protected void WriteConfigSettings() throws IOException {
WriteTitle("Configuration settings");
WriteComment("Possible configurations modes : WriteAll, WriteWithoutComments, WriteDisable");
WriteComment(" WriteAll - default");
WriteComment(" WriteWithoutComments - write config files without help comments");
WriteComment(" WriteDisable - did not write anything, only read. Use with caution!");
WriteValue(TCDefaultValues.SettingsMode.name(), this.SettingsMode.name());
WriteTitle("World modes");
WriteComment(
"Possible terrain modes : Normal, OldGenerator, TerrainTest, NotGenerate, Default");
WriteComment(" Normal - use all features");
WriteComment(" OldGenerator - generate land like 1.7.3 generator");
WriteComment(" TerrainTest - generate only terrain without any resources");
WriteComment(" NotGenerate - generate empty chunks");
WriteComment(" Default - use default Notch terrain generator");
WriteValue(TCDefaultValues.TerrainMode.name(), this.ModeTerrain.name());
WriteNewLine();
WriteComment("Possible biome modes : Normal, OldGenerator, Default");
WriteComment(" Normal - use all features");
WriteComment(" FromImage - get biomes from image file");
WriteComment(" OldGenerator - generate biome like 1.7.3 generator");
WriteComment(" Default - use default Notch biome generator");
WriteValue(TCDefaultValues.BiomeMode.name(), this.ModeBiome.name());
WriteTitle("Biome Generator Variables");
WriteComment(
"IMPORTANT value for generation. Bigger values appear to zoom out. All 'Sizes' must be smaller than this.");
WriteComment("Large %/total area biomes (Continents) must be set small, (limit=0)");
WriteComment(
"Small %/total area biomes (Oasis,Mountain Peaks) must be larger (limit=GenerationDepth)");
WriteComment("This could also represent \"Total number of biome sizes\" ");
WriteComment(
"Small values (about 1-2) and Large values (about 20) may affect generator performance.");
WriteValue(TCDefaultValues.GenerationDepth.name(), this.GenerationDepth);
WriteNewLine();
WriteComment(
"Max biome rarity from 1 to infinity. By default this is 100, but you can raise it for");
WriteComment(
"fine-grained control, or to create biomes with a chance of occurring smaller than 1/100.");
WriteValue(TCDefaultValues.BiomeRarityScale.name(), this.BiomeRarityScale);
WriteNewLine();
WriteComment(
"Land rarity from 100 to 1. If you set smaller than 90 and LandSize near 0 beware Big oceans.");
WriteValue(TCDefaultValues.LandRarity.name(), this.LandRarity);
WriteNewLine();
WriteComment("Land size from 0 to GenerationDepth.");
WriteValue(TCDefaultValues.LandSize.name(), this.LandSize);
WriteNewLine();
WriteComment(
"Make land more fuzzy and make lakes. Must be from 0 to GenerationDepth - LandSize");
WriteValue(TCDefaultValues.LandFuzzy.name(), this.LandFuzzy);
WriteNewLine();
WriteComment(
"Ice areas rarity from 100 to 1. If you set smaller than 90 and IceSize near 0 beware ice world");
WriteValue(TCDefaultValues.IceRarity.name(), this.IceRarity);
WriteNewLine();
WriteComment("Ice area size from 0 to GenerationDepth.");
WriteValue(TCDefaultValues.IceSize.name(), this.IceSize);
WriteNewLine();
WriteValue(TCDefaultValues.FrozenRivers.name(), this.FrozenRivers);
WriteNewLine();
WriteValue(TCDefaultValues.FrozenOcean.name(), this.FrozenOcean);
WriteNewLine();
WriteComment("River rarity.Must be from 0 to GenerationDepth.");
WriteValue(TCDefaultValues.RiverRarity.name(), this.RiverRarity);
WriteNewLine();
WriteComment("River size from 0 to GenerationDepth - RiverRarity");
WriteValue(TCDefaultValues.RiverSize.name(), this.RiverSize);
WriteNewLine();
WriteValue(TCDefaultValues.RiversEnabled.name(), this.RiversEnabled);
WriteNewLine();
WriteComment("Biomes which used in normal biome algorithm. Biome name is case sensitive.");
WriteValue(TCDefaultValues.NormalBiomes.name(), this.NormalBiomes);
WriteNewLine();
