/**
* Modifies the passed-in token list to start at the specified offset. For example, if the token
* list covered positions 20-60 in the document (inclusive) like so:
*
* <pre>
* [token1] -> [token2] -> [token3] -> [token4]
* 20 30 31 40 41 50 51 60
* </pre>
*
* and you used this method to make the token list start at position 44, then the token list would
* be modified to be the following:
*
* <pre>
* [part-of-old-token3] -> [token4]
* 44 50 51 60
* </pre>
*
* Tokens that come before the specified position are forever lost, and the token containing that
* position is made to begin at that position if necessary. All token types remain the same as
* they were originally.
*
* <p>This method can be useful if you are only interested in part of a token list (i.e., the line
* it represents), but you don't want to modify the token list yourself.
*
* @param tokenList The list to make start at the specified position. This parameter is modified.
* @param pos The position at which the new token list is to start. If this position is not in the
* passed-in token list, returned token list will either be <code>null</code> or the
* unpaintable token(s) at the end of the passed-in token list.
* @param e How to expand tabs.
* @param textArea The text area from which the token list came.
* @param x0 The initial x-pixel position of the old token list.
* @return The width, in pixels, of the part of the token list "removed from the front." This way,
* you know the x-offset of the "new" token list.
*/
public static float makeTokenListStartAt(
Token tokenList, int pos, TabExpander e, final RSyntaxTextArea textArea, float x0) {
Token t = tokenList;
// Loop through the token list until you find the one that contains
// pos. Remember the cumulative width of all of these tokens.
while (t != null && t.isPaintable() && !t.containsPosition(pos)) {
x0 += t.getWidth(textArea, e, x0);
t = t.getNextToken();
}
// Make the token that contains pos start at pos.
if (t != null && t.isPaintable() && t.offset != pos) {
// Number of chars between p0 and token start.
int difference = pos - t.offset;
x0 += t.getWidthUpTo(t.textCount - difference + 1, textArea, e, x0);
t.makeStartAt(pos);
}
// Make the passed-in token list point to the proper place.
// t can be null, for example, if line ends with unended MLC.
if (t != null && t.isPaintable()) tokenList.copyFrom(t);
else tokenList = null;
t = null;
// Return the x-offset (in pixels) of the newly-modified t.
return x0;
}
public Token getLastPaintableToken() {
Token t = this;
while (t.isPaintable()) {
Token next = t.getNextToken();
if (next == null || !next.isPaintable()) {
return t;
}
t = next;
}
return null;
}
/**
* Determines the width of the given token list taking tabs into consideration. This is
* implemented in a 1.1 style coordinate system where ints are used and 72dpi is assumed.
*
* <p>
*
* @param tokenList The token list list representing the text.
* @param textArea The text area in which this token list resides.
* @param e The tab expander. This value cannot be <code>null</code>.
* @param x0 The x-pixel coordinate of the start of the token list.
* @return The width of the token list, in pixels.
* @see #getTokenListWidthUpTo
*/
public static final float getTokenListWidth(
final Token tokenList, RSyntaxTextArea textArea, TabExpander e, float x0) {
float width = x0;
for (Token t = tokenList; t != null && t.isPaintable(); t = t.getNextToken()) {
width += t.getWidth(textArea, e, width);
}
return width - x0;
}
/**
* Modifies the passed-in token list to start at the specified offset. For example, if the token
* list covered positions 20-60 in the document (inclusive) like so:
*
* <pre>
* [token1] -> [token2] -> [token3] -> [token4]
* 20 30 31 40 41 50 51 60
* </pre>
*
* and you used this method to make the token list start at position 44, then the token list would
* be modified to be the following:
*
* <pre>
* [part-of-old-token3] -> [token4]
* 44 50 51 60
* </pre>
*
* Tokens that come before the specified position are forever lost, and the token containing that
* position is made to begin at that position if necessary. All token types remain the same as
* they were originally.
*
* <p>This method can be useful if you are only interested in part of a token list (i.e., the line
* it represents), but you don't want to modify the token list yourself.
*
* @param tokenList The list to make start at the specified position. This parameter is modified.
* @param pos The position at which the new token list is to start. If this position is not in the
* passed-in token list, returned token list will either be <code>null</code> or the
* unpaintable token(s) at the end of the passed-in token list.
* @param e How to expand tabs.
* @param textArea The text area from which the token list came.
* @param x0 The initial x-pixel position of the old token list.
