public SignExtend(UnaryOp cast) {
Iterator<Port> ports = cast.getDataPorts().iterator();
Port d_port = ports.next();
assert (d_port.isUsed()) : "Operand port in unary operation is set to unused.";
Bus d_bus = d_port.getBus();
assert (d_bus != null) : "Operand port in unary operation not attached to a bus.";
PortWire pwire = new PortWire(d_port);
if (pwire.getExpression() instanceof BaseNumber) {
// input is a constant value, so the resize should be a no-op?
} else {
if (pwire.getExpression() instanceof Wire) {
operand = (Wire) pwire.getExpression();
} else {
operand =
new Wire(ID.toVerilogIdentifier(ID.showLogical(cast)), d_port.getValue().getSize());
add(new Assign.Continuous(operand, new PortWire(d_port)));
produced_nets.add(operand);
}
result_wire = NetFactory.makeNet(cast.getResultBus());
produced_nets.add(result_wire);
int result_width = result_wire.getWidth();
/** unsigned value will be padded with zeros * */
add(
new Assign.Continuous(
result_wire,
new org.xronos.openforge.verilog.pattern.SignExtend(operand, result_width)));
}
}
protected Bus duplicateBus(Component c, Bus bus) {
Exit exit = getSidebandExit(c);
Bus dup = exit.makeDataBus(Component.SIDEBAND);
dup.setIDLogical(ID.showLogical(bus));
dup.copyAttributes(bus);
return dup;
}
Output(OutputPin opin, int nodeCount, int fontSize) {
super(ID.showLogical(opin), nodeCount, fontSize);
_graph.ln("Output Pin: " + opin);
graph(opin, nodeCount++);
Port p = opin.getPort();
Bus b = p.getBus();
graph(b.getOwner().getOwner(), nodeCount++);
graphEdges(opin);
}
Input(InputPin ipin, int nodeCount, int fontSize) {
super(ID.showLogical(ipin), nodeCount, fontSize);
graph(ipin, nodeCount++);
_graph.ln("Input Pin: " + ipin);
Bus b = ipin.getBus();
for (Port p : b.getPorts()) {
Component c = p.getOwner();
graph(c, nodeCount++);
graphEdges(c, b);
}
}
private static String getVerilogName(Object obj) {
return ID.toVerilogIdentifier(ID.showLogical(obj));
}
private void generateKickers() {
final GenericJob job = EngineThread.getGenericJob();
final boolean blockIO = !job.getUnscopedBooleanOptionValue(OptionRegistry.NO_BLOCK_IO); // If
// Do
// BlockIO
final boolean doBlockSched =
!job.getUnscopedBooleanOptionValue(OptionRegistry.SCHEDULE_NO_BLOCK_SCHEDULING);
final boolean moduleBuilder =
EngineThread.getGenericJob().getUnscopedBooleanOptionValue(OptionRegistry.MODULE_BUILDER);
final Map<String, Kicker> kickers = new HashMap<String, Kicker>();
for (Task task : design.getTasks()) {
final Call call = task.getCall();
final String domainSpec =
(String)
((OptionString) EngineThread.getGenericJob().getOption(OptionRegistry.CLOCK_DOMAIN))
.getValue(call.getSearchLabel());
if (!task.isKickerRequired()) {
// Ensure that the Go port is validly connected
if (!call.getGoPort().isConnected()) {
job.warn("Task " + call.showIDLogical() + " is not autostart and has no enabling signal");
Constant constant = new SimpleConstant(0, 1, false);
constant.pushValuesForward();
call.getGoPort().setBus(constant.getValueBus());
call.getGoPort().pushValueForward();
}
continue;
}
Kicker kicker;
final String kickerKey;
if (doBlockSched && !moduleBuilder) {
// Connect up a KickerContinuous that will keep us running at
// max rate indefinately. We expect only one task in block
// io, but if we have more than one, we need individual
// kickers so that we use the right clock/reset for each.
kicker = new Kicker.KickerContinuous();
// Use the kickers string b/c there will be a (unique)
// feedback from the task done
kickerKey = kicker.toString();
} else if (blockIO) {
boolean fbRequired = checkFeedback(call.getProcedure().getBody());
// System.out.println("Generated perpetual kicker withT/withoutF "
// + fbRequired + " feedback flop required");
// Connect up a KickerPerpetual that will keep us running
// indefinately. We expect only one task in block io, but
// if we have more than one, each needs its own kicker
// anyway (since we OR back in the done). We could use
// just one kicker for all and put the OR external but
// there is no Design level module to put this stuff in.
// Argh!
kicker = new Kicker.KickerPerpetual(fbRequired);
// Use the kickers string b/c there will be a (unique)
// feedback from the task done
kickerKey = kicker.toString();
} else {
if (moduleBuilder) {
continue;
}
// find a kicker that matches this calls clk and reset
// kickerKey = call.getClockName() + call.getResetName();
kickerKey = domainSpec;
kicker = kickers.get(kickerKey);
// if we didn't find it, construct a new one
if (kicker == null) {
kicker = new Kicker();
}
}
if (!kickers.containsKey(kickerKey)) {
kickers.put(kickerKey, kicker);
design.addComponentToDesign(kicker);
design.getClockDomain(domainSpec).connectComponentToDomain(kicker);
}
if (call.getGoPort().isUsed()) {
call.getGoPort().setBus(kicker.getDoneBus());
}
if (kicker.getRepeatPort() != null) {
Bus callDone = call.getExit(Exit.DONE).getDoneBus();
if (!callDone.isUsed()) {
// there is the off-chance that it has fixed timing
// and thus needs no done. Create a sequence of flops
// to bypass.
if (!call.getLatency().isFixed()) {
EngineThread.getEngine()
.fatalError(
"Unexpected internal state. Design does not have a control structure and has variable timing");
}
Bus done = kicker.getDoneBus();
for (int i = 0; i < call.getLatency().getMinClocks(); i++) {
// Needs RESET b/c it is in the control path
Reg flop = Reg.getConfigurableReg(Reg.REGR, ID.showLogical(call) + "_go_done_" + i);
design.getClockDomain(domainSpec).connectComponentToDomain(flop);
flop.getInternalResetPort().setBus(flop.getResetPort().getBus());
flop.getDataPort().setBus(done);
// Ensure that we've constant propagated the flop
flop.propagateValuesForward();
done = flop.getResultBus();
design.addComponentToDesign(flop);
}
callDone = done;
}
kicker.getRepeatPort().setBus(callDone);
}
}
}