WriteComment("Biomes which used in ice biome algorithm. Biome name is case sensitive.");
WriteValue(TCDefaultValues.IceBiomes.name(), this.IceBiomes);
WriteNewLine();
WriteComment(
"Biomes which used as isles. You must set IsleInBiome in biome config for each biome here. Biome name is case sensitive.");
WriteValue(TCDefaultValues.IsleBiomes.name(), this.IsleBiomes);
WriteNewLine();
WriteComment(
"Biomes which used as borders. You must set BiomeIsBorder in biome config for each biome here. Biome name is case sensitive.");
WriteValue(TCDefaultValues.BorderBiomes.name(), this.BorderBiomes);
WriteNewLine(); // TODO Write correct help
WriteComment("List of ALL custom biomes.");
WriteComment("Example: ");
WriteComment(" CustomBiomes:TestBiome1, BiomeTest2");
WriteComment("This will add two biomes and generate biome config files");
WriteComment("Any changes here need server restart.");
/*
WriteComment("The id of the biome must be unique for all biomes on the server.");
WriteComment("The available id's range from "+idMin+" to "+idMax+" and the first 0 to "+(DefaultBiome.values().length-1)+" is occupied by vanilla minecraft biomes.");
WriteComment("To leave room for future vanilla biomes we suggest your custom biomes start at id "+idSuggestedCustomMin+".");
WriteComment("The id for the biome will be saved to disc together with the chunk data (new feature since the Anvil map format).");
WriteComment("This means that if you change the biome id after you generated your map, the ids in the map wont change.");
WriteComment("Orphaned ids are interpreted as id 1 = Plains. Example things that depend on the biome id is mob spawning and growth from saplings.");
*/
WriteCustomBiomes();
WriteTitle("Biome Image Generator Variables");
WriteNewLine();
WriteComment(
"Possible modes when generator outside image boundaries: Repeat, ContinueNormal, FillEmpty");
WriteComment(" Repeat - repeat image");
WriteComment(" ContinueNormal - continue normal generation");
WriteComment(" FillEmpty - fill by biome in \"ImageFillBiome settings\" ");
WriteValue(TCDefaultValues.ImageMode.name(), this.imageMode.name());
WriteNewLine();
WriteComment("Source png file for FromImage biome mode.");
WriteValue(TCDefaultValues.ImageFile.name(), this.imageFile);
WriteNewLine();
WriteComment("Biome name for fill outside image boundaries with FillEmpty mode.");
WriteValue(TCDefaultValues.ImageFillBiome.name(), this.imageFillBiome);
WriteNewLine();
WriteComment("Shifts map position from x=0 and z=0 coordinates.");
WriteValue(TCDefaultValues.ImageXOffset.name(), this.imageXOffset);
WriteValue(TCDefaultValues.ImageZOffset.name(), this.imageZOffset);
WriteTitle("Terrain Generator Variables");
WriteComment("Height bits determinate generation height. Min 5, max 8");
WriteComment("For example 7 = 128 height, 8 = 256 height");
WriteValue(TCDefaultValues.WorldHeightBits.name(), this.worldHeightBits);
WriteNewLine();
WriteComment(
"Set water level. Every empty block under this level will be fill water or another block from WaterBlock ");
WriteValue(TCDefaultValues.WaterLevelMax.name(), this.waterLevelMax);
WriteValue(TCDefaultValues.WaterLevelMin.name(), this.waterLevelMin);
WriteNewLine();
WriteComment("BlockId used as water in WaterLevel");
WriteValue(TCDefaultValues.WaterBlock.name(), this.waterBlock);
WriteNewLine();
WriteComment("BlockId used as ice");
WriteValue(TCDefaultValues.IceBlock.name(), this.iceBlock);
WriteNewLine();
WriteComment(
"Can increase (values greater than 0) or decrease (values less than 0) how much the landscape is fractured horizontally.");
WriteValue(TCDefaultValues.FractureHorizontal.name(), this.fractureHorizontal);
WriteNewLine();
WriteComment(
"Can increase (values greater than 0) or decrease (values less than 0) how much the landscape is fractured vertically.");
WriteComment(
