/**
* Sends a signal to the specified resource with a success or failure status. You can use the
* SignalResource API in conjunction with a creation policy or update policy. AWS CloudFormation
* doesn't proceed with a stack creation or update until resources receive the required number of
* signals or the timeout period is exceeded. The SignalResource API is useful in cases where you
* want to send signals from anywhere other than an Amazon EC2 instance.
*
* @param signalResourceRequest The input for the <a>SignalResource</a> action.
* @sample AmazonCloudFormation.SignalResource
*/
@Override
public void signalResource(SignalResourceRequest signalResourceRequest) {
ExecutionContext executionContext = createExecutionContext(signalResourceRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request<SignalResourceRequest> request = null;
Response<Void> response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request =
new SignalResourceRequestMarshaller()
.marshall(super.beforeMarshalling(signalResourceRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler<Void> responseHandler = new StaxResponseHandler<Void>(null);
invoke(request, responseHandler, executionContext);
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
* Validates a specified template.
*
* @param validateTemplateRequest The input for <a>ValidateTemplate</a> action.
* @return Result of the ValidateTemplate operation returned by the service.
* @sample AmazonCloudFormation.ValidateTemplate
*/
@Override
public ValidateTemplateResult validateTemplate(ValidateTemplateRequest validateTemplateRequest) {
ExecutionContext executionContext = createExecutionContext(validateTemplateRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request<ValidateTemplateRequest> request = null;
Response<ValidateTemplateResult> response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request =
new ValidateTemplateRequestMarshaller()
.marshall(super.beforeMarshalling(validateTemplateRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
StaxResponseHandler<ValidateTemplateResult> responseHandler =
new StaxResponseHandler<ValidateTemplateResult>(
new ValidateTemplateResultStaxUnmarshaller());
response = invoke(request, responseHandler, executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
* You use this operation to change the parameters specified in the original manifest file by
* supplying a new manifest file. The manifest file attached to this request replaces the original
* manifest file. You can only use the operation after a CreateJob request but before the data
* transfer starts and you can only use it on jobs you own.
*
* @param updateJobRequest Container for the necessary parameters to execute the UpdateJob service
* method on AmazonImportExport.
* @return The response from the UpdateJob service method, as returned by AmazonImportExport.
* @throws MalformedManifestException
* @throws BucketPermissionException
* @throws InvalidAddressException
* @throws InvalidParameterException
* @throws UnableToUpdateJobIdException
* @throws MultipleRegionsException
* @throws InvalidVersionException
* @throws MissingParameterException
* @throws InvalidFileSystemException
* @throws CanceledJobIdException
* @throws MissingCustomsException
* @throws NoSuchBucketException
* @throws ExpiredJobIdException
* @throws InvalidAccessKeyIdException
* @throws InvalidCustomsException
* @throws InvalidManifestFieldException
* @throws MissingManifestFieldException
* @throws InvalidJobIdException
* @throws AmazonClientException If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example if a network connection
* is not available.
* @throws AmazonServiceException If an error response is returned by AmazonImportExport
* indicating either a problem with the data in the request, or a server side issue.
*/
public UpdateJobResult updateJob(UpdateJobRequest updateJobRequest) {
ExecutionContext executionContext = createExecutionContext(updateJobRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
Request<UpdateJobRequest> request = null;
Response<UpdateJobResult> response = null;
try {
awsRequestMetrics.startEvent(Field.RequestMarshallTime);
try {
request =
new UpdateJobRequestMarshaller().marshall(super.beforeMarshalling(updateJobRequest));
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
} finally {
awsRequestMetrics.endEvent(Field.RequestMarshallTime);
}
response = invoke(request, new UpdateJobResultStaxUnmarshaller(), executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
private <X, Y extends AmazonWebServiceRequest> Response<X> invoke(
Request<Y> request,
HttpResponseHandler<AmazonWebServiceResponse<X>> responseHandler,
ExecutionContext executionContext) {
request.setEndpoint(endpoint);
request.setTimeOffset(timeOffset);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
AWSCredentials credentials;
awsRequestMetrics.startEvent(Field.CredentialsRequestTime);
try {
credentials = awsCredentialsProvider.getCredentials();
} finally {
awsRequestMetrics.endEvent(Field.CredentialsRequestTime);
}
AmazonWebServiceRequest originalRequest = request.getOriginalRequest();
if (originalRequest != null && originalRequest.getRequestCredentials() != null) {
credentials = originalRequest.getRequestCredentials();
}
executionContext.setCredentials(credentials);
DefaultErrorResponseHandler errorResponseHandler =
new DefaultErrorResponseHandler(exceptionUnmarshallers);
return client.execute(request, responseHandler, errorResponseHandler, executionContext);
}
/**
* Deletes a specified stack. Once the call completes successfully, stack deletion starts. Deleted
* stacks do not show up in the DescribeStacks API if the deletion has been completed
* successfully.