* @param tempToken A temporary token to use when creating the token list result. This may be
* <code>null</code> but callers can pass in a "buffer" token for performance if desired.
* @return Information about the "sub" token list. This will be <code>null</code> if <code>pos
* </code> was not a valid offset into the token list.
* @see #getSubTokenList(Token, int, TabExpander, RSyntaxTextArea, float)
*/
public static TokenSubList getSubTokenList(
Token tokenList,
int pos,
TabExpander e,
final RSyntaxTextArea textArea,
float x0,
TokenImpl tempToken) {
if (tempToken == null) {
tempToken = new TokenImpl();
}
Token t = tokenList;
// Loop through the token list until you find the one that contains
// pos. Remember the cumulative width of all of these tokens.
while (t != null && t.isPaintable() && !t.containsPosition(pos)) {
x0 += t.getWidth(textArea, e, x0);
t = t.getNextToken();
}
// Make the token that contains pos start at pos.
if (t != null && t.isPaintable()) {
if (t.getOffset() != pos) {
// Number of chars between p0 and token start.
int difference = pos - t.getOffset();
x0 += t.getWidthUpTo(t.length() - difference + 1, textArea, e, x0);
tempToken.copyFrom(t);
tempToken.makeStartAt(pos);
return new TokenSubList(tempToken, x0);
} else { // t.getOffset()==pos
return new TokenSubList(t, x0);
}
}
// This could be a null token, so we need to just return it.
return new TokenSubList(tokenList, x0);
// return null;
}
/**
* Determines the width of the given token list taking tabs into consideration and only up to the
* given index in the document (exclusive).
*
* @param tokenList The token list representing the text.
* @param textArea The text area in which this token list resides.
* @param e The tab expander. This value cannot be <code>null</code>.
* @param x0 The x-pixel coordinate of the start of the token list.
* @param upTo The document position at which you want to stop, exclusive. If this position is
* before the starting position of the token list, a width of <code>0</code> will be returned;
* similarly, if this position comes after the entire token list, the width of the entire
* token list is returned.
* @return The width of the token list, in pixels, up to, but not including, the character at
* position <code>upTo</code>.
* @see #getTokenListWidth
*/
public static final float getTokenListWidthUpTo(
final Token tokenList, RSyntaxTextArea textArea, TabExpander e, float x0, int upTo) {
float width = 0;
for (Token t = tokenList; t != null && t.isPaintable(); t = t.getNextToken()) {
if (t.containsPosition(upTo)) {
return width + t.getWidthUpTo(upTo - t.offset, textArea, e, x0 + width);
}
width += t.getWidth(textArea, e, x0 + width);
}
return width;
}
/**
* This is called by the nested wrapped line views to determine the break location. This can be
* reimplemented to alter the breaking behavior. It will either break at word or character
* boundaries depending upon the break argument given at construction.
*/
protected int calculateBreakPosition(int p0, Token tokenList, float x0) {
// System.err.println("------ beginning calculateBreakPosition() --------");
int p = p0;
RSyntaxTextArea textArea = (RSyntaxTextArea) getContainer();
float currentWidth = getWidth();
if (currentWidth == Integer.MAX_VALUE) currentWidth = getPreferredSpan(X_AXIS);
// Make sure width>0; this is a huge hack to fix a bug where
// loading text into an RTextArea before it is visible if word wrap
// is enabled causes an infinite loop in calculateBreakPosition()
// because of the 0-width! We cannot simply check in setSize()
// because the width is set to 0 somewhere else too somehow...
currentWidth = Math.max(currentWidth, MIN_WIDTH);
Token t = tokenList;
while (t != null && t.isPaintable()) {
// FIXME: Replace the code below with the commented-out line below. This will
// allow long tokens to be broken at embedded spaces (such as MLC's). But it
// currently throws BadLocationExceptions sometimes...
float tokenWidth = t.getWidth(textArea, this, x0);
if (tokenWidth > currentWidth) {
// If the current token alone is too long for this line,
// break at a character boundary.
if (p == p0) {
return t.getOffsetBeforeX(textArea, this, 0, currentWidth);
}
// Return the first non-whitespace char (i.e., don't start
// off the continuation of a wrapped line with whitespace).