"Positive values will lead to large cliffs/overhangs, floating islands, and/or a cavern world depending on other settings.");
WriteValue(TCDefaultValues.FractureVertical.name(), this.fractureVertical);
WriteNewLine();
WriteComment("Attempts to replace all surface stone with biome surface block");
WriteValue(TCDefaultValues.RemoveSurfaceStone.name(), this.removeSurfaceStone);
WriteNewLine();
WriteComment("Disable bottom of map bedrock generation");
WriteValue(TCDefaultValues.DisableBedrock.name(), this.disableBedrock);
WriteNewLine();
WriteComment("Enable ceiling of map bedrock generation");
WriteValue(TCDefaultValues.CeilingBedrock.name(), this.ceilingBedrock);
WriteNewLine();
WriteComment("Make bottom layer of bedrock flat");
WriteValue(TCDefaultValues.FlatBedrock.name(), this.flatBedrock);
WriteNewLine();
WriteComment("BlockId used as bedrock");
WriteValue(TCDefaultValues.BedrockobBlock.name(), this.bedrockBlock);
WriteTitle("Map objects");
WriteValue(TCDefaultValues.StrongholdsEnabled.name(), this.StrongholdsEnabled);
WriteValue(TCDefaultValues.VillagesEnabled.name(), this.VillagesEnabled);
WriteValue(TCDefaultValues.MineshaftsEnabled.name(), this.MineshaftsEnabled);
WriteValue(TCDefaultValues.PyramidsEnabled.name(), this.PyramidsEnabled);
WriteValue(TCDefaultValues.NetherFortressEnabled.name(), this.NetherFortress);
this.WriteTitle("World visual settings");
this.WriteComment(
"Warning this section will work only for clients with single version of TerrainControl");
WriteComment("World fog color");
WriteColorValue(TCDefaultValues.WorldFog.name(), this.WorldFog);
this.WriteNewLine();
WriteComment("World night fog color");
WriteColorValue(TCDefaultValues.WorldNightFog.name(), this.WorldNightFog);
this.WriteNewLine();
this.WriteTitle("BOB Objects Variables");
/*WriteNewLine();
WriteComment("Enable/disable custom objects");
this.WriteValue(TCDefaultValues.CustomObjects.name(), this.customObjects);
*/
WriteNewLine();
WriteComment("Number of attempts for place per chunk");
this.WriteValue(
TCDefaultValues.objectSpawnRatio.name(), Integer.valueOf(this.objectSpawnRatio).intValue());
/*
WriteNewLine();
WriteComment("Deny custom objects underFill even it enabled in objects ");
this.WriteValue(TCDefaultValues.DenyObjectsUnderFill.name(), this.denyObjectsUnderFill);
WriteNewLine();
WriteComment("Chance to grow custom instead normal tree from sapling .");
this.WriteValue(TCDefaultValues.customTreeChance.name(), this.customTreeChance);
*/
WriteTitle("Cave Variables");
WriteComment("TerrainControl attempts once per chunk to create a cave or cave system.");
WriteComment("This is chance of success on that attempt.");
WriteValue(TCDefaultValues.caveRarity.name(), this.caveRarity);
WriteNewLine();
WriteComment(
"If successful, It tries to add this many caves in that chunk but trends towards lower results.");
WriteComment("Input of 40 tends to result in 5-6 caves or cave systems starting per chunk.");
WriteValue(TCDefaultValues.caveFrequency.name(), this.caveFrequency);
WriteNewLine();
WriteComment("Trends towards lower elevations.");
WriteValue(TCDefaultValues.caveMinAltitude.name(), this.caveMinAltitude);
WriteValue(TCDefaultValues.caveMaxAltitude.name(), this.caveMaxAltitude);
WriteNewLine();
WriteComment(
"Chance that any cave made during \" caveFrequency\" will generate without a connecting cave or system.");
WriteComment(
"Will also attempt to create a pocket - a higher than normal density of cave systems nearby, however no guarantee of connecting to it.");
WriteValue(TCDefaultValues.individualCaveRarity.name(), this.individualCaveRarity);
WriteNewLine();
WriteComment(
"Number of attempts during \" caveFreqency\" to start a system instead of continuing a single cave.");
WriteComment("Warning:High values cause extremely slow world generation and lag.");
