/**
* Determine the fitness of the given Chromosome instance. The higher the return value, the more
* fit the instance. This method should always return the same fitness value for two equivalent
* Chromosome instances.
*
* @param a_subject the Chromosome instance to evaluate
* @return positive double reflecting the fitness rating of the given Chromosome
* @since 2.0 (until 1.1: return type int)
* @author Neil Rotstan, Klaus Meffert, John Serri
*/
public double evaluate(IChromosome a_subject) {
int i = 0, j, k;
for (j = 0; j < EvolvingSubsumptionForRobocode.numberOfEvents; j++) {
eventPriority[j] = ((Integer) a_subject.getGene(i++).getAllele()).intValue();
}
for (j = 0; j < EvolvingSubsumptionForRobocode.numberOfBehaviours; j++) {
behaviourOverwrite[j] = ((Integer) a_subject.getGene(i++).getAllele()).intValue() > 50;
}
for (j = 0; j < EvolvingSubsumptionForRobocode.numberOfBehaviours; j++) {
for (k = 0; k < EvolvingSubsumptionForRobocode.behaviourSize; k++) {
behaviourActions[j][k] = ((Integer) a_subject.getGene(i++).getAllele()).intValue();
}
}
double tempFitness;
double fitness = 0;
for (j = 0; j < otherRobots.length; j++) {
RobotSpecification[] tempRobots = new RobotSpecification[2];
tempRobots[0] = evolvable;
tempRobots[1] = otherRobots[j];
battleSpecs = new BattleSpecification(1, new BattlefieldSpecification(800, 600), tempRobots);
tempFitness = 0;
System.out.println("Testing against " + otherRobots[j].getName() + "...");
for (i = 0; i < EvolvingSubsumptionForRobocode.numberOfBattles; i++) {
engine.runBattle(battleSpecs, true);
tempFitness += battleObserver.getScoreRobot() / 500;
}
tempFitness /= EvolvingSubsumptionForRobocode.numberOfBattles;
fitness += tempFitness;
}
fitness /= otherRobots.length;
return Math.min(1.0d, fitness);
}
/**
* Write report on eveluation to the given stream.
*
* @param a_fitnessFunction p_SupergeneChangeFitnessFunction
* @param a_population Genotype
* @return Chromosome
*/
public IChromosome report(
SupergeneChangeFitnessFunction a_fitnessFunction, Genotype a_population) {
IChromosome bestSolutionSoFar = a_population.getFittestChromosome();
if (!REPORT_ENABLED) {
return bestSolutionSoFar;
}
System.out.println(
"\nThe best solution has a fitness value of " + bestSolutionSoFar.getFitnessValue());
System.out.println("It contained the following: ");
System.out.println(
"\t"
+ a_fitnessFunction.getNumberOfCoinsAtGene(bestSolutionSoFar, QUARTERS)
+ " quarters.");
System.out.println(
"\t" + a_fitnessFunction.getNumberOfCoinsAtGene(bestSolutionSoFar, DIMES) + " dimes.");
System.out.println(
"\t" + a_fitnessFunction.getNumberOfCoinsAtGene(bestSolutionSoFar, NICKELS) + " nickels.");
System.out.println(
"\t" + a_fitnessFunction.getNumberOfCoinsAtGene(bestSolutionSoFar, PENNIES) + " pennies.");
System.out.println(
"For a total of "
+ a_fitnessFunction.amountOfChange(bestSolutionSoFar)
+ " cents in "
+ a_fitnessFunction.getTotalNumberOfCoins(bestSolutionSoFar)
+ " coins.");
return bestSolutionSoFar;
}
protected void updateChromosomes(Population a_pop, Configuration a_conf) {
int currentPopSize = a_pop.size();
// Ensure all chromosomes are updated.
// -----------------------------------
BulkFitnessFunction bulkFunction = a_conf.getBulkFitnessFunction();
boolean bulkFitFunc = (bulkFunction != null);
if (!bulkFitFunc) {
for (int i = 0; i < currentPopSize; i++) {
IChromosome chrom = a_pop.getChromosome(i);
chrom.getFitnessValue();
}
}
}
/**
* Returns the total number of coins represented by all of the genes in the given potential
* solution.
*
* @param a_potentialsolution the potential solution to evaluate
* @return total number of coins represented by the given Chromosome
* @author Neil Rotstan
* @since 1.0
*/
public static int getTotalNumberOfCoins(IChromosome a_potentialsolution) {
int totalCoins = 0;
int numberOfGenes = a_potentialsolution.size();
for (int i = 0; i < numberOfGenes; i++) {
totalCoins += getNumberOfCoinsAtGene(a_potentialsolution, i);
}
return totalCoins;
}
/**
* Marshall a Chromosome instance to an XML Element representation, including its contained Genes
* as sub-elements. This may be useful in scenarios where representation as an entire Document is
* undesirable, such as when the representation of this Chromosome is to be combined with other
* elements in a single Document.
*
* @param a_subject the chromosome to represent as an XML element
* @param a_xmlDocument a Document instance that will be used to create the Element instance. Note
* that the element will NOT be added to the document by this method
* @return an Element object representing the given Chromosome
* @author Neil Rotstan
* @since 1.0
* @deprecated use XMLDocumentBuilder instead
*/
public static Element representChromosomeAsElement(
final IChromosome a_subject, final Document a_xmlDocument) {
// Start by creating an element for the chromosome and its size
// attribute, which represents the number of genes in the chromosome.
