Ejemplo n.º 1
0
 /** Trims all steps after endFrame. */
 protected void trimSteps() {
   // return if trimming not needed
   VideoClip clip = trackerPanel.getPlayer().getVideoClip();
   int n = clip.getFrameCount() - 1;
   int end = getEndFrame() == Integer.MAX_VALUE ? n : getEndFrame();
   while (end > getStartFrame() && !clip.includesFrame(end)) {
     end--;
   }
   if (end >= lastValidFrame) return;
   int trimCount = (tracePtsPerStep * (lastValidFrame - end)) / clip.getStepSize();
   ParticleModel[] models = getModels();
   for (ParticleModel next : models) {
     // create smaller trace arrays and copy existing points into them
     next.locked = false;
     int traceLength = next.traceX.length - trimCount;
     if (traceLength < 0) return; // trap for error during closing
     next.prevX = next.traceX;
     next.prevY = next.traceY;
     next.traceX = new double[traceLength];
     next.traceY = new double[traceLength];
     System.arraycopy(next.prevX, 0, next.traceX, 0, traceLength);
     System.arraycopy(next.prevY, 0, next.traceY, 0, traceLength);
     // reduce number of steps
     next.steps.setLength(end + 1);
     // refresh derivatives
     next.updateDerivatives(end - 2, lastValidFrame - end + 2);
     // restore state
     restoreState(end);
     next.support.firePropertyChange("steps", null, null); // $NON-NLS-1$
     next.locked = true;
   }
   lastValidFrame = end;
   repaint();
   //		trackerPanel.repaint();
 }
Ejemplo n.º 2
0
 /**
  * Sets the start frame for this model. Also sets the initial time to the video clip time at the
  * start frame.
  *
  * @param n the desired start frame
  */
 public void setStartFrame(int n) {
   VideoClip clip = trackerPanel.getPlayer().getVideoClip();
   n = Math.max(n, clip.getFirstFrameNumber()); // not less than first frame
   int end = clip.getLastFrameNumber();
   n = Math.min(n, end); // not greater than last frame
   n = Math.min(n, getEndFrame()); // not greater than endFrame
   if (n == startFrame) return;
   startFrame = n;
   refreshInitialTime();
   lastValidFrame = -1;
   refreshSteps();
   trackerPanel.repaint();
   firePropertyChange("model_start", null, getStartFrame()); // $NON-NLS-1$
 }
Ejemplo n.º 3
0
 /**
  * Sets the end frame for this model.
  *
  * @param n the desired end frame
  */
 public void setEndFrame(int n) {
   VideoClip clip = trackerPanel.getPlayer().getVideoClip();
   int end = clip.getLastFrameNumber();
   n = Math.max(n, 0); // not less than zero
   n = Math.max(n, getStartFrame()); // not less than startFrame
   if (n == getEndFrame()) return;
   endFrame = n < end ? n : Integer.MAX_VALUE;
   if (n < lastValidFrame) {
     trimSteps();
   } else {
     refreshSteps();
   }
   trackerPanel.repaint();
   firePropertyChange("model_end", null, getEndFrame()); // $NON-NLS-1$
 }
Ejemplo n.º 4
0
  /**
   * Overrides Step getMark method.