WriteValue(TCDefaultValues.caveSystemFrequency.name(), this.caveSystemFrequency);
WriteNewLine();
WriteComment(
"Adds additional attempts for cave pocket after \"individualCaveRarity\" attempts.");
WriteValue(TCDefaultValues.caveSystemPocketChance.name(), this.caveSystemPocketChance);
WriteNewLine();
WriteComment("When triggered, Overrides \"caveFrequency\"");
WriteValue(TCDefaultValues.caveSystemPocketMinSize.name(), this.caveSystemPocketMinSize);
WriteValue(TCDefaultValues.caveSystemPocketMaxSize.name(), this.caveSystemPocketMaxSize);
WriteNewLine();
WriteComment("Turns off Randomizer = CAVES EVERYWHERE!");
WriteValue(TCDefaultValues.evenCaveDistribution.name(), this.evenCaveDistribution);
WriteTitle("Canyon Variables");
WriteValue(TCDefaultValues.canyonRarity.name(), this.canyonRarity);
WriteValue(TCDefaultValues.canyonMinAltitude.name(), this.canyonMinAltitude);
WriteValue(TCDefaultValues.canyonMaxAltitude.name(), this.canyonMaxAltitude);
WriteValue(TCDefaultValues.canyonMinLength.name(), this.canyonMinLength);
WriteValue(TCDefaultValues.canyonMaxLength.name(), this.canyonMaxLength);
WriteValue(TCDefaultValues.canyonDepth.name(), this.canyonDepth);
WriteNewLine();
WriteTitle("Old Biome Generator Variables");
WriteComment("This generator works only with old terrain generator!");
// WriteComment("Since 1.8.3 notch take temperature from biomes, so changing this you can`t
// affect new biome generation ");
WriteValue(TCDefaultValues.oldBiomeSize.name(), this.oldBiomeSize);
WriteValue(TCDefaultValues.minMoisture.name(), this.minMoisture);
WriteValue(TCDefaultValues.maxMoisture.name(), this.maxMoisture);
WriteValue(TCDefaultValues.minTemperature.name(), this.minTemperature);
WriteValue(TCDefaultValues.maxTemperature.name(), this.maxTemperature);
}
@Override
protected void writeConfigSettings() throws IOException {
// The modes
writeBigTitle("The modes");
writeComment("What Terrain Control does with the config files.");
writeComment("Possible modes: WriteAll, WriteWithoutComments, WriteDisable");
writeComment(" WriteAll - default");
writeComment(" WriteWithoutComments - write config files without help comments");
writeComment(
" WriteDisable - doesn't write to the config files, it only reads. Doesn't auto-update the configs. Use with care!");
writeValue(TCDefaultValues.SettingsMode.name(), this.SettingsMode.name());
writeNewLine();
writeComment("Possible terrain modes: Normal, OldGenerator, TerrainTest, NotGenerate, Default");
writeComment(" Normal - use all features");
writeComment(" OldGenerator - generate land like 1.7.3 generator");
writeComment(" TerrainTest - generate only terrain without any resources");
writeComment(" NotGenerate - generate empty chunks");
writeComment(" Default - use default terrain generator");
writeValue(TCDefaultValues.TerrainMode.name(), this.ModeTerrain.name());
writeNewLine();
writeComment("Possible biome modes: Normal, OldGenerator, Default");
writeComment(" Normal - use all features");
writeComment(" FromImage - get biomes from image file");
writeComment(" OldGenerator - generate biome like the Beta 1.7.3 generator");
writeComment(" Default - use default Notch biome generator");
writeValue(
TCDefaultValues.BiomeMode.name(), TerrainControl.getBiomeModeManager().getName(biomeMode));
// Custom biomes
writeBigTitle("Custom biomes");
writeComment(
"You need to register your custom biomes here. This setting will make Terrain Control");
writeComment(
"generate setting files for them. However, it won't place them in the world automatically.");
writeComment("See the settings for your BiomeMode below on how to add them to the world.");
writeComment("");
writeComment("Syntax: CustomBiomes:BiomeName:id[,AnotherBiomeName:id[,...]]");
writeComment("Example: CustomBiomes:TestBiome1:30,BiomeTest2:31");
writeComment("This will add two biomes and generate the BiomeConfigs for them.");