return t.isWhitespace() ? p + t.length() : p;
// return getBreakLocation(t, fm, x0, currentWidth, this);
}
currentWidth -= tokenWidth;
x0 += tokenWidth;
p += t.length();
// System.err.println("*** *** *** token fit entirely (width==" + tokenWidth + "), adding " +
// t.textCount + " to p, now p==" + p);
t = t.getNextToken();
}
// System.err.println("... ... whole line fits; returning p==" + p);
// System.err.println("------ ending calculateBreakPosition() --------");
// return p;
return p + 1;
}
public Token getLastNonCommentNonWhitespaceToken() {
Token last = null;
for (Token t = this; t != null && t.isPaintable(); t = t.getNextToken()) {
switch (t.getType()) {
case COMMENT_DOCUMENTATION:
case COMMENT_EOL:
case COMMENT_MULTILINE:
case COMMENT_KEYWORD:
case COMMENT_MARKUP:
case WHITESPACE:
break;
default:
last = t;
break;
}
}
return last;
}
/**
* Draws the passed-in text using syntax highlighting for the current language. It is assumed that
* the entire line is either not in a selected region, or painting with a selection-foreground
* color is turned off.
*
* @param painter The painter to render the tokens.
* @param token The list of tokens to draw.
* @param g The graphics context in which to draw.
* @param x The x-coordinate at which to draw.
* @param y The y-coordinate at which to draw.
* @return The x-coordinate representing the end of the painted text.
*/
private float drawLine(
TokenPainter painter, Token token, Graphics2D g, float x, float y, int line) {
float nextX = x; // The x-value at the end of our text.
boolean paintBG = host.getPaintTokenBackgrounds(line, y);
while (token != null && token.isPaintable() && nextX < clipEnd) {
nextX = painter.paint(token, g, nextX, y, host, this, clipStart, paintBG);
token = token.getNextToken();
}
// NOTE: We should re-use code from Token (paintBackground()) here,
// but don't because I'm just too lazy.
if (host.getEOLMarkersVisible()) {
g.setColor(host.getForegroundForTokenType(Token.WHITESPACE));
g.setFont(host.getFontForTokenType(Token.WHITESPACE));
g.drawString("\u00B6", nextX, y);
}
// Return the x-coordinate at the end of the painted text.
return nextX;
}
/**
* Draws a single view (i.e., a line of text for a wrapped view), wrapping the text onto multiple
* lines if necessary. Any selected text is rendered with the editor's "selected text" color.
*
* @param painter The painter to use to render tokens.
* @param g The graphics context in which to paint.
* @param r The rectangle in which to paint.
* @param view The <code>View</code> to paint.
* @param fontHeight The height of the font being used.
* @param y The y-coordinate at which to begin painting.
* @param selStart The start of the selection.
* @param selEnd The end of the selection.
*/
protected void drawViewWithSelection(
TokenPainter painter,
Graphics2D g,
Rectangle r,
View view,
int fontHeight,
int y,
int selStart,
int selEnd) {
float x = r.x;
LayeredHighlighter h = (LayeredHighlighter) host.getHighlighter();
RSyntaxDocument document = (RSyntaxDocument) getDocument();
Element map = getElement();
int p0 = view.getStartOffset();
int lineNumber = map.getElementIndex(p0);
int p1 = view.getEndOffset(); // - 1;
setSegment(p0, p1 - 1, document, drawSeg);
// System.err.println("drawSeg=='" + drawSeg + "' (p0/p1==" + p0 + "/" + p1 + ")");
int start = p0 - drawSeg.offset;
Token token = document.getTokenListForLine(lineNumber);
// If this line is an empty line, then the token list is simply a
// null token. In this case, the line highlight will be skipped in
// the loop below, so unfortunately we must manually do it here.
if (token != null && token.getType() == Token.NULL) {
h.paintLayeredHighlights(g, p0, p1, r, host, this);
return;
}
// Loop through all tokens in this view and paint them!