   *
   * @param trackerPanel the tracker panel
   * @return the mark
   */
  protected Mark getMark(TrackerPanel trackerPanel) {
    Mark mark = marks.get(trackerPanel);
    TPoint selection = null;
    if (mark == null) {
      selection = trackerPanel.getSelectedPoint();
      Point p = null; // draws this step as "selected" shape if not null
      valid = true; // true if step is not NaN
      for (int n = 0; n < points.length; n++) {
        if (!valid) continue;
        // determine if point is valid (ie not NaN)
        valid = valid && !Double.isNaN(points[n].getX()) && !Double.isNaN(points[n].getY());
        screenPoints[n] = points[n].getScreenPosition(trackerPanel);
        // step is "selected" if trackerPanel selectedPoint is position or selectedSteps contains
        // this step
        if (valid && (selection == points[n] || trackerPanel.selectedSteps.contains(this))) {
          p = screenPoints[n];
        }
      }
      if (p == null) {
        if (footprint instanceof PositionVectorFootprint) {
          twoPoints[0] = screenPoints[0];
          twoPoints[1] = trackerPanel.getSnapPoint().getScreenPosition(trackerPanel);
          mark = footprint.getMark(twoPoints);
        } else mark = footprint.getMark(screenPoints);
      } else {
        transform.setToTranslation(p.x, p.y);
        int scale = FontSizer.getIntegerFactor();
        if (scale > 1) {
          transform.scale(scale, scale);
        }
        final Color color = footprint.getColor();
        final Shape selectedShape = transform.createTransformedShape(selectionShape);
        mark =
            new Mark() {
              public void draw(Graphics2D g, boolean highlighted) {
                g.setRenderingHint(
                    RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
                Paint gpaint = g.getPaint();
                g.setPaint(color);
                g.fill(selectedShape);
                g.setPaint(gpaint);
              }

              public Rectangle getBounds(boolean highlighted) {
                return selectedShape.getBounds();
              }
            };
      }
      final Mark theMark = mark;
      mark =
          new Mark() {
            public void draw(Graphics2D g, boolean highlighted) {
              if (!valid) {
                return;
              }
              theMark.draw(g, highlighted);
            }

            public Rectangle getBounds(boolean highlighted) {
              return theMark.getBounds(highlighted);
            }
          };
      marks.put(trackerPanel, mark);
      // get new text layout
      String s = ""; // $NON-NLS-1$
      VideoClip clip = trackerPanel.getPlayer().getVideoClip();
      if (clip.getStepCount() != 1) {
        s += clip.frameToStep(getFrameNumber());
      }
      if (s.length() == 0) s = " "; // $NON-NLS-1$
      TextLayout layout = new TextLayout(s, textLayoutFont, frc);
      textLayouts.put(trackerPanel, layout);
      // get layout position (bottom left corner of text)
      p = getLayoutPosition(trackerPanel);
      Rectangle bounds = layoutBounds.get(trackerPanel);
      if (bounds == null) {
        bounds = new Rectangle();
        layoutBounds.put(trackerPanel, bounds);
      }
      Rectangle2D rect = layout.getBounds();
      // set bounds (top left corner and size)
      bounds.setRect(p.x, p.y - rect.getHeight(), rect.getWidth(), rect.getHeight());
    }
    return mark;
  }
Ejemplo n.º 5
0
 /** Refreshes step positions. */
 protected void refreshSteps() {
   locked = true;
   if (refreshStepsLater) return;
   // return if this is an empty dynamic system
   if (this instanceof DynamicSystem) {
     DynamicSystem system = (DynamicSystem) this;
     if (system.particles.length == 0) return;
   }
   if (trackerPanel != null) {
     refreshDerivsLater = trackerPanel.getPlayer().getClipControl().isPlaying();
     int n = trackerPanel.getFrameNumber();
     VideoClip clip = trackerPanel.getPlayer().getVideoClip();
     // determine last frame to be marked (must satisfy both model and clip)
     int end = Math.min(getEndFrame(), n);
     while (end > getStartFrame() && !clip.includesFrame(end)) {
       end--;
     }
     if (end <= lastValidFrame) return;
     if (lastValidFrame == -1) {
       reset(); // initializes model, sets lastValidFrame to marked frame, if any
       if (lastValidFrame == -1 || end <= lastValidFrame) return;
     }
     int start = lastValidFrame;
     Tracker.logTime(
         this.getClass().getSimpleName()
             + this.hashCode()
             + " refreshing steps "
             + start
             + " to "
             + end); //$NON-NLS-1$ //$NON-NLS-2$
     boolean singleStep = (end - start == 1);
     // step forward to end
     ImageCoordSystem coords = trackerPanel.getCoords();
     // get underlying coords if appropriate
     boolean useDefault = isUseDefaultReferenceFrame();
     while (useDefault && coords instanceof ReferenceFrame) {
       coords = ((ReferenceFrame) coords).getCoords();
     }
     double startTime = t0 + dt * tracePtsPerStep * (start - getStartFrame()) / clip.getStepSize();
     double stepSize = 1.0 * clip.getStepSize() / tracePtsPerStep;
     int stepCount = (tracePtsPerStep * (end - start)) / clip.getStepSize();
     ParticleModel[] models = getModels();
     // prepare larger trace arrays and copy existing points into them
     for (ParticleModel next : models) {
       next.locked = false;
       int traceLength = next.traceX.length + stepCount;
       next.prevX = next.traceX;
       next.prevY = next.traceY;
       next.traceX = new double[traceLength];
       next.traceY = new double[traceLength];
       System.arraycopy(next.prevX, 0, next.traceX, 0, next.prevX.length);
       System.arraycopy(next.prevY, 0, next.traceY, 0, next.prevY.length);
     }
     for (int i = 0; i < stepCount; i++) {
       int stepNumber = i + 1;
       int frameNumber = start + (int) (stepNumber * stepSize);
       time = startTime + stepNumber * dt;
       Point2D[] points = getNextTracePositions();
       if (points == null) continue;
       AffineTransform transform = coords.getToImageTransform(frameNumber);
       for (int j = 0; j < models.length; j++) {
         transform.transform(points[j], points[j]);
         // determine if point is invalid due to out of bounds
         boolean valid =
             Math.abs(points[j].getX()) < xLimit && Math.abs(points[j].getY()) < yLimit;
         if (!valid && !invalidWarningShown) {
           invalidWarningShown = true;
           Runnable runner = new Runnable() { // avoids deadlock?