writeComment("All changes here need a server restart.");
writeComment("");
writeComment("Due to the way Mojang's loading code works, all biome ids need to be unique");
writeComment(
"on the server. If you don't do this, the client will display the biomes just fine,");
writeComment(
"but the server can think it is another biome with the same id. This will cause saplings,");
writeComment("snowfall and mobs to work as in the other biome.");
writeComment("");
writeComment(
"The available ids range from 0 to 255 and the ids 0 to "
+ (DefaultBiome.values().length - 1)
+ " are occupied by vanilla minecraft");
writeComment(
"biomes. To leave room for new vanilla biomes, it is recommend to not use ids below 30.");
WriteCustomBiomes();
// Settings for BiomeMode:Normal
writeBigTitle("Settings for BiomeMode:Normal");
writeComment("Also applies if you are using BiomeMode:FromImage and ImageMode:ContinueNormal.");
writeNewLine();
writeComment(
"IMPORTANT value for generation. Bigger values appear to zoom out. All 'Sizes' must be smaller than this.");
writeComment("Large %/total area biomes (Continents) must be set small, (limit=0)");
writeComment(
"Small %/total area biomes (Oasis,Mountain Peaks) must be larger (limit=GenerationDepth)");
writeComment("This could also represent \"Total number of biome sizes\" ");
writeComment(
"Small values (about 1-2) and Large values (about 20) may affect generator performance.");
writeValue(TCDefaultValues.GenerationDepth.name(), this.GenerationDepth);
writeNewLine();
writeComment(
"Max biome rarity from 1 to infinity. By default this is 100, but you can raise it for");
writeComment(
"fine-grained control, or to create biomes with a chance of occurring smaller than 1/100.");
writeValue(TCDefaultValues.BiomeRarityScale.name(), this.BiomeRarityScale);
writeNewLine();
writeSmallTitle("Biome lists");
writeComment("Don't forget to register your custom biomes first in CustomBiomes!");
writeNewLine();
writeComment("Biomes which used in normal biome algorithm. Biome name is case sensitive.");
writeValue(TCDefaultValues.NormalBiomes.name(), this.NormalBiomes);
writeNewLine();
writeComment("Biomes which used in ice biome algorithm. Biome name is case sensitive.");
writeValue(TCDefaultValues.IceBiomes.name(), this.IceBiomes);
writeNewLine();
writeComment(
"Biomes which used as isles. You must set IsleInBiome in biome config for each biome here. Biome name is case sensitive.");
writeValue(TCDefaultValues.IsleBiomes.name(), this.IsleBiomes);
writeNewLine();
writeComment(
"Biomes which used as borders. You must set BiomeIsBorder in biome config for each biome here. Biome name is case sensitive.");
writeValue(TCDefaultValues.BorderBiomes.name(), this.BorderBiomes);
writeNewLine();
writeSmallTitle("Landmass settings (for NormalBiomes)");
writeComment(
"Land rarity from 100 to 1. If you set smaller than 90 and LandSize near 0 beware Big oceans.");
writeValue(TCDefaultValues.LandRarity.name(), this.LandRarity);
writeNewLine();
writeComment("Land size from 0 to GenerationDepth.");
writeValue(TCDefaultValues.LandSize.name(), this.LandSize);
writeNewLine();
writeComment(
"Make land more fuzzy and make lakes. Must be from 0 to GenerationDepth - LandSize");
writeValue(TCDefaultValues.LandFuzzy.name(), this.LandFuzzy);
writeNewLine();
writeSmallTitle("Ice area settings (for IceBiomes)");
writeComment(
"Ice areas rarity from 100 to 1. If you set smaller than 90 and IceSize near 0 beware ice world");
writeValue(TCDefaultValues.IceRarity.name(), this.IceRarity);
writeNewLine();
writeComment("Ice area size from 0 to GenerationDepth.");
writeValue(TCDefaultValues.IceSize.name(), this.IceSize);
writeNewLine();
writeValue(TCDefaultValues.FrozenOcean.name(), this.FrozenOcean);
writeNewLine();
writeSmallTitle("River settings");
writeComment("River rarity.Must be from 0 to GenerationDepth.");