// ------------------------------------------------------------------
Element chromosomeElement = a_xmlDocument.createElement(CHROMOSOME_TAG);
chromosomeElement.setAttribute(SIZE_ATTRIBUTE, Integer.toString(a_subject.size()));
// Next create the genes element with its nested gene elements,
// which will contain string representations of the alleles.
// --------------------------------------------------------------
Element genesElement = representGenesAsElement(a_subject.getGenes(), a_xmlDocument);
// Add the new genes element to the chromosome element and then
// return the chromosome element.
// -------------------------------------------------------------
chromosomeElement.appendChild(genesElement);
return chromosomeElement;
}
/**
* Operate on the given chromosome with the given mutation rate.
*
* @param a_chrom chromosome to operate
* @param a_rate mutation rate
* @param a_generator random generator to use (must not be null)
* @return mutated chromosome of null if no mutation has occured.
* @author Audrius Meskauskas
* @author Florian Hafner
* @since 3.3.2
*/
protected IChromosome operate(
final IChromosome a_chrom, final int a_rate, final RandomGenerator a_generator) {
IChromosome chromosome = null;
// ----------------------------------------
for (int j = m_startOffset; j < a_chrom.size(); j++) {
// Ensure probability of 1/currentRate for applying mutation.
// ----------------------------------------------------------
if (a_generator.nextInt(a_rate) == 0) {
if (chromosome == null) {
chromosome = (IChromosome) a_chrom.clone();
// In case monitoring is active, support it.
// -----------------------------------------
if (m_monitorActive) {
chromosome.setUniqueIDTemplate(a_chrom.getUniqueID(), 1);
}
}
Gene[] genes = chromosome.getGenes();
if (m_range == 0) {
m_range = genes.length;
}
Gene[] mutated = operate(a_generator, j, genes);
// setGenes is not required for this operator, but it may
// be needed for the derived operators.
// ------------------------------------------------------
try {
chromosome.setGenes(mutated);
} catch (InvalidConfigurationException cex) {
throw new Error("Gene type not allowed by constraint checker", cex);
}
}
}
return chromosome;
}
/**
* Determine the fitness of the given Chromosome instance. The higher the return value, the more
* fit the instance. This method should always return the same fitness value for two equivalent
* Chromosome instances.
*
* @param a_subject the Chromosome instance to evaluate
* @return positive double reflecting the fitness rating of the given Chromosome
* @since 2.0 (until 1.1: return type int)
* @author Neil Rotstan, Klaus Meffert, John Serri
*/
public double evaluate(IChromosome a_subject) {
// Take care of the fitness evaluator. It could either be weighting higher
// fitness values higher (e.g.DefaultFitnessEvaluator). Or it could weight
// lower fitness values higher, because the fitness value is seen as a
// defect rate (e.g. DeltaFitnessEvaluator)
boolean defaultComparation = a_subject.getConfiguration().getFitnessEvaluator().isFitter(2, 1);
// The fitness value measures both how close the value is to the
// target amount supplied by the user and the total number of coins
// represented by the solution. We do this in two steps: first,
// we consider only the represented amount of change vs. the target
// amount of change and return higher fitness values for amounts
// closer to the target, and lower fitness values for amounts further
// away from the target. Then we go to step 2, which returns a higher
// fitness value for solutions representing fewer total coins, and
// lower fitness values for solutions representing more total coins.
// ------------------------------------------------------------------
int changeAmount = amountOfChange(a_subject);
int totalCoins = getTotalNumberOfCoins(a_subject);
int changeDifference = Math.abs(m_targetAmount - changeAmount);
double fitness;
if (defaultComparation) {
fitness = 0.0d;
} else {
fitness = MAX_BOUND / 2;
}
// Step 1: Determine distance of amount represented by solution from
// the target amount. If the change difference is greater than zero we
// will divide one by the difference in change between the
// solution amount and the target amount. That will give the desired
// effect of returning higher values for amounts closer to the target
// amount and lower values for amounts further away from the target
// amount.
// In the case where the change difference is zero it means that we have
// the correct amount and we assign a higher fitness value.
// ---------------------------------------------------------------------
if (defaultComparation) {
fitness += changeDifferenceBonus(MAX_BOUND / 2, changeDifference);
} else {
fitness -= changeDifferenceBonus(MAX_BOUND / 2, changeDifference);
}
// Step 2: We divide the fitness value by a penalty based on the number of
// coins. The higher the number of coins the higher the penalty and the
// smaller the fitness value.
// And inversely the smaller number of coins in the solution the higher
// the resulting fitness value.
// -----------------------------------------------------------------------
if (defaultComparation) {
fitness -= computeCoinNumberPenalty(MAX_BOUND / 2, totalCoins);
} else {
fitness += computeCoinNumberPenalty(MAX_BOUND / 2, totalCoins);
}
// Make sure fitness value is always positive.
// -------------------------------------------
return Math.max(1.0d, fitness);
}
boolean checkAlleles(IChromosome chrom, int j, int nextInt) {
Gene[] newgene = chrom.getGenes();
Integer[] alleles = new Integer[j];
for (int i = 0; i < j; i++) {
alleles[i] = (Integer) newgene[i].getAllele();
}
if (Arrays.asList(alleles).contains(new Integer(nextInt))) {
return true;
}
return false;
}
/**
* Convenience method that returns a new Chromosome instance with its genes values (alleles)
* randomized. Note that, if possible, this method will acquire a Chromosome instance from the
* active ChromosomePool (if any) and then randomize its gene values before returning it. If a
* Chromosome cannot be acquired from the pool, then a new instance will be constructed and its
* gene values randomized before returning it.
