public void notifyRead(int address) {
if (cpu.isFlashBusy) {
triggerAccessViolation("Flash read not allowed while BUSY flag set");
return;
}
if (DEBUG) {
if (wait == false && currentWriteMode == WriteMode.WRITE_BLOCK) {
log("Reading flash prohibited. Would read 0x3fff!!!");
log("CPU PC=$" + Utils.hex(cpu.getPC(), 4) + " read address $" + Utils.hex(address, 4));
}
}
}
private void triggerAccessViolation(String reason) {
logw(
WarningType.EXECUTION,
"Access violation: " + reason + ". PC=$" + Utils.hex(cpu.getPC(), 4));
statusreg |= ACCVIFG;
if (cpu.getSFR().isIEBitsSet(SFR.IE1, ACCVIE)) {
cpu.flagInterrupt(NMI_VECTOR, this, true);
}
}
public void write(int address, int value, boolean word, long cycles) {
if (address == offset) {
if ((value >> 8) == 0x5a) {
wdtctl = value & 0xff;
if (DEBUG)
log("Wrote to WDTCTL: " + Utils.hex8(wdtctl) + " from $" + Utils.hex(cpu.getPC(), 4));
// Is it on?
wdtOn = (value & 0x80) == 0;
// boolean lastACLK = sourceACLK;
sourceACLK = (value & WDTSSEL) != 0;
// scheduleTimer should use the current delay, so update delay each time
// issue: if WDTCNTCL is not active the timer should be recalculated but an new timer is
// scheduled
// if ((value & WDTCNTCL) != 0) {
// Clear timer => reset the delay
delay = DELAY[value & WDTISx];
// }
timerMode = (value & WDTMSEL) != 0;
// Start it if it should be started!
if (wdtOn) {
if (DEBUG) log("Setting WDTCNT to count: " + delay);
scheduleTimer();
} else {
// Stop it and remember current "delay" left!
wdtTrigger.remove();
}
} else {
// Trigger reset!!
logw(
WarningType.EXECUTION,
"illegal write to WDTCTL ("
+ value
+ ") from $"
+ Utils.hex(cpu.getPC(), 4)
+ " - reset!!!!");
cpu.flagInterrupt(resetVector, this, true);
}
}
}
@Override
public String getAddressAsString(int addr) {
return Utils.hex20(addr);
}
public void flashWrite(int address, int data, AccessMode dataMode) {
int wait_time = -1;
if (locked) {
if (DEBUG) {
log("Write to flash blocked because of LOCK flag.");
}
return;
}
if (cpu.isFlashBusy || wait == false) {
if (!((mode & BLKWRT) != 0 && wait)) {
triggerAccessViolation("Flash write prohbited while BUSY=1 or WAIT=0");
return;
}
}
switch (currentWriteMode) {
case ERASE_SEGMENT:
int a_area_start[] = new int[1];
int a_area_end[] = new int[1];
getSegmentRange(address, a_area_start, a_area_end);
int area_start = a_area_start[0];
int area_end = a_area_end[0];
if (DEBUG) {
log(
"Segment erase @"
+ Utils.hex(address, 4)
+ ": erasing area "
+ Utils.hex(area_start, 4)
+ "-"
+ Utils.hex(area_end, 4));
}
for (int i = area_start; i < area_end; i++) {
memory[i] = 0xff;
}
waitFlashProcess(SEGMENT_ERASE_TIME);
break;
case ERASE_MAIN:
if (!main_range.isInRange(address)) {
return;
}
for (int i = main_range.start; i < main_range.end; i++) {
memory[i] = 0xff;
}
waitFlashProcess(MASS_ERASE_TIME);
break;
case ERASE_ALL:
for (int i = main_range.start; i < main_range.end; i++) {
memory[i] = 0xff;
}
for (int i = info_range.start; i < main_range.end; i++) {
memory[i] = 0xff;
}
waitFlashProcess(MASS_ERASE_TIME);
break;
case WRITE_SINGLE:
case WRITE_BLOCK:
if (currentWriteMode == WriteMode.WRITE_BLOCK) {
wait = false;
// TODO: Register target block and verify all writes stay in the same
// block. What does the real hardware on random writes?!?
if (blockwriteCount == 0) {
wait_time = BLOCKWRITE_FIRST_TIME;
if (DEBUG) {
log("Flash write in block mode started @" + Utils.hex(address, 4));
}
if (addressInFlash(cpu.getPC())) {
logw(
WarningType.EXECUTION,
"Oops. Block write access only allowed when executing from RAM.");
}
} else {
wait_time = BLOCKWRITE_TIME;
}
} else {
wait_time = WRITE_TIME;
}
/* Flash memory allows clearing bits only */
memory[address] &= data & 0xff;
if (dataMode != AccessMode.BYTE) {
memory[address + 1] &= (data >> 8) & 0xff;
if (dataMode == AccessMode.WORD20) {
/* TODO should the write really write the full word? CHECK THIS */
memory[address + 2] &= (data >> 16) & 0xff;
memory[address + 3] &= (data >> 24) & 0xff;
}
}
if (DEBUG) {
log(
"Writing $"
+ Utils.hex20(data)
+ " to $"
+ Utils.hex(address, 4)
+ " ("
+ dataMode.bytes
+ " bytes)");
}
waitFlashProcess(wait_time);
break;
}
}