*
* @param deleteStackRequest Container for the necessary parameters to execute the DeleteStack
* service method on AmazonCloudFormation.
* @throws AmazonClientException If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example if a network connection
* is not available.
* @throws AmazonServiceException If an error response is returned by AmazonCloudFormation
* indicating either a problem with the data in the request, or a server side issue.
*/
public void deleteStack(DeleteStackRequest deleteStackRequest) {
ExecutionContext executionContext = createExecutionContext(deleteStackRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request<DeleteStackRequest> request = null;
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
try {
request = new DeleteStackRequestMarshaller().marshall(deleteStackRequest);
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
invoke(request, null, executionContext);
} finally {
endClientExecution(awsRequestMetrics, request, null);
}
}
/**
* Creates a stack as specified in the template. After the call completes successfully, the stack
* creation starts. You can check the status of the stack via the DescribeStacks API.
*
* @param createStackRequest Container for the necessary parameters to execute the CreateStack
* service method on AmazonCloudFormation.
* @return The response from the CreateStack service method, as returned by AmazonCloudFormation.
* @throws AlreadyExistsException
* @throws LimitExceededException
* @throws InsufficientCapabilitiesException
* @throws AmazonClientException If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example if a network connection
* is not available.
* @throws AmazonServiceException If an error response is returned by AmazonCloudFormation
* indicating either a problem with the data in the request, or a server side issue.
*/
public CreateStackResult createStack(CreateStackRequest createStackRequest) {
ExecutionContext executionContext = createExecutionContext(createStackRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request<CreateStackRequest> request = null;
Response<CreateStackResult> response = null;
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
try {
request = new CreateStackRequestMarshaller().marshall(createStackRequest);
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
response = invoke(request, new CreateStackResultStaxUnmarshaller(), executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}
/**
* Returns a set of temporary security credentials for users who have been authenticated in a
* mobile or web application with a web identity provider, such as Amazon Cognito, Login with
* Amazon, Facebook, Google, or any OpenID Connect-compatible identity provider.
*
* <p><b>NOTE:</b> For mobile applications, we recommend that you use Amazon Cognito. You can use
* Amazon Cognito with the AWS SDK for iOS and the AWS SDK for Android to uniquely identify a user
* and supply the user with a consistent identity throughout the lifetime of an application. To
* learn more about Amazon Cognito, see Amazon Cognito Overview in the AWS SDK for Android
* Developer Guide guide and Amazon Cognito Overview in the AWS SDK for iOS Developer Guide.
*
* <p>Calling <code>AssumeRoleWithWebIdentity</code> does not require the use of AWS security
* credentials. Therefore, you can distribute an application (for example, on mobile devices) that
* requests temporary security credentials without including long-term AWS credentials in the
* application, and without deploying server-based proxy services that use long-term AWS
* credentials. Instead, the identity of the caller is validated by using a token from the web
* identity provider.
*
* <p>The temporary security credentials returned by this API consist of an access key ID, a
* secret access key, and a security token. Applications can use these temporary security
* credentials to sign calls to AWS service APIs. The credentials are valid for the duration that
* you specified when calling <code>AssumeRoleWithWebIdentity</code> , which can be from 900
* seconds (15 minutes) to 3600 seconds (1 hour). By default, the temporary security credentials
* are valid for 1 hour.