*
* @param a_configuration the configuration to use
* @return randomly initialized Chromosome
* @throws InvalidConfigurationException if the given Configuration instance is invalid
* @throws IllegalArgumentException if the given Configuration instance is null
* @author Neil Rotstan
* @author Klaus Meffert
* @since 1.0
*/
public static IChromosome randomInitialChromosome(Configuration a_configuration)
throws InvalidConfigurationException {
// Sanity check: make sure the given configuration isn't null.
// -----------------------------------------------------------
if (a_configuration == null) {
throw new IllegalArgumentException("Configuration instance must not be null");
}
// Lock the configuration settings so that they can't be changed
// from now on.
// -------------------------------------------------------------
a_configuration.lockSettings();
// First see if we can get a Chromosome instance from the pool.
// If we can, we'll randomize its gene values (alleles) and then
// return it.
// -------------------------------------------------------------
IChromosomePool pool = a_configuration.getChromosomePool();
if (pool != null) {
IChromosome randomChromosome = pool.acquireChromosome();
if (randomChromosome != null) {
Gene[] genes = randomChromosome.getGenes();
RandomGenerator generator = a_configuration.getRandomGenerator();
for (int i = 0; i < genes.length; i++) {
genes[i].setToRandomValue(generator);
/** @todo what about Gene's energy? */
}
randomChromosome.setFitnessValueDirectly(FitnessFunction.NO_FITNESS_VALUE);
return randomChromosome;
}
}
// We weren't able to get a Chromosome from the pool, so we have to
// construct a new instance and build it from scratch.
// ------------------------------------------------------------------
IChromosome sampleChromosome = a_configuration.getSampleChromosome();
sampleChromosome.setFitnessValue(FitnessFunction.NO_FITNESS_VALUE);
Gene[] sampleGenes = sampleChromosome.getGenes();
Gene[] newGenes = new Gene[sampleGenes.length];
RandomGenerator generator = a_configuration.getRandomGenerator();
for (int i = 0; i < newGenes.length; i++) {
// We use the newGene() method on each of the genes in the
// sample Chromosome to generate our new Gene instances for
// the Chromosome we're returning. This guarantees that the
// new Genes are setup with all of the correct internal state
// for the respective gene position they're going to inhabit.
// -----------------------------------------------------------
newGenes[i] = sampleGenes[i].newGene();
// Set the gene's value (allele) to a random value.
// ------------------------------------------------
newGenes[i].setToRandomValue(generator);
/** @todo what about Gene's energy? */
}
// Finally, construct the new chromosome with the new random
// genes values and return it.
// ---------------------------------------------------------
return new Chromosome(a_configuration, newGenes);
}
/**
* Executes the genetic algorithm to determine the minimum number of items necessary to make up
* the given target volume. The solution will then be written to the console.
*
* @param a_knapsackVolume the target volume for which this method is attempting to produce the
* optimal list of items
* @throws Exception
* @author Klaus Meffert
* @since 2.3
*/
public static void findItemsForVolume(double a_knapsackVolume) throws Exception {
// Start with a DefaultConfiguration, which comes setup with the
// most common settings.
// -------------------------------------------------------------
Configuration conf = new DefaultConfiguration();
conf.setPreservFittestIndividual(true);
// Set the fitness function we want to use. We construct it with
// the target volume passed in to this method.
// ---------------------------------------------------------
FitnessFunction myFunc = new KnapsackFitnessFunction(a_knapsackVolume);
conf.setFitnessFunction(myFunc);
// Now we need to tell the Configuration object how we want our
// Chromosomes to be setup. We do that by actually creating a
// sample Chromosome and then setting it on the Configuration
// object. As mentioned earlier, we want our Chromosomes to each
// have as many genes as there are different items available. We want the
// values (alleles) of those genes to be integers, which represent
// how many items of that type we have. We therefore use the
// IntegerGene class to represent each of the genes. That class
// also lets us specify a lower and upper bound, which we set
// to senseful values (i.e. maximum possible) for each item type.
// --------------------------------------------------------------
Gene[] sampleGenes = new Gene[itemVolumes.length];
for (int i = 0; i < itemVolumes.length; i++) {
sampleGenes[i] = new IntegerGene(conf, 0, (int) Math.ceil(a_knapsackVolume / itemVolumes[i]));
}
IChromosome sampleChromosome = new Chromosome(conf, sampleGenes);
conf.setSampleChromosome(sampleChromosome);
// Finally, we need to tell the Configuration object how many
// Chromosomes we want in our population. The more Chromosomes,
// the larger number of potential solutions (which is good for
// finding the answer), but the longer it will take to evolve
// the population (which could be seen as bad).
// ------------------------------------------------------------
conf.setPopulationSize(50);
// Create random initial population of Chromosomes.
// Here we try to read in a previous run via XMLManager.readFile(..)
// for demonstration purpose!
// -----------------------------------------------------------------
Genotype population;
try {
Document doc = XMLManager.readFile(new File("knapsackJGAP.xml"));
population = XMLManager.getGenotypeFromDocument(conf, doc);
} catch (FileNotFoundException fex) {
population = Genotype.randomInitialGenotype(conf);
}
population = Genotype.randomInitialGenotype(conf);
// Evolve the population. Since we don't know what the best answer
// is going to be, we just evolve the max number of times.
// ---------------------------------------------------------------
for (int i = 0; i < MAX_ALLOWED_EVOLUTIONS; i++) {
population.evolve();
}
// Save progress to file. A new run of this example will then be able to
// resume where it stopped before!
