// Processes a single band MERIS data using the MERIS ADS.
private void processMerisBandWithADS(Band band, ProgressMonitor pm) throws IOException {
// load appropriate Sensor coefficientFile and init algorithm
// ----------------------------------------------------------
if (!loadBandCoefficients(band)) {
_logger.severe(
SmacConstants.LOG_MSG_COEFF_NOT_FOUND_1
+ band.getName()
+ SmacConstants.LOG_MSG_COEFF_NOT_FOUND_2); /*I18N*/
setCurrentStatus(ProcessorConstants.STATUS_FAILED);
return;
}
_logger.info(
SmacConstants.LOG_MSG_GENERATING_PIXEL_1
+ band.getName()
+ SmacConstants.LOG_MSG_GENERATING_PIXEL_2); /*I18N*/
// initialize vectors and other data
// ---------------------------------
int width = band.getSceneRasterWidth();
int height = band.getSceneRasterHeight();
Band outBand = _outputProduct.getBand(convertMerisBandName(band));
float[] sza = new float[width];
float[] saa = new float[width];
float[] vza = new float[width];
float[] vaa = new float[width];
float[] taup550 = new float[width];
float[] uh2o = new float[width];
float[] uo3 = new float[width];
float[] press = new float[width];
float[] elev = new float[width];
boolean[] process = new boolean[width];
float[] toa = new float[width];
float[] toa_corr = new float[width];
// set up vector - this parameter is constant for the request
for (int x = 0; x < width; x++) {
taup550[x] = _tau_aero_550;
process[x] = true;
}
// progress bar init
// -----------------
pm.beginTask(
SmacConstants.LOG_MSG_GENERATING_PIXEL_1
+ band.getName()
+ SmacConstants.LOG_MSG_GENERATING_PIXEL_2,
height * 10);
try {
// loop over all scanlines
// -----------------------
for (int y = 0; y < height; y++) {
// read scanline
// -------------
band.readPixels(0, y, width, 1, toa, SubProgressMonitor.create(pm, 1));
_szaBand.readPixels(0, y, width, 1, sza, SubProgressMonitor.create(pm, 1));
_saaBand.readPixels(0, y, width, 1, saa, SubProgressMonitor.create(pm, 1));
_vzaBand.readPixels(0, y, width, 1, vza, SubProgressMonitor.create(pm, 1));
_vaaBand.readPixels(0, y, width, 1, vaa, SubProgressMonitor.create(pm, 1));
_wvBand.readPixels(0, y, width, 1, uh2o, SubProgressMonitor.create(pm, 1));
_o3Band.readPixels(0, y, width, 1, uo3, SubProgressMonitor.create(pm, 1));
_pressBand.readPixels(0, y, width, 1, press, SubProgressMonitor.create(pm, 1));
_elevBand.readPixels(0, y, width, 1, elev, SubProgressMonitor.create(pm, 1));
// scale radiance to reflectance
// -------------------------------
toa = RsMathUtils.radianceToReflectance(toa, sza, band.getSolarFlux(), toa);
// correct pressure due to elevation
// ---------------------------------
press = RsMathUtils.simpleBarometric(press, elev, press);
// scale DU to cm * atm
// ----------------------
uo3 = dobsonToCmAtm(uo3);
// scale relative humidity to g/cm^2
// -----------------------------------
uh2o = relativeHumidityTogcm2(uh2o);
// forEachPixel bitmask
// ----------------
if (_bitMaskTerm != null) {
_inputProduct.readBitmask(0, y, width, 1, _bitMaskTerm, process, ProgressMonitor.NULL);
}
// process scanline
// ----------------
toa_corr =
_algorithm.run(
sza,
saa,
vza,
vaa,
taup550,
uh2o,
uo3,
press,
process,
_invalidPixel,
toa,
toa_corr);
// write scanline
// --------------
outBand.writePixels(0, y, width, 1, toa_corr, ProgressMonitor.NULL);
// update progressbar
// ------------------
pm.worked(1);
if (pm.isCanceled()) {
_logger.warning(ProcessorConstants.LOG_MSG_PROC_CANCELED);
setCurrentStatus(ProcessorConstants.STATUS_ABORTED);
return;
}
}
} finally {
pm.done();
}
_logger.info(ProcessorConstants.LOG_MSG_PROC_SUCCESS);
}
// Processes a single AATSR band.
private void processAatsrBand(Band band, ProgressMonitor pm) throws IOException {
// load appropriate Sensor coefficientFile and init algorithm
// ----------------------------------------------------------
if (!loadBandCoefficients(band)) {
_logger.severe(
SmacConstants.LOG_MSG_COEFF_NOT_FOUND_1
+ band.getName()
+ SmacConstants.LOG_MSG_COEFF_NOT_FOUND_2);
setCurrentStatus(ProcessorConstants.STATUS_FAILED);
return;
}
_logger.info(
SmacConstants.LOG_MSG_GENERATING_PIXEL_1
+ band.getName()
+ SmacConstants.LOG_MSG_GENERATING_PIXEL_2);
// initialize vectors and other data
// ---------------------------------
int width = band.getSceneRasterWidth();
int height = band.getSceneRasterHeight();
Band outBand = _outputProduct.getBand(band.getName());
boolean isForwardBand = checkForAATSRForwardBand(band);
float[] sza = new float[width];
float[] saa = new float[width];
float[] vza = new float[width];
float[] vaa = new float[width];
float[] taup550 = new float[width];
float[] uh2o = new float[width];
float[] uo3 = new float[width];
float[] press = new float[width];
boolean[] process = new boolean[width];
float[] toa = new float[width];
float[] toa_corr = new float[width];
TiePointGrid szaBand;
TiePointGrid saaBand;
TiePointGrid vzaBand;
TiePointGrid vaaBand;
Term bitMask;
// set the tie point bands according to input band view
// ----------------------------------------------------
if (isForwardBand) {
szaBand = _szaFwdBand;
saaBand = _saaFwdBand;
vzaBand = _vzaFwdBand;
vaaBand = _vaaFwdBand;
bitMask = _bitMaskTermForward;
} else {
szaBand = _szaBand;
saaBand = _saaBand;
vzaBand = _vzaBand;
vaaBand = _vaaBand;
bitMask = _bitMaskTerm;
}
// initialize vectors
// ------------------
for (int x = 0; x < width; x++) {
taup550[x] = _tau_aero_550;
uh2o[x] = _u_h2o;
uo3[x] = _u_o3;
press[x] = _surf_press;
process[x] = true;
}
// progress init
pm.beginTask(
SmacConstants.LOG_MSG_GENERATING_PIXEL_1
+ band.getName()
+ SmacConstants.LOG_MSG_GENERATING_PIXEL_2,
height * 6);
try {
// loop over all scanlines
for (int y = 0; y < band.getSceneRasterHeight(); y++) {
// read scanline
band.readPixels(0, y, width, 1, toa, SubProgressMonitor.create(pm, 1));
szaBand.readPixels(0, y, width, 1, sza, SubProgressMonitor.