*
* <p>Optionally, you can pass an IAM access policy to this operation. If you choose not to pass a
* policy, the temporary security credentials that are returned by the operation have the
* permissions that are defined in the access policy of the role that is being assumed. If you
* pass a policy to this operation, the temporary security credentials that are returned by the
* operation have the permissions that are allowed by both the access policy of the role that is
* being assumed, <i> and </i> the policy that you pass. This gives you a way to further restrict
* the permissions for the resulting temporary security credentials. You cannot use the passed
* policy to grant permissions that are in excess of those allowed by the access policy of the
* role that is being assumed. For more information, see <a
* href="http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_control-access_assumerole.html">
* Permissions for AssumeRole, AssumeRoleWithSAML, and AssumeRoleWithWebIdentity </a> in the
* <i>Using IAM</i> .
*
* <p>Before your application can call <code>AssumeRoleWithWebIdentity</code> , you must have an
* identity token from a supported identity provider and create a role that the application can
* assume. The role that your application assumes must trust the identity provider that is
* associated with the identity token. In other words, the identity provider must be specified in
* the role's trust policy.
*
* <p>For more information about how to use web identity federation and the <code>
* AssumeRoleWithWebIdentity</code> API, see the following resources:
*
* <ul>
* <li><a href="http://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_providers_oidc_manual">
* Using Web Identity Federation APIs for Mobile Apps </a> and <a
* href="http://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_temp_request.html#api_assumerolewithwebidentity">
* Federation Through a Web-based Identity Provider </a> .
* <li><a href="https://web-identity-federation-playground.s3.amazonaws.com/index.html">Web
* Identity Federation Playground </a> . This interactive website lets you walk through the
* process of authenticating via Login with Amazon, Facebook, or Google, getting temporary
* security credentials, and then using those credentials to make a request to AWS.
* <li><a href="http://aws.amazon.com/sdkforios/">AWS SDK for iOS </a> and <a
* href="http://aws.amazon.com/sdkforandroid/">AWS SDK for Android </a> . These toolkits
* contain sample apps that show how to invoke the identity providers, and then how to use
* the information from these providers to get and use temporary security credentials.
* <li><a href="http://aws.amazon.com/articles/4617974389850313">Web Identity Federation with
* Mobile Applications </a> . This article discusses web identity federation and shows an
* example of how to use web identity federation to get access to content in Amazon S3.
* </ul>
*
* @param assumeRoleWithWebIdentityRequest Container for the necessary parameters to execute the
* AssumeRoleWithWebIdentity service method on AWSSecurityTokenService.
* @return The response from the AssumeRoleWithWebIdentity service method, as returned by
* AWSSecurityTokenService.
* @throws PackedPolicyTooLargeException
* @throws IDPRejectedClaimException
* @throws MalformedPolicyDocumentException
* @throws InvalidIdentityTokenException
* @throws ExpiredTokenException
* @throws IDPCommunicationErrorException
* @throws AmazonClientException If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example if a network connection
* is not available.
* @throws AmazonServiceException If an error response is returned by AWSSecurityTokenService
* indicating either a problem with the data in the request, or a server side issue.
*/
public AssumeRoleWithWebIdentityResult assumeRoleWithWebIdentity(
AssumeRoleWithWebIdentityRequest assumeRoleWithWebIdentityRequest) {
ExecutionContext executionContext = createExecutionContext(assumeRoleWithWebIdentityRequest);
AWSRequestMetrics awsRequestMetrics = executionContext.getAwsRequestMetrics();
Request<AssumeRoleWithWebIdentityRequest> request = null;
Response<AssumeRoleWithWebIdentityResult> response = null;
awsRequestMetrics.startEvent(Field.ClientExecuteTime);
try {
request =
new AssumeRoleWithWebIdentityRequestMarshaller()
.marshall(assumeRoleWithWebIdentityRequest);
// Binds the request metrics to the current request.
request.setAWSRequestMetrics(awsRequestMetrics);
response =
invoke(request, new AssumeRoleWithWebIdentityResultStaxUnmarshaller(), executionContext);
return response.getAwsResponse();
} finally {
endClientExecution(awsRequestMetrics, request, response);
}
}