Ejemplo n.º 1
0
 public void InitSerial(float portValue) {
   // initialize the serial port selected in the listBox
   println(
       "initializing serial "
           + PApplet.parseInt(portValue)
           + " in serial.list()"); // for debugging
   // grab the name of the serial port
   String portPos = Serial.list()[PApplet.parseInt(portValue)];
   // initialize the port
   serial = new Serial(this, portPos, 115200);
   // read bytes into a buffer until you get a linefeed (ASCII 10):
   serial.bufferUntil('\n');
   println("done init serial");
   // initialized com port flag
   init_com = 1;
 }
Ejemplo n.º 2
0
  public void controlEvent(ControlEvent theEvent) {
    // PulldownMenu is if type ControlGroup.
    // A controlEvent will be triggered from within the ControlGroup.
    // therefore you need to check the originator of the Event with
    // if (theEvent.isGroup())
    // to avoid an error message from controlP5.
    if (theEvent.isGroup()) {
      if (theEvent.group().name() == "ruleChoiceList") {
        //    println(theEvent.group().value()+" from "+theEvent.group());
        selectedRule = PApplet.parseInt(theEvent.group().value());
        // has to be here for the controlp5 library
      }
    } else if (theEvent.isController()) {
      //    println(theEvent.controller().value()+" from "+theEvent.controller());
    }

    //  switch(theEvent.controller().id()) {
    //    case(1):
    //    myColorRect = (int)(theEvent.controller().value());
    //    break;
    //    case(2):
    //    myColorBackground = (int)(theEvent.controller().value());
    //    break;
    //    case(3):
    //    println(theEvent.controller().stringValue());
    //    break;
    //  }

  }
Ejemplo n.º 3
0
  public void draw() {
    background(0);
    // Strings composition
    textFont(createFont("Arial bold", 24));
    fill(c_red);
    stroke(255);
    text("OpenWheels GUI V1.0", 20, 30);
    textSize(16);
    // textAlign(CENTER);
    fill(c_azure);
    text("Acc_RAW:  " + Acc_RAW, 150, 65);
    AccSlider.setValue(Acc_RAW);
    text("Gyro_RAW: " + Gyro_RAW, 150, 90);
    GyroSlider.setValue(Gyro_RAW);
    text("Acc_Angle:  " + Acc_Angle + "\u00b0", 150, 115);
    text("Gyro_Rate: " + Gyro_Rate + "\u00b0/sec", 150, 140);
    text("Drive: " + Drive, 150, 165);
    text("Steer: " + Steer, 150, 190);
    text("BatLevel: " + nf(BatLevel, 1, 1) + "V", 150, 215);
    text("Status: " + statusFlag, 150, 240);
    graphGauge();
    graphGrid();

    // call the function that plot the angular of acc, with few screen settings
    graphRoll(PApplet.parseFloat(Acc_Angle), VideoBuffer2, c_red); // xPos, YPos, YSpan
    // call the function that plot the estimate angular, with few screen settings
    graphRoll(Angle, VideoBuffer1, c_yellow); // xPos, YPos, YSpan

    // call arduino for data every timePolling [msec]
    int timePolling = 50; // 50msec=20Hz
    time1 = millis();
    if (init_com == 1) {
      while (serial.available() > 0) processSerialData();
      if ((time1 - time2) > timePolling) {
        if (requestPID == true) {
          serial.write('E');
          requestPID = false;
        } else if (writePID == true) {
          int P = PApplet.parseInt(conf_KP.value());
          int I = PApplet.parseInt(conf_KI.value());
          int D = PApplet.parseInt(conf_KD.value());
          char data[] = {0, 0, 0, 0, 0};
          data[0] = 'W';
          data[1] = PApplet.parseChar(P);
          data[2] = PApplet.parseChar(I);
          data[3] = PApplet.parseChar(D);
          data[4] = ' ';
          String str = new String(data);
          serial.write(str);
          println(str);
          // println(" P=" + P + " I=" + I + " D=" + D);
          writePID = false;
        }
        // else if (RUN==true ) {serial.write('A');}
        else {
          serial.write('A');
        }
        time2 = time1;
      }
    }
  }
Ejemplo n.º 4
0
  public void setup() {
    minim = new Minim(this);
    size(winWidth, winHeight, OPENGL);
    background(bGround);
    sm = new SceneManager(minim);
    rulesChecker = new RulesChecker();

    controlP5 = new ControlP5(this);
    // ruleChoiceList = controlP5.addDropdownList("ruleChoiceList",850,100,100,100);
    // customize(ruleChoiceList);
    selectedRule = 0;
    selectedCamera = 0;
    gl = ((PGraphicsOpenGL) g).gl;

    picker = new Picker(this);
    oscP5 = new OscP5(this, port);
    // TODO(sanjeet): Change the address
    interfaceAddr = new NetAddress("127.0.0.1", port);

    noStroke();
    lines = loadStrings("fileFriedrich.txt"); // Hardcoded input file name
    String[] tokens = split(lines[0], " ");
    if (tokens.length != 1) {
      println("Incorrect file format for number of cameras");
      return;
    }
    int numOfCams = PApplet.parseInt(tokens[0]);
    for (int i = 1; i < numOfCams + 1; i++) {

      tokens = split(lines[i], " ");
      float[] matrix = new float[16];
      for (int j = 0; j < tokens.length; j++) {
        matrix[j] = PApplet.parseFloat(tokens[j]);
      }

      cameras.add(new Cam(FloatBuffer.wrap(matrix))); // add all the cameras
    }

    tokens = split(lines[1 + numOfCams], " ");
    if (tokens.length != 1) {
      println("Incorrect file format for number of characters");
      return;
    }
    int numOfChars = PApplet.parseInt(tokens[0]);
    for (int i = 2 + numOfCams; i < lines.length; i++) {
      tokens = split(lines[i], " ");
      float[] matrix = new float[16];
      for (int j = 0; j < tokens.length; j++) {
        matrix[j] = PApplet.parseFloat(tokens[j]);
      }

      characters.add(new Character(FloatBuffer.wrap(matrix))); // add all the characters
    }

    characters.get(0).col = color(255, 255, 0);
    characters.get(1).col = color(255, 0, 255);

    timeline = new Timeline(sm);
    // add initial tick to the begining of the timeline
    timeline.addTick(cameras.get(0));

    debug = new Debug(controlP5);

    // title, start, end, initVal, xpos, ypos, width, height
    // controlP5.addSlider("Timeline", 0,120,0,100,winHeight-50,winWidth-200,30);

  }