// ---------------------------------------------------------------------
// represent Genotype as tree with elements Chromomes and Genes
// ------------------------------------------------------------
DataTreeBuilder builder = DataTreeBuilder.getInstance();
IDataCreators doc2 = builder.representGenotypeAsDocument(population);
// create XML document from generated tree
// ---------------------------------------
XMLDocumentBuilder docbuilder = new XMLDocumentBuilder();
Document xmlDoc = (Document) docbuilder.buildDocument(doc2);
XMLManager.writeFile(xmlDoc, new File("knapsackJGAP.xml"));
// Display the best solution we found.
// -----------------------------------
IChromosome bestSolutionSoFar = population.getFittestChromosome();
System.out.println(
"The best solution has a fitness value of " + bestSolutionSoFar.getFitnessValue());
System.out.println("It contained the following: ");
int count;
double totalVolume = 0.0d;
for (int i = 0; i < bestSolutionSoFar.size(); i++) {
count = ((Integer) bestSolutionSoFar.getGene(i).getAllele()).intValue();
if (count > 0) {
System.out.println("\t " + count + " x " + itemNames[i]);
totalVolume += itemVolumes[i] * count;
}
}
System.out.println("\nFor a total volume of " + totalVolume + " ccm");
System.out.println("Expected volume was " + a_knapsackVolume + " ccm");
System.out.println("Volume difference is " + Math.abs(totalVolume - a_knapsackVolume) + " ccm");
}
public void operate(final Population a_population, final List a_candidateChromosomes) {
// Work out the number of crossovers that should be performed.
// -----------------------------------------------------------
int m_crossoverRate = getCrossOverRate();
double m_crossoverRatePercent = getCrossOverRatePercent();
int size = Math.min(getConfiguration().getPopulationSize(), a_population.size());
int numCrossovers = 0;
if (m_crossoverRate >= 0) {
numCrossovers = size / m_crossoverRate;
} else if (m_crossoverRateCalc != null) {
numCrossovers = size / 6;
} else {
numCrossovers = (int) (size * m_crossoverRatePercent);
}
RandomGenerator generator = getConfiguration().getRandomGenerator();
IGeneticOperatorConstraint constraint =
getConfiguration().getJGAPFactory().getGeneticOperatorConstraint();
// For each crossover, grab two random chromosomes, pick a random
// locus (gene location), and then swap that gene and all genes
// to the "right" (those with greater loci) of that gene between
// the two chromosomes.
// --------------------------------------------------------------
int index1, index2;
crossoverValues = new int[size];
for (int i = 0; i < size; i++) {
crossoverValues[i] = 0;
}
List<Integer> chromeSel = new ArrayList<Integer>();
for (int i = 0; i < size; i++) {
if (m_crossoverRateCalc != null) {
CrossoverRateCalculator ccalc = (CrossoverRateCalculator) m_crossoverRateCalc;
ccalc.setCurrentFitness(a_population.getChromosome(i).getFitnessValue());
int numbers = ccalc.calculateCurrentRate();
crossoverValues[i] = numbers;
while (numbers > 0) {
chromeSel.add(i);
numbers--;
}
}
}
int justtocheck = chromeSel.size();
if (m_crossoverRateCalc != null) {
if (justtocheck == 0) {
System.out.println("Exception Caught.. Crossover.. chromesel array is null!!");
for (int fix = 0; fix <= size - 2; fix++) {
chromeSel.add(fix);
}
}
}
//
for (int i = 0; i < numCrossovers; i++) {
IChromosome chrom1;
IChromosome chrom2;
if (m_crossoverRateCalc != null) {
index1 = generator.nextInt(chromeSel.size());
index2 = generator.nextInt(chromeSel.size());
chrom1 = a_population.getChromosome(chromeSel.get(index1));
chrom2 = a_population.getChromosome(chromeSel.get(index2));
} else {
index1 = generator.nextInt(size);
index2 = generator.nextInt(size);
chrom1 = a_population.getChromosome(index1);
chrom2 = a_population.getChromosome(index2);
}
// Verify that crossover is allowed.
// ---------------------------------
if (!isXoverNewAge() && chrom1.getAge() < 1 && chrom2.getAge() < 1) {
// Crossing over two newly created chromosomes is not seen as helpful
// here.
// ------------------------------------------------------------------
continue;
}
if (constraint != null) {
List v = new Vector();
v.add(chrom1);
v.add(chrom2);
if (!constraint.isValid(a_population, v, this)) {
// Constraint forbids crossing over.
// ---------------------------------
continue;
}
}
// Clone the chromosomes.
// ----------------------
IChromosome firstMate = (IChromosome) ((ICloneable) chrom1).clone();
IChromosome secondMate = (IChromosome) ((ICloneable) chrom2).clone();
// Cross over the chromosomes.
// ---------------------------
doCrossover(firstMate, secondMate, a_candidateChromosomes, generator);
}
}
/**
* Executes the genetic algorithm to determine the minimum number of coins necessary to make up
* the given target amount of change. The solution will then be written to System.out.
*
* @param a_targetChangeAmount the target amount of change for which this method is attempting to
* produce the minimum number of coins
* @param a_doMonitor true: turn on monitoring for later evaluation of evolution progress
* @throws Exception
* @author Neil Rotstan
* @author Klaus Meffert
* @since 1.0
*/
public static void makeChangeForAmount(int a_targetChangeAmount, boolean a_doMonitor)
throws Exception {
// Start with a DefaultConfiguration, which comes setup with the
// most common settings.
// -------------------------------------------------------------
Configuration conf = new DefaultConfiguration();
// Care that the fittest individual of the current population is
// always taken to the next generation.