writeValue(TCDefaultValues.RiverRarity.name(), this.RiverRarity);
writeNewLine();
writeComment("River size from 0 to GenerationDepth - RiverRarity");
writeValue(TCDefaultValues.RiverSize.name(), this.RiverSize);
writeNewLine();
writeValue(TCDefaultValues.RiversEnabled.name(), this.RiversEnabled);
writeNewLine();
// Settings for BiomeMode:FromImage
writeBigTitle("Settings for BiomeMode:FromImage");
writeComment(
"Possible modes when generator outside image boundaries: Repeat, ContinueNormal, FillEmpty");
writeComment(" Repeat - repeat image");
writeComment(" ContinueNormal - continue normal generation");
writeComment(" FillEmpty - fill by biome in \"ImageFillBiome settings\" ");
writeValue(TCDefaultValues.ImageMode.name(), this.imageMode.name());
writeNewLine();
writeComment("Source png file for FromImage biome mode.");
writeValue(TCDefaultValues.ImageFile.name(), this.imageFile);
writeNewLine();
writeComment("Biome name for fill outside image boundaries with FillEmpty mode.");
writeValue(TCDefaultValues.ImageFillBiome.name(), this.imageFillBiome);
writeNewLine();
writeComment("Shifts map position from x=0 and z=0 coordinates.");
writeValue(TCDefaultValues.ImageXOffset.name(), this.imageXOffset);
writeValue(TCDefaultValues.ImageZOffset.name(), this.imageZOffset);
// Terrain Generator Variables
writeBigTitle("Terrain Generator Variables");
writeComment("Height bits determinate generation height. Min 5, max 8");
writeComment("For example 7 = 128 height, 8 = 256 height");
writeValue(TCDefaultValues.WorldHeightBits.name(), this.worldHeightBits);
writeNewLine();
writeComment(
"Set water level. Every empty block under this level will be fill water or another block from WaterBlock ");
writeValue(TCDefaultValues.WaterLevelMax.name(), this.waterLevelMax);
writeValue(TCDefaultValues.WaterLevelMin.name(), this.waterLevelMin);
writeNewLine();
writeComment("BlockId used as water in WaterLevel");
writeValue(TCDefaultValues.WaterBlock.name(), this.waterBlock);
writeNewLine();
writeComment("BlockId used as ice");
writeValue(TCDefaultValues.IceBlock.name(), this.iceBlock);
writeNewLine();
writeComment(
"Can increase (values greater than 0) or decrease (values less than 0) how much the landscape is fractured horizontally.");
writeValue(TCDefaultValues.FractureHorizontal.name(), this.fractureHorizontal);
writeNewLine();
writeComment(
"Can increase (values greater than 0) or decrease (values less than 0) how much the landscape is fractured vertically.");
writeComment(
"Positive values will lead to large cliffs/overhangs, floating islands, and/or a cavern world depending on other settings.");
writeValue(TCDefaultValues.FractureVertical.name(), this.fractureVertical);
writeNewLine();
writeComment("Attempts to replace all surface stone with biome surface block");
writeValue(TCDefaultValues.RemoveSurfaceStone.name(), this.removeSurfaceStone);
writeNewLine();
writeComment("Disable bottom of map bedrock generation");
writeValue(TCDefaultValues.DisableBedrock.name(), this.disableBedrock);
writeNewLine();
writeComment("Enable ceiling of map bedrock generation");
writeValue(TCDefaultValues.CeilingBedrock.name(), this.ceilingBedrock);
writeNewLine();
writeComment("Make bottom layer of bedrock flat");
writeValue(TCDefaultValues.FlatBedrock.name(), this.flatBedrock);
writeNewLine();
writeComment("BlockId used as bedrock");
writeValue(TCDefaultValues.BedrockobBlock.name(), this.bedrockBlock);
if (objectSpawnRatio != 1) {
// Write the old objectSpawnRatio
writeNewLine();
writeComment(
"LEGACY setting for compability with old worlds. This setting should be kept at 1.");
writeComment(
"If the setting is set at 1, the setting will vanish from the config file. Readd it");
writeComment("manually with another value and it will be back.");
writeComment("");
writeComment(
