/**
* Creates an unbalanced placement for the sorted linear segments.
*
* @param layeredGraph the layered graph to create an unbalanced placement for.
*/
private void createUnbalancedPlacement(final LGraph layeredGraph) {
// How many nodes are currently placed in each layer
int[] nodeCount = new int[layeredGraph.getLayers().size()];
// The type of the node most recently placed in a given layer
NodeType[] recentNodeType = new NodeType[layeredGraph.getLayers().size()];
// Iterate through the linear segments (in proper order!) and place them
for (LinearSegment segment : linearSegments) {
// Determine the uppermost placement for the linear segment
double uppermostPlace = 0.0f;
for (LNode node : segment.nodes) {
NodeType nodeType = node.getType();
int layerIndex = node.getLayer().getIndex();
nodeCount[layerIndex]++;
// Calculate how much space to leave between the linear segment and the last
// node of the given layer
float spacing = spacings.edgeEdgeSpacing * spacings.inLayerSpacingFactor;
if (nodeCount[layerIndex] > 0) {
if (recentNodeType[layerIndex] != null) {
spacing = spacings.getVerticalSpacing(recentNodeType[layerIndex], nodeType);
}
}
uppermostPlace = Math.max(uppermostPlace, node.getLayer().getSize().y + spacing);
}
// Apply the uppermost placement to all elements
for (LNode node : segment.nodes) {
// Set the node position
node.getPosition().y = uppermostPlace + node.getMargin().top;
// Adjust layer size
Layer layer = node.getLayer();
layer.getSize().y =
uppermostPlace + node.getMargin().top + node.getSize().y + node.getMargin().bottom;
recentNodeType[layer.getIndex()] = node.getType();
}
}
}
/**
* Post-process the balanced placement by moving linear segments where obvious improvements can be
* made.
*
* @param layeredGraph the layered graph
*/
private void postProcess(final LGraph layeredGraph) {
// process each linear segment independently
for (LinearSegment segment : linearSegments) {
double minRoomAbove = Integer.MAX_VALUE, minRoomBelow = Integer.MAX_VALUE;
for (LNode node : segment.nodes) {
double roomAbove, roomBelow;
int index = node.getIndex();
// determine the amount by which the linear segment can be moved up without overlap
if (index > 0) {
LNode neighbor = node.getLayer().getNodes().get(index - 1);
float spacing = spacings.getVerticalSpacing(node, neighbor);
roomAbove =
node.getPosition().y
- node.getMargin().top
- (neighbor.getPosition().y
+ neighbor.getSize().y
+ neighbor.getMargin().bottom
+ spacing);
} else {
roomAbove = node.getPosition().y - node.getMargin().top;
}
minRoomAbove = Math.min(roomAbove, minRoomAbove);
// determine the amount by which the linear segment can be moved down without
// overlap
if (index < node.getLayer().getNodes().size() - 1) {
LNode neighbor = node.getLayer().getNodes().get(index + 1);
float spacing = spacings.getVerticalSpacing(node, neighbor);
roomBelow =
neighbor.getPosition().y
- neighbor.getMargin().top
- (node.getPosition().y + node.getSize().y + node.getMargin().bottom + spacing);
} else {
roomBelow = 2 * node.getPosition().y;
}
minRoomBelow = Math.min(roomBelow, minRoomBelow);
}
double minDisplacement = Integer.MAX_VALUE;
boolean foundPlace = false;
// determine the minimal displacement that would make one incoming edge straight
LNode firstNode = segment.nodes.get(0);
for (LPort target : firstNode.getPorts()) {
double pos = firstNode.getPosition().y + target.getPosition().y + target.getAnchor().y;
for (LEdge edge : target.getIncomingEdges()) {
LPort source = edge.getSource();
double d =
source.getNode().getPosition().y
+ source.getPosition().y
+ source.getAnchor().y
- pos;
if (Math.abs(d) < Math.abs(minDisplacement)
&& Math.abs(d) < (d < 0 ? minRoomAbove : minRoomBelow)) {
minDisplacement = d;
foundPlace = true;
}
}
}
// determine the minimal displacement that would make one outgoing edge straight
LNode lastNode = segment.nodes.get(segment.nodes.size() - 1);
for (LPort source : lastNode.getPorts()) {
double pos = lastNode.getPosition().y + source.getPosition().y + source.getAnchor().y;
for (LEdge edge : source.getOutgoingEdges()) {
LPort target = edge.getTarget();
double d =
target.getNode().getPosition().y
+ target.getPosition().y
+ target.getAnchor().y
- pos;
if (Math.abs(d) < Math.abs(minDisplacement)
&& Math.abs(d) < (d < 0 ? minRoomAbove : minRoomBelow)) {
minDisplacement = d;
foundPlace = true;
}
}
}
// if such a displacement could be found, apply it to the whole linear segment
if (foundPlace && minDisplacement != 0) {
for (LNode node : segment.nodes) {
node.getPosition().y += minDisplacement;
}
}
}
}
/**
* Put a node into the given linear segment and check for following parts of a long edge.
*
* @param node the node to put into the linear segment
* @param segment a linear segment
* @return {@code true} if the given node was not already part of another segment and was thus
* added to the given segment.
*/
private boolean fillSegment(final LNode node, final LinearSegment segment) {
NodeType nodeType = node.getType();
// handle initial big nodes as big node type
if (node.getProperty(InternalProperties.BIG_NODE_INITIAL)) {
nodeType = NodeType.BIG_NODE;
}
if (node.id >= 0) {
// The node is already part of another linear segment
return false;
} else if (segment.nodeType != null
&& (nodeType == NodeType.BIG_NODE && nodeType != segment.nodeType)) {
// Big nodes are not allowed to share a linear segment with other dummy nodes
return false;
} else {
// Add the node to the given linear segment
node.id = segment.id;
segment.nodes.add(node);
}
segment.nodeType = nodeType;
if (nodeType == NodeType.LONG_EDGE
|| nodeType == NodeType.NORTH_SOUTH_PORT
|| nodeType == NodeType.BIG_NODE) {
// This is a LONG_EDGE, NORTH_SOUTH_PORT or BIG_NODE dummy; check if any of its
// successors are of one of these types too. If so, we can form a linear segment
// with one of them. (not with more than one, though)
// Note 1: LONG_EDGES and NORTH_SOUTH_PORTs can share a common linear segment
// Note 2: we must take care not to make a segment out of nodes that are in the same layer
// Note 3: for BIG_NODEs also the first BIG_NODE_INITIAL which is no actual dummy node has
// to be considered here
for (LPort sourcePort : node.getPorts()) {
for (LPort targetPort : sourcePort.getSuccessorPorts()) {
LNode targetNode = targetPort.getNode();
NodeType targetNodeType = targetNode.getType();
if (node.getLayer() != targetNode.getLayer()) {
if (nodeType == NodeType.BIG_NODE) {
// current AND the next node are BIG_NODE dummies
if (targetNodeType == NodeType.BIG_NODE) {
if (fillSegment(targetNode, segment)) {
// We just added another node to this node's linear segment.
// That's quite enough.
return true;
}
}
} else {
// current no bignode and next node is LONG_EDGE and NORTH_SOUTH_PORT
if (targetNodeType == NodeType.LONG_EDGE
|| targetNodeType == NodeType.NORTH_SOUTH_PORT) {
if (fillSegment(targetNode, segment)) {
// We just added another node to this node's linear segment.
// That's quite enough.
return true;
}
}
}
}
}
}
}
return true;
}