// Consider: With that, the pop. size may exceed its original
// size by one sometimes!
// -------------------------------------------------------------
conf.setPreservFittestIndividual(true);
conf.setKeepPopulationSizeConstant(false);
// Set the fitness function we want to use, which is our
// MinimizingMakeChangeFitnessFunction. We construct it with
// the target amount of change passed in to this method.
// ---------------------------------------------------------
FitnessFunction myFunc = new SampleFitnessFunction(a_targetChangeAmount);
conf.setFitnessFunction(myFunc);
if (a_doMonitor) {
// Turn on monitoring/auditing of evolution progress.
// --------------------------------------------------
m_monitor = new EvolutionMonitor();
conf.setMonitor(m_monitor);
}
// Now we need to tell the Configuration object how we want our
// Chromosomes to be setup. We do that by actually creating a
// sample Chromosome and then setting it on the Configuration
// object. As mentioned earlier, we want our Chromosomes to each
// have four genes, one for each of the coin types. We want the
// values (alleles) of those genes to be integers, which represent
// how many coins of that type we have. We therefore use the
// IntegerGene class to represent each of the genes. That class
// also lets us specify a lower and upper bound, which we set
// to sensible values for each coin type.
// --------------------------------------------------------------
Gene[] sampleGenes = new Gene[4];
sampleGenes[0] = new IntegerGene(conf, 0, 98); // Wasser
sampleGenes[1] = new IntegerGene(conf, 0, 98); // Zucker
sampleGenes[2] = new IntegerGene(conf, 0, 98); // Saft1
sampleGenes[3] = new IntegerGene(conf, 0, 98); // Saft2
IChromosome sampleChromosome = new Chromosome(conf, sampleGenes);
conf.setSampleChromosome(sampleChromosome);
// Finally, we need to tell the Configuration object how many
// Chromosomes we want in our population. The more Chromosomes,
// the larger number of potential solutions (which is good for
// finding the answer), but the longer it will take to evolve
// the population (which could be seen as bad).
// ------------------------------------------------------------
conf.setPopulationSize(80);
// Now we initialize the population randomly, anyway (as an example only)!
// If you want to load previous results from file, remove the next line!
// -----------------------------------------------------------------------
Genotype population = Genotype.randomInitialGenotype(conf);
// Evolve the population. Since we don't know what the best answer
// is going to be, we just evolve the max number of times.
// ---------------------------------------------------------------
long startTime = System.currentTimeMillis();
for (int i = 0; i < MAX_ALLOWED_EVOLUTIONS; i++) {
if (!uniqueChromosomes(population.getPopulation())) {
throw new RuntimeException("Invalid state in generation " + i);
}
if (m_monitor != null) {
population.evolve(m_monitor);
} else {
population.evolve();
}
}
long endTime = System.currentTimeMillis();
System.out.println("Total evolution time: " + (endTime - startTime) + " ms");
// Save progress to file. A new run of this example will then be able to
// resume where it stopped before! --> this is completely optional.
// ---------------------------------------------------------------------
// Display the best solution we found.
// -----------------------------------
IChromosome bestSolutionSoFar = population.getFittestChromosome();
double v1 = bestSolutionSoFar.getFitnessValue();
System.out.println(
"The best solution has a fitness value of " + bestSolutionSoFar.getFitnessValue());
bestSolutionSoFar.setFitnessValueDirectly(-1);
System.out.println("It contains the following: ");
System.out.println(
"\t" + SampleFitnessFunction.getNumberOfCoinsAtGene(bestSolutionSoFar, 0) + " ml water.");
System.out.println(
"\t" + SampleFitnessFunction.getNumberOfCoinsAtGene(bestSolutionSoFar, 1) + " ml sugar.");
System.out.println(
"\t" + SampleFitnessFunction.getNumberOfCoinsAtGene(bestSolutionSoFar, 2) + " ml juice 1.");
System.out.println(
"\t" + SampleFitnessFunction.getNumberOfCoinsAtGene(bestSolutionSoFar, 3) + " ml juice 2.");
System.out.println(
"For a total of " + SampleFitnessFunction.amountOfChange(bestSolutionSoFar) + " ml.");
}
/**
* Evolves the population of chromosomes within a genotype. This will execute all of the genetic
* operators added to the present active configuration and then invoke the natural selector to
* choose which chromosomes will be included in the next generation population.
*
* @param a_pop the population to evolve
* @param a_conf the configuration to use for evolution
* @return evolved population
* @author Klaus Meffert
* @since 3.2
*/
public Population evolve(Population a_pop, Configuration a_conf) {
Population pop = a_pop;
int originalPopSize = a_conf.getPopulationSize();
boolean monitorActive = a_conf.getMonitor() != null;
IChromosome fittest = null;
// If first generation: Set age to one to allow genetic operations,
// see CrossoverOperator for an illustration.
// ----------------------------------------------------------------
if (a_conf.getGenerationNr() == 0) {
int size = pop.size();
for (int i = 0; i < size; i++) {
IChromosome chrom = pop.getChromosome(i);
chrom.increaseAge();
}
} else {
// Select fittest chromosome in case it should be preserved and we are
// not in the very first generation.
// -------------------------------------------------------------------
if (a_conf.isPreserveFittestIndividual()) {
/** @todo utilize jobs. In pop do also utilize jobs, especially for fitness computation */
fittest = pop.determineFittestChromosome(0, pop.size() - 1);
}
}
if (a_conf.getGenerationNr() > 0) {
// Adjust population size to configured size (if wanted).