while (token != null && token.isPaintable()) {
int p = calculateBreakPosition(p0, token, x);
x = r.x;
h.paintLayeredHighlights(g, p0, p, r, host, this);
while (token != null && token.isPaintable() && token.getEndOffset() - 1 < p) { // <=p) {
// Selection starts in this token
if (token.containsPosition(selStart)) {
if (selStart > token.getOffset()) {
tempToken.copyFrom(token);
tempToken.textCount = selStart - tempToken.getOffset();
x = painter.paint(tempToken, g, x, y, host, this);
tempToken.textCount = token.length();
tempToken.makeStartAt(selStart);
// Clone required since token and tempToken must be
// different tokens for else statement below
token = new TokenImpl(tempToken);
}
int selCount = Math.min(token.length(), selEnd - token.getOffset());
if (selCount == token.length()) {
x = painter.paintSelected(token, g, x, y, host, this);
} else {
tempToken.copyFrom(token);
tempToken.textCount = selCount;
x = painter.paintSelected(tempToken, g, x, y, host, this);
tempToken.textCount = token.length();
tempToken.makeStartAt(token.getOffset() + selCount);
token = tempToken;
x = painter.paint(token, g, x, y, host, this);
}
}
// Selection ends in this token
else if (token.containsPosition(selEnd)) {
tempToken.copyFrom(token);
tempToken.textCount = selEnd - tempToken.getOffset();
x = painter.paintSelected(tempToken, g, x, y, host, this);
tempToken.textCount = token.length();
tempToken.makeStartAt(selEnd);
token = tempToken;
x = painter.paint(token, g, x, y, host, this);
}
// This token is entirely selected
else if (token.getOffset() >= selStart && token.getEndOffset() <= selEnd) {
x = painter.paintSelected(token, g, x, y, host, this);
}
// This token is entirely unselected
else {
x = painter.paint(token, g, x, y, host, this);
}
token = token.getNextToken();
}
// If there's a token that's going to be split onto the next line
if (token != null && token.isPaintable() && token.getOffset() < p) {
int tokenOffset = token.getOffset();
Token orig = token;
token =
new TokenImpl(
drawSeg, tokenOffset - start, p - 1 - start, tokenOffset, token.getType());
// Selection starts in this token
if (token.containsPosition(selStart)) {
if (selStart > token.getOffset()) {
tempToken.copyFrom(token);
tempToken.textCount = selStart - tempToken.getOffset();
x = painter.paint(tempToken, g, x, y, host, this);
tempToken.textCount = token.length();
tempToken.makeStartAt(selStart);
// Clone required since token and tempToken must be
// different tokens for else statement below
token = new TokenImpl(tempToken);
}
int selCount = Math.min(token.length(), selEnd - token.getOffset());
if (selCount == token.length()) {
x = painter.paintSelected(token, g, x, y, host, this);
} else {
tempToken.copyFrom(token);
tempToken.textCount = selCount;
x = painter.paintSelected(tempToken, g, x, y, host, this);
tempToken.textCount = token.length();
tempToken.makeStartAt(token.getOffset() + selCount);
token = tempToken;
x = painter.paint(token, g, x, y, host, this);
}
}
// Selection ends in this token
else if (token.containsPosition(selEnd)) {
tempToken.copyFrom(token);
tempToken.textCount = selEnd - tempToken.getOffset();
x = painter.paintSelected(tempToken, g, x, y, host, this);
tempToken.textCount = token.length();
tempToken.makeStartAt(selEnd);
token = tempToken;
x = painter.paint(token, g, x, y, host, this);
}
// This token is entirely selected
else if (token.getOffset() >= selStart && token.getEndOffset() <= selEnd) {
x = painter.paintSelected(token, g, x, y, host, this);
}
// This token is entirely unselected
else {
x = painter.paint(token, g, x, y, host, this);
}
token = new TokenImpl(orig);
((TokenImpl) token).makeStartAt(p);
}
p0 = (p == p0) ? p1 : p;
y += fontHeight;
} // End of while (token!=null && token.isPaintable()).
// NOTE: We should re-use code from Token (paintBackground()) here,
// but don't because I'm just too lazy.
if (host.getEOLMarkersVisible()) {
g.setColor(host.getForegroundForTokenType(Token.WHITESPACE));
g.setFont(host.getFontForTokenType(Token.WHITESPACE));
g.drawString("\u00B6", x, y - fontHeight);
}
}
/**
* Draws a single view (i.e., a line of text for a wrapped view), wrapping the text onto multiple
* lines if necessary.
*
* @param painter The painter to use to render tokens.
* @param g The graphics context in which to paint.
* @param r The rectangle in which to paint.
* @param view The <code>View</code> to paint.
* @param fontHeight The height of the font being used.
* @param y The y-coordinate at which to begin painting.