"When using the UseWorld or UseBiome keyword for spawning custom objects, Terrain Control");
writeComment("spawns one of the possible custom objects. There is of course a chance that");
writeComment(
"the chosen object cannot spawn. This setting tells TC how many times it should");
writeComment("try to spawn that object.");
writeComment("This setting doesn't affect growing saplings anymore.");
this.writeValue(TCDefaultValues.objectSpawnRatio.name(), this.objectSpawnRatio);
}
// Strongholds
writeBigTitle("Strongholds");
writeComment(
"Not much is known about these settings. They are directly passed to the stronghold generator.");
writeValue(TCDefaultValues.StrongholdsEnabled.name(), this.strongholdsEnabled);
writeNewLine();
writeValue(TCDefaultValues.StrongholdCount.name(), this.strongholdCount);
writeNewLine();
writeValue(TCDefaultValues.StrongholdDistance.name(), this.strongholdDistance);
writeNewLine();
writeValue(TCDefaultValues.StrongholdSpread.name(), this.strongholdSpread);
// Villages
writeBigTitle("Villages");
writeComment("Whether the villages are enabled or not.");
writeValue(TCDefaultValues.VillagesEnabled.name(), this.villagesEnabled);
writeNewLine();
writeComment(
"The size of the village. Larger is bigger. Normal worlds have 0 as default, superflat worlds 1.");
writeValue(TCDefaultValues.VillageSize.name(), this.villageSize);
writeNewLine();
writeComment("The minimum distance between the village centers in chunks. Minimum value is 9.");
writeValue(TCDefaultValues.VillageDistance.name(), this.villageDistance);
// Rare buildings
writeBigTitle("Rare buildings");
writeComment("Rare buildings are either desert pyramids, jungle temples or swamp huts.");
writeNewLine();
writeComment("Whether rare buildings are enabled.");
writeValue(TCDefaultValues.RareBuildingsEnabled.name(), this.rareBuildingsEnabled);
writeNewLine();
writeComment("The minimum distance between rare buildings in chunks.");
writeValue(
TCDefaultValues.MinimumDistanceBetweenRareBuildings.name(),
this.minimumDistanceBetweenRareBuildings);
writeNewLine();
writeComment("The maximum distance between rare buildings in chunks.");
writeValue(
TCDefaultValues.MaximumDistanceBetweenRareBuildings.name(),
this.maximumDistanceBetweenRareBuildings);
// Other structures
writeBigTitle("Other structures");
writeValue(TCDefaultValues.MineshaftsEnabled.name(), this.mineshaftsEnabled);
writeValue(TCDefaultValues.NetherFortressesEnabled.name(), this.netherFortressesEnabled);
// Visual settings
this.writeBigTitle("Visual settings");
this.writeComment(
"Warning this section will work only for players with the single version of Terrain Control installed.");
writeComment("World fog color");
writeColorValue(TCDefaultValues.WorldFog.name(), this.WorldFog);
this.writeNewLine();
writeComment("World night fog color");
writeColorValue(TCDefaultValues.WorldNightFog.name(), this.WorldNightFog);
this.writeNewLine();
// Cave settings (still using code from Bucyruss' BiomeTerrainMod)
writeBigTitle("Cave settings");
writeComment(
"This controls the odds that a given chunk will host a single cave and/or the start of a cave system.");
writeValue(TCDefaultValues.caveRarity.name(), this.caveRarity);
writeNewLine();
writeComment(
"The number of times the cave generation algorithm will attempt to create single caves and cave");
writeComment(
"systems in the given chunk. This value is larger because the likelihood for the cave generation");
writeComment(
"algorithm to bailout is fairly high and it is used in a randomizer that trends towards lower");
writeComment(
"random numbers. With an input of 40 (default) the randomizer will result in an average random");
writeComment(
"result of 5 to 6. This can be turned off by setting evenCaveDistribution (below) to true.");
writeValue(TCDefaultValues.caveFrequency.name(), this.caveFrequency);
writeNewLine();