// Theoretically, this should be done at the end of this method.
// But for optimization issues it is not. If it is the last call to
// evolve() then the resulting population possibly contains more
// chromosomes than the wanted number. But this is no bad thing as
// more alternatives mean better chances having a fit candidate.
// If it is not the last call to evolve() then the next call will
// ensure the correct population size by calling keepPopSizeConstant.
// ------------------------------------------------------------------
keepPopSizeConstant(pop, a_conf);
}
// Ensure fitness value of all chromosomes is udpated.
// ---------------------------------------------------
if (monitorActive) {
// Monitor that fitness value of chromosomes is being updated.
// -----------------------------------------------------------
a_conf
.getMonitor()
.event(
IEvolutionMonitor.MONITOR_EVENT_BEFORE_UPDATE_CHROMOSOMES1,
a_conf.getGenerationNr(),
new Object[] {pop});
}
updateChromosomes(pop, a_conf);
if (monitorActive) {
// Monitor that fitness value of chromosomes is being updated.
// -----------------------------------------------------------
a_conf
.getMonitor()
.event(
IEvolutionMonitor.MONITOR_EVENT_AFTER_UPDATE_CHROMOSOMES1,
a_conf.getGenerationNr(),
new Object[] {pop});
}
// Apply certain NaturalSelectors before GeneticOperators will be executed.
// ------------------------------------------------------------------------
pop = applyNaturalSelectors(a_conf, pop, true);
// Execute all of the Genetic Operators.
// -------------------------------------
applyGeneticOperators(a_conf, pop);
// Reset fitness value of genetically operated chromosomes.
// Normally, this should not be necessary as the Chromosome class
// initializes each newly created chromosome with
// FitnessFunction.NO_FITNESS_VALUE. But who knows which Chromosome
// implementation is used...
// ----------------------------------------------------------------
int currentPopSize = pop.size();
for (int i = originalPopSize; i < currentPopSize; i++) {
IChromosome chrom = pop.getChromosome(i);
chrom.setFitnessValueDirectly(FitnessFunction.NO_FITNESS_VALUE);
// Mark chromosome as new-born.
// ----------------------------
chrom.resetAge();
// Mark chromosome as being operated on.
// -------------------------------------
chrom.increaseOperatedOn();
}
// Increase age of all chromosomes which are not modified by genetic
// operations.
// -----------------------------------------------------------------
int size = Math.min(originalPopSize, currentPopSize);
for (int i = 0; i < size; i++) {
IChromosome chrom = pop.getChromosome(i);
chrom.increaseAge();
// Mark chromosome as not being operated on.
// -----------------------------------------
chrom.resetOperatedOn();
}
// If a bulk fitness function has been provided, call it.
// ------------------------------------------------------
BulkFitnessFunction bulkFunction = a_conf.getBulkFitnessFunction();
if (bulkFunction != null) {
if (monitorActive) {
// Monitor that bulk fitness will be called for evaluation.
// --------------------------------------------------------
a_conf
.getMonitor()
.event(
IEvolutionMonitor.MONITOR_EVENT_BEFORE_BULK_EVAL,
a_conf.getGenerationNr(),
new Object[] {bulkFunction, pop});
}
/** @todo utilize jobs: bulk fitness function is not so important for a prototype! */
bulkFunction.evaluate(pop);
if (monitorActive) {
// Monitor that bulk fitness has been called for evaluation.
// ---------------------------------------------------------
a_conf
.getMonitor()
.event(
IEvolutionMonitor.MONITOR_EVENT_AFTER_BULK_EVAL,
a_conf.getGenerationNr(),
new Object[] {bulkFunction, pop});
}
}
// Ensure fitness value of all chromosomes is udpated.
// ---------------------------------------------------
if (monitorActive) {
// Monitor that fitness value of chromosomes is being updated.
// -----------------------------------------------------------
a_conf
.getMonitor()
.event(
IEvolutionMonitor.MONITOR_EVENT_BEFORE_UPDATE_CHROMOSOMES2,
a_conf.getGenerationNr(),
new Object[] {pop});
}
updateChromosomes(pop, a_conf);
if (monitorActive) {
// Monitor that fitness value of chromosomes is being updated.
// -----------------------------------------------------------
a_conf
.getMonitor()
.event(
IEvolutionMonitor.MONITOR_EVENT_AFTER_UPDATE_CHROMOSOMES2,
a_conf.getGenerationNr(),
new Object[] {pop});
}
// Apply certain NaturalSelectors after GeneticOperators have been applied.
// ------------------------------------------------------------------------
pop = applyNaturalSelectors(a_conf, pop, false);
// Fill up population randomly if size dropped below specified percentage
// of original size.
// ----------------------------------------------------------------------
if (a_conf.getMinimumPopSizePercent() > 0) {
int sizeWanted = a_conf.getPopulationSize();
int popSize;
int minSize = (int) Math.round(sizeWanted * (double) a_conf.getMinimumPopSizePercent() / 100);
popSize = pop.size();
if (popSize < minSize) {
IChromosome newChrom;
IChromosome sampleChrom = a_conf.getSampleChromosome();
Class sampleChromClass = sampleChrom.getClass();
IInitializer chromIniter =
a_conf.getJGAPFactory().getInitializerFor(sampleChrom, sampleChromClass);
while (pop.size() < minSize) {
try {
/**
* @todo utilize jobs as initialization may be time-consuming as invalid combinations
* may have to be filtered out
*/
newChrom = (IChromosome) chromIniter.perform(sampleChrom, sampleChromClass, null);
if (monitorActive) {
// Monitor that fitness value of chromosomes is being updated.
