relDiff) {
if (Double.isInfinite(num1) && Double.isInfinite(num2)) // check for infinity
{
return Double.isNaN(num1 - num2); // will result in NaN only if they are the same sign
}
double diff = Math.abs(num2 - num1);
double max = (Math.abs(num2) > Math.abs(num1)) ? Math.abs(num2) : Math.abs(num1);
if (max == 0.0) // if max is somehow exactly equal to zero
{
return compareToZero(diff, ZERO_EPSILON);
} else {
return diff / max < relDiff;
}
}
/**
* Compare a double to zero using an epsilon value. Intended to be less restrictive than
* compareDoubles.
*
* @param num the number to be tested
* @param epsilon the value the number must be less than
* @return whether or not the number is essentially zero
*/
public static boolean compareToZero(double num, double epsilon) {
return Math.abs(num) < epsilon;
}
/**
* Check if the specified value is between or equal to the other two specified values. If it is,
* return the value; otherwise, return Double.NaN.
*
* @param left the left bound
* @param right the right bound
* @param value the value to be tested
* @return the value if in the range, Double.NaN otherwise
*/
protected static double valueInRange(double left, double right, double value) {
if (new Subset(left, right).contains(value)) {
return value;
} else {
return Double.NaN;
}
}
/**
* Check if a function has a vertical asymptote between two bounds.
*
* @param left the left bound
* @param right the right bound
* @return whether or not the vertical asymptote exists
*/
protected boolean hasVA(double left, double right) {
return !Double.isNaN(findVA(left, right));
}
/**
* Advance the current x-value beyond the convergence point in order to avoid infinite loops.
*
* @param x the current x-value
* @param y the current y-value
* @param step how far to advance
* @return the new x-value
*/
protected double advancePastConvergence(double x, double y, double step) {
x += step;
return x;
}
}