writeComment(
"Sets the minimum and maximum altitudes at which caves will be generated. These values are");
writeComment(
"used in a randomizer that trends towards lower numbers so that caves become more frequent");
writeComment(
"the closer you get to the bottom of the map. Setting even cave distribution (above) to true");
writeComment(
"will turn off this randomizer and use a flat random number generator that will create an even");
writeComment("density of caves at all altitudes.");
writeValue(TCDefaultValues.caveMinAltitude.name(), this.caveMinAltitude);
writeValue(TCDefaultValues.caveMaxAltitude.name(), this.caveMaxAltitude);
writeNewLine();
writeComment(
"The odds that the cave generation algorithm will generate a single cavern without an accompanying");
writeComment(
"cave system. Note that whenever the algorithm generates an individual cave it will also attempt to");
writeComment(
"generate a pocket of cave systems in the vicinity (no guarantee of connection or that the cave system");
writeComment("will actually be created).");
writeValue(TCDefaultValues.individualCaveRarity.name(), this.individualCaveRarity);
writeNewLine();
writeComment(
"The number of times the algorithm will attempt to start a cave system in a given chunk per cycle of");
writeComment(
"the cave generation algorithm (see cave frequency setting above). Note that setting this value too");
writeComment(
"high with an accompanying high cave frequency value can cause extremely long world generation time.");
writeValue(TCDefaultValues.caveSystemFrequency.name(), this.caveSystemFrequency);
writeNewLine();
writeComment(
"This can be set to create an additional chance that a cave system pocket (a higher than normal");
writeComment(
"density of cave systems) being started in a given chunk. Normally, a cave pocket will only be");
writeComment(
"attempted if an individual cave is generated, but this will allow more cave pockets to be generated");
writeComment("in addition to the individual cave trigger.");
writeValue(TCDefaultValues.caveSystemPocketChance.name(), this.caveSystemPocketChance);
writeNewLine();
writeComment(
"The minimum and maximum size that a cave system pocket can be. This modifies/overrides the");
writeComment("cave system frequency setting (above) when triggered.");
writeValue(TCDefaultValues.caveSystemPocketMinSize.name(), this.caveSystemPocketMinSize);
writeValue(TCDefaultValues.caveSystemPocketMaxSize.name(), this.caveSystemPocketMaxSize);
writeNewLine();
writeComment(
"Setting this to true will turn off the randomizer for cave frequency (above). Do note that");
writeComment(
"if you turn this on you will probably want to adjust the cave frequency down to avoid long");
writeComment("load times at world creation.");
writeValue(TCDefaultValues.evenCaveDistribution.name(), this.evenCaveDistribution);
// Canyon settings
writeBigTitle("Canyon settings");
writeValue(TCDefaultValues.canyonRarity.name(), this.canyonRarity);
writeValue(TCDefaultValues.canyonMinAltitude.name(), this.canyonMinAltitude);
writeValue(TCDefaultValues.canyonMaxAltitude.name(), this.canyonMaxAltitude);
writeValue(TCDefaultValues.canyonMinLength.name(), this.canyonMinLength);
writeValue(TCDefaultValues.canyonMaxLength.name(), this.canyonMaxLength);
writeValue(TCDefaultValues.canyonDepth.name(), this.canyonDepth);
// Settings for BiomeMode:OldGenerator
writeBigTitle("Settings for BiomeMode:OldGenerator");
writeComment("This generator works only with old terrain generator!");
writeValue(TCDefaultValues.oldBiomeSize.name(), this.oldBiomeSize);
writeValue(TCDefaultValues.minMoisture.name(), this.minMoisture);
writeValue(TCDefaultValues.maxMoisture.name(), this.maxMoisture);
writeValue(TCDefaultValues.minTemperature.name(), this.minTemperature);
writeValue(TCDefaultValues.maxTemperature.name(), this.maxTemperature);
}