// -----------------------------------------------------------
a_conf
.getMonitor()
.event(
IEvolutionMonitor.MONITOR_EVENT_BEFORE_ADD_CHROMOSOME,
a_conf.getGenerationNr(),
new Object[] {pop, newChrom});
}
pop.addChromosome(newChrom);
} catch (Exception ex) {
throw new RuntimeException(ex);
}
}
}
}
IChromosome newFittest = reAddFittest(pop, fittest);
if (monitorActive && newFittest != null) {
// Monitor that fitness value of chromosomes is being updated.
// -----------------------------------------------------------
a_conf
.getMonitor()
.event(
IEvolutionMonitor.MONITOR_EVENT_READD_FITTEST,
a_conf.getGenerationNr(),
new Object[] {pop, fittest});
}
// Increase number of generations.
// -------------------------------
a_conf.incrementGenerationNr();
// Fire an event to indicate we've performed an evolution.
// -------------------------------------------------------
m_lastPop = pop;
m_lastConf = a_conf;
a_conf
.getEventManager()
.fireGeneticEvent(new GeneticEvent(GeneticEvent.GENOTYPE_EVOLVED_EVENT, this));
return pop;
}
/**
* Retrieves the number of coins represented by the given potential solution at the given gene
* position.
*
* @param a_potentialSolution the potential solution to evaluate
* @param a_position the gene position to evaluate
* @return the number of coins represented by the potential solution at the given gene position
* @author Neil Rotstan
* @since 1.0
*/
public static int getNumberOfCoinsAtGene(IChromosome a_potentialSolution, int a_position) {
Integer numCoins = (Integer) a_potentialSolution.getGene(a_position).getAllele();
return numCoins.intValue();
}
/**
* Returns a copy of this Chromosome. The returned instance can evolve independently of this
* instance. Note that, if possible, this method will first attempt to acquire a Chromosome
* instance from the active ChromosomePool (if any) and set its value appropriately before
* returning it. If that is not possible, then a new Chromosome instance will be constructed and
* its value set appropriately before returning.
*
* @return copy of this Chromosome
* @throws IllegalStateException instead of CloneNotSupportedException
* @author Neil Rotstan
* @author Klaus Meffert
* @since 1.0
*/
public synchronized Object clone() {
// Before doing anything, make sure that a Configuration object
// has been set on this Chromosome. If not, then throw an
// IllegalStateException.
// ------------------------------------------------------------
if (getConfiguration() == null) {
throw new IllegalStateException(
"The active Configuration object must be set on this "
+ "Chromosome prior to invocation of the clone() method.");
}
IChromosome copy = null;
// Now, first see if we can pull a Chromosome from the pool and just
// set its gene values (alleles) appropriately.
// ------------------------------------------------------------
IChromosomePool pool = getConfiguration().getChromosomePool();
if (pool != null) {
copy = pool.acquireChromosome();
if (copy != null) {
Gene[] genes = copy.getGenes();
for (int i = 0; i < size(); i++) {
genes[i].setAllele(getGene(i).getAllele());
}
}
}
try {
if (copy == null) {
// We couldn't fetch a Chromosome from the pool, so we need to create
// a new one. First we make a copy of each of the Genes. We explicity
// use the Gene at each respective gene location (locus) to create the
// new Gene that is to occupy that same locus in the new Chromosome.
// -------------------------------------------------------------------
int size = size();
if (size > 0) {
Gene[] copyOfGenes = new Gene[size];
for (int i = 0; i < copyOfGenes.length; i++) {
copyOfGenes[i] = getGene(i).newGene();
Object allele = getGene(i).getAllele();
if (allele != null) {
IJGAPFactory factory = getConfiguration().getJGAPFactory();
if (factory != null) {
ICloneHandler cloner = factory.getCloneHandlerFor(allele, allele.getClass());
if (cloner != null) {
try {
allele = cloner.perform(allele, null, this);
} catch (Exception ex) {
throw new RuntimeException(ex);
}
}
}
}
copyOfGenes[i].setAllele(allele);
}
// Now construct a new Chromosome with the copies of the genes and
// return it. Also clone the IApplicationData object later on.
// ---------------------------------------------------------------
if (getClass() == Chromosome.class) {
copy = new Chromosome(getConfiguration(), copyOfGenes);
} else {
copy = (IChromosome) getConfiguration().getSampleChromosome().clone();
copy.setGenes(copyOfGenes);
}
} else {
if (getClass() == Chromosome.class) {
copy = new Chromosome(getConfiguration());
} else {
copy = (IChromosome) getConfiguration().getSampleChromosome().clone();
}
}
}
copy.setFitnessValue(m_fitnessValue);
// Clone constraint checker.
// -------------------------
copy.setConstraintChecker(getConstraintChecker());
} catch (InvalidConfigurationException iex) {
throw new IllegalStateException(iex.getMessage());
}
// Also clone the IApplicationData object.
// ---------------------------------------
try {
copy.setApplicationData(cloneObject(getApplicationData()));
} catch (Exception ex) {
throw new IllegalStateException(ex.getMessage());
}
// Clone multi-objective object if necessary and possible.
// -------------------------------------------------------
if (m_multiObjective != null) {
if (getClass() == Chromosome.class) {
try {
((Chromosome) copy).setMultiObjectives((List) cloneObject(m_multiObjective));
} catch (Exception ex) {
throw new IllegalStateException(ex.getMessage());
}
}
}
return copy;
}
protected void doCrossover(
IChromosome firstMate,
IChromosome secondMate,
List a_candidateChromosomes,
RandomGenerator generator) {
Gene[] firstGenes = firstMate.getGenes();
Gene[] secondGenes = secondMate.getGenes();
int locus = generator.nextInt(firstGenes.length);
// Swap the genes.