*/
protected void drawView(
TokenPainter painter, Graphics2D g, Rectangle r, View view, int fontHeight, int y) {
float x = r.x;
LayeredHighlighter h = (LayeredHighlighter) host.getHighlighter();
RSyntaxDocument document = (RSyntaxDocument) getDocument();
Element map = getElement();
int p0 = view.getStartOffset();
int lineNumber = map.getElementIndex(p0);
int p1 = view.getEndOffset(); // - 1;
setSegment(p0, p1 - 1, document, drawSeg);
// System.err.println("drawSeg=='" + drawSeg + "' (p0/p1==" + p0 + "/" + p1 + ")");
int start = p0 - drawSeg.offset;
Token token = document.getTokenListForLine(lineNumber);
// If this line is an empty line, then the token list is simply a
// null token. In this case, the line highlight will be skipped in
// the loop below, so unfortunately we must manually do it here.
if (token != null && token.getType() == Token.NULL) {
h.paintLayeredHighlights(g, p0, p1, r, host, this);
return;
}
// Loop through all tokens in this view and paint them!
while (token != null && token.isPaintable()) {
int p = calculateBreakPosition(p0, token, x);
x = r.x;
h.paintLayeredHighlights(g, p0, p, r, host, this);
while (token != null && token.isPaintable() && token.getEndOffset() - 1 < p) { // <=p) {
x = painter.paint(token, g, x, y, host, this);
token = token.getNextToken();
}
if (token != null && token.isPaintable() && token.getOffset() < p) {
int tokenOffset = token.getOffset();
tempToken.set(
drawSeg.array, tokenOffset - start, p - 1 - start, tokenOffset, token.getType());
painter.paint(tempToken, g, x, y, host, this);
tempToken.copyFrom(token);
tempToken.makeStartAt(p);
token = new TokenImpl(tempToken);
}
p0 = (p == p0) ? p1 : p;
y += fontHeight;
} // End of while (token!=null && token.isPaintable()).
// NOTE: We should re-use code from Token (paintBackground()) here,
// but don't because I'm just too lazy.
if (host.getEOLMarkersVisible()) {
g.setColor(host.getForegroundForTokenType(Token.WHITESPACE));
g.setFont(host.getFontForTokenType(Token.WHITESPACE));
g.drawString("\u00B6", x, y - fontHeight);
}
}
/**
* Draws the passed-in text using syntax highlighting for the current language. Tokens are checked
* for being in a selected region, and are rendered appropriately if they are.
*
* @param painter The painter to render the tokens.
* @param token The list of tokens to draw.
* @param g The graphics context in which to draw.
* @param x The x-coordinate at which to draw.
* @param y The y-coordinate at which to draw.
* @param selStart The start of the selection.
* @param selEnd The end of the selection.
* @return The x-coordinate representing the end of the painted text.
*/
private float drawLineWithSelection(
TokenPainter painter, Token token, Graphics2D g, float x, float y, int selStart, int selEnd) {
float nextX = x; // The x-value at the end of our text.
boolean useSTC = host.getUseSelectedTextColor();
while (token != null && token.isPaintable() && nextX < clipEnd) {
// Selection starts in this token
if (token.containsPosition(selStart)) {
if (selStart > token.getOffset()) {
tempToken.copyFrom(token);
tempToken.textCount = selStart - tempToken.getOffset();
nextX = painter.paint(tempToken, g, nextX, y, host, this, clipStart);
tempToken.textCount = token.length();
tempToken.makeStartAt(selStart);
// Clone required since token and tempToken must be
// different tokens for else statement below
token = new TokenImpl(tempToken);
}
int tokenLen = token.length();
int selCount = Math.min(tokenLen, selEnd - token.getOffset());
if (selCount == tokenLen) {
nextX = painter.paintSelected(token, g, nextX, y, host, this, clipStart, useSTC);
} else {
tempToken.copyFrom(token);
tempToken.textCount = selCount;
nextX = painter.paintSelected(tempToken, g, nextX, y, host, this, clipStart, useSTC);
tempToken.textCount = token.length();
tempToken.makeStartAt(token.getOffset() + selCount);
token = tempToken;
nextX = painter.paint(token, g, nextX, y, host, this, clipStart);
}
}
// Selection ends in this token
else if (token.containsPosition(selEnd)) {
tempToken.copyFrom(token);
tempToken.textCount = selEnd - tempToken.getOffset();
nextX = painter.paintSelected(tempToken, g, nextX, y, host, this, clipStart, useSTC);
tempToken.textCount = token.length();
tempToken.makeStartAt(selEnd);
token = tempToken;
nextX = painter.paint(token, g, nextX, y, host, this, clipStart);
}
// This token is entirely selected
else if (token.getOffset() >= selStart && token.getEndOffset() <= selEnd) {
nextX = painter.paintSelected(token, g, nextX, y, host, this, clipStart, useSTC);
}
// This token is entirely unselected
else {
nextX = painter.paint(token, g, nextX, y, host, this, clipStart);
}
token = token.getNextToken();
}
// NOTE: We should re-use code from Token (paintBackground()) here,
// but don't because I'm just too lazy.