                 public void run() {
                   //            		if (invalidWarningShown) return;
                   JOptionPane.showMessageDialog(
                       trackerPanel,
                       TrackerRes.getString("ParticleModel.Dialog.Offscreen.Message1")
                           + XML.NEW_LINE //$NON-NLS-1$
                           + TrackerRes.getString(
                               "ParticleModel.Dialog.Offscreen.Message2"), //$NON-NLS-1$
                       TrackerRes.getString("ParticleModel.Dialog.Offscreen.Title"), // $NON-NLS-1$
                       JOptionPane.WARNING_MESSAGE);
                 }
               };
           SwingUtilities.invokeLater(runner);
         }
         models[j].traceX[models[j].prevX.length + i] = valid ? points[j].getX() : Double.NaN;
         models[j].traceY[models[j].prevY.length + i] = valid ? points[j].getY() : Double.NaN;
         if (stepNumber % tracePtsPerStep == 0) { // refresh position step
           saveState(frameNumber);
           PositionStep step = (PositionStep) models[j].getStep(frameNumber);
           if (step == null) {
             step = createPositionStep(models[j], frameNumber, 0, 0);
             step.setFootprint(models[j].getFootprint());
             models[j].steps.setStep(frameNumber, step);
           }
           step.getPosition().setPosition(valid ? points[j] : nan); // this method is fast
         }
       }
     }
     int count = 4 + (end - start);
     int startUpdate = start;
     // step back twice to pick up possible valid derivatives
     if (startUpdate > clip.getStepSize()) startUpdate -= clip.getStepSize();
     if (startUpdate > clip.getStepSize()) startUpdate -= clip.getStepSize();
     lastValidFrame = end;
     for (ParticleModel next : models) {
       next.steps.setLength(end + 1);
       coords = trackerPanel.getCoords(); // get active coords
       // special treatment if this is the origin of current reference frame
       if (coords instanceof ReferenceFrame
           && ((ReferenceFrame) coords).getOriginTrack() == next) {
         // set origins of reference frame
         boolean prev = next.refreshing; // save refreshing value
         next.refreshing = true;
         ((ReferenceFrame) coords).setOrigins();
         // then set positions to zero wrt origins
         for (int i = 0; i < clip.getStepCount(); i++) {
           int frameNumber = clip.stepToFrame(i);
           PositionStep step = (PositionStep) next.getStep(frameNumber);
           if (step == null) continue;
           AffineTransform transform = coords.getToImageTransform(frameNumber);
           next.point.setLocation(0, 0);
           transform.transform(next.point, next.point);
           step.getPosition().setPosition(next.point); // this method is fast
         }
         next.refreshing = prev; // restore refreshing value
         if (!refreshDerivsLater) {
           next.updateDerivatives(startUpdate, count);
         }
       } else if (!refreshDerivsLater) {
         next.updateDerivatives(startUpdate, count);
       }
       if (next.vAtOrigin) next.vTailsToOriginItem.doClick();
       if (next.aAtOrigin) next.aTailsToOriginItem.doClick();
       if (!refreshDerivsLater) {
         if (singleStep)
           next.support.firePropertyChange("step", null, new Integer(n)); // $NON-NLS-1$
         else next.support.firePropertyChange("steps", null, null); // $NON-NLS-1$
       }
       // erase refreshed steps
       for (int i = start + 1; i <= end; i++) {
         Step step = next.getStep(i);
         if (step != null) step.erase();
       }
       next.locked = true;
     }
     trackerPanel.repaint();
   }
 }