// ---------------
Gene gene1, gene11;
Gene gene2, gene22;
Integer firstAllele, firstAllele1;
Integer secondAllele, secondAllele1;
for (int j = locus; j < firstGenes.length; j++) {
gene1 = firstGenes[j];
gene2 = secondGenes[j];
firstAllele = (Integer) gene1.getAllele();
secondAllele = (Integer) gene2.getAllele();
if (payload[firstAllele] != null && payload[secondAllele] != null) {
if (!checkAlleles(firstMate, j, secondAllele)) gene1.setAllele(secondAllele);
if (!checkAlleles(secondMate, j, firstAllele)) gene2.setAllele(firstAllele);
}
if (payload[firstAllele] == null && payload[secondAllele] == null) {
if (payload[64 + firstAllele].getPair() != payload[64 + secondAllele].getPair()) continue;
if (payload[64 + firstAllele].getPair() == 1) {
if (!checkAlleles(firstMate, j, secondAllele)
&& !checkAlleles(secondMate, j, firstAllele)) {
if (chkonepair(j) || chktwopair(j + 1)) {
System.out.println("Crossover.. something wrong");
}
gene11 = firstGenes[j + 1];
firstAllele1 = (Integer) gene11.getAllele();
gene22 = secondGenes[j + 1];
secondAllele1 = (Integer) gene22.getAllele();
if (!checkAlleles(firstMate, j + 1, secondAllele1)) {
gene1.setAllele(secondAllele);
gene11.setAllele(secondAllele1);
}
if (!checkAlleles(secondMate, j + 1, firstAllele1)) {
gene2.setAllele(firstAllele);
gene22.setAllele(firstAllele1);
}
}
} else if (payload[64 + firstAllele].getPair() == 2) {
if (!checkAlleles(firstMate, j, secondAllele)
&& !checkAlleles(secondMate, j, firstAllele)) {
gene11 = firstGenes[j - 1];
firstAllele1 = (Integer) gene11.getAllele();
gene22 = secondGenes[j - 1];
secondAllele1 = (Integer) gene22.getAllele();
if (!checkAlleles(firstMate, j - 1, secondAllele1)) {
gene1.setAllele(secondAllele);
gene11.setAllele(secondAllele1);
}
if (!checkAlleles(secondMate, j - 1, firstAllele1)) {
gene2.setAllele(firstAllele);
gene22.setAllele(firstAllele1);
}
}
} else {
System.out.println("...Invalid Configuration Exception...");
}
}
}
// Add the modified chromosomes to the candidate pool so that
// they'll be considered for natural selection during the next
// phase of evolution.
// -----------------------------------------------------------
a_candidateChromosomes.add(firstMate);
a_candidateChromosomes.add(secondMate);
}
/**
* Compares the given Chromosome to this Chromosome. This chromosome is considered to be "less
* than" the given chromosome if it has a fewer number of genes or if any of its gene values
* (alleles) are less than their corresponding gene values in the other chromosome.
*
* @param other the Chromosome against which to compare this chromosome
* @return a negative number if this chromosome is "less than" the given chromosome, zero if they
* are equal to each other, and a positive number if this chromosome is "greater than" the
* given chromosome
* @author Neil Rotstan
* @author Klaus Meffert
* @since 1.0
*/
public int compareTo(Object other) {
// First, if the other Chromosome is null, then this chromosome is
// automatically the "greater" Chromosome.
// ---------------------------------------------------------------
if (other == null) {
return 1;
}
int size = size();
IChromosome otherChromosome = (IChromosome) other;
Gene[] otherGenes = otherChromosome.getGenes();
// If the other Chromosome doesn't have the same number of genes,
// then whichever has more is the "greater" Chromosome.
// --------------------------------------------------------------
if (otherChromosome.size() != size) {
return size() - otherChromosome.size();
}
// Next, compare the gene values (alleles) for differences. If
// one of the genes is not equal, then we return the result of its
// comparison.
// ---------------------------------------------------------------
for (int i = 0; i < size; i++) {
int comparison = getGene(i).compareTo(otherGenes[i]);
if (comparison != 0) {
return comparison;
}
}
// Compare current fitness value.
// ------------------------------
if (m_fitnessValue != otherChromosome.getFitnessValueDirectly()) {
FitnessEvaluator eval = getConfiguration().getFitnessEvaluator();
if (eval != null) {
if (eval.isFitter(m_fitnessValue, otherChromosome.getFitnessValueDirectly())) {
return 1;
} else {
return -1;
}
} else {
// undetermined order, but unequal!
// --------------------------------
return -1;
}
}
if (m_compareAppData) {
// Compare application data.
// -------------------------
if (getApplicationData() == null) {
if (otherChromosome.getApplicationData() != null) {
return -1;
}
} else if (otherChromosome.getApplicationData() == null) {
return 1;
} else {
if (getApplicationData() instanceof Comparable) {
try {
return ((Comparable) getApplicationData())
.compareTo(otherChromosome.getApplicationData());
} catch (ClassCastException cex) {
/** @todo improve */
return -1;
}
} else {
return getApplicationData()
.getClass()
.getName()
.compareTo(otherChromosome.getApplicationData().getClass().getName());
}
}
}
// Everything is equal. Return zero.
// ---------------------------------
return 0;
}