if (host.getEOLMarkersVisible()) {
g.setColor(host.getForegroundForTokenType(Token.WHITESPACE));
g.setFont(host.getFontForTokenType(Token.WHITESPACE));
g.drawString("\u00B6", nextX, y);
}
// Return the x-coordinate at the end of the painted text.
return nextX;
}
/** {@inheritDoc} */
public void markOccurrences(
RSyntaxDocument doc,
Token t,
RSyntaxTextAreaHighlighter h,
MarkOccurrencesHighlightPainter p) {
char[] lexeme = t.getLexeme().toCharArray();
int tokenOffs = t.getOffset();
Element root = doc.getDefaultRootElement();
int lineCount = root.getElementCount();
int curLine = root.getElementIndex(t.getOffset());
// For now, we only check for tags on the current line, for
// simplicity. Tags spanning multiple lines aren't common anyway.
boolean found = false;
boolean forward = true;
t = doc.getTokenListForLine(curLine);
while (t != null && t.isPaintable()) {
if (t.getType() == Token.MARKUP_TAG_DELIMITER) {
if (t.isSingleChar('<') && t.getOffset() + 1 == tokenOffs) {
found = true;
break;
} else if (t.is(CLOSE_TAG_START) && t.getOffset() + 2 == tokenOffs) {
found = true;
forward = false;
break;
}
}
t = t.getNextToken();
}
if (!found) {
return;
}
if (forward) {
int depth = 0;
t = t.getNextToken().getNextToken();
do {
while (t != null && t.isPaintable()) {
if (t.getType() == Token.MARKUP_TAG_DELIMITER) {
if (t.isSingleChar('<')) {
depth++;
} else if (t.is(TAG_SELF_CLOSE)) {
if (depth > 0) {
depth--;
} else {
return; // No match for this tag
}
} else if (t.is(CLOSE_TAG_START)) {
if (depth > 0) {
depth--;
} else {
Token match = t.getNextToken();
if (match != null && match.is(lexeme)) {
try {
int end = match.getOffset() + match.length();
h.addMarkedOccurrenceHighlight(match.getOffset(), end, p);
end = tokenOffs + match.length();
h.addMarkedOccurrenceHighlight(tokenOffs, end, p);
} catch (BadLocationException ble) {
ble.printStackTrace(); // Never happens
}
}
return; // We're done!
}
}
}
t = t.getNextToken();
}
if (++curLine < lineCount) {
t = doc.getTokenListForLine(curLine);
}
} while (curLine < lineCount);
} else { // !forward
Stack<Token> matches = new Stack<Token>();
boolean inPossibleMatch = false;
t = doc.getTokenListForLine(curLine);
final int endBefore = tokenOffs - 2; // Stop before "</".
do {
while (t != null && t.getOffset() < endBefore && t.isPaintable()) {
if (t.getType() == Token.MARKUP_TAG_DELIMITER) {
if (t.isSingleChar('<')) {
Token next = t.getNextToken();
if (next != null) {
if (next.is(lexeme)) {
matches.push(next);
inPossibleMatch = true;
} else {
inPossibleMatch = false;
}
t = next;
}
} else if (t.isSingleChar('>')) {
inPossibleMatch = false;
} else if (inPossibleMatch && t.is(TAG_SELF_CLOSE)) {
matches.pop();
} else if (t.is(CLOSE_TAG_START)) {
Token next = t.getNextToken();
if (next != null) {
// Invalid XML might not have a match
if (next.is(lexeme) && !matches.isEmpty()) {
matches.pop();
}
t = next;
}
}
}
t = t.getNextToken();
}
if (!matches.isEmpty()) {
try {
Token match = matches.pop();
int end = match.getOffset() + match.length();
h.addMarkedOccurrenceHighlight(match.getOffset(), end, p);
end = tokenOffs + match.length();
h.addMarkedOccurrenceHighlight(tokenOffs, end, p);
} catch (BadLocationException ble) {
ble.printStackTrace(); // Never happens
}
return;
}
if (--curLine >= 0) {
t = doc.getTokenListForLine(curLine);
}
} while (curLine >= 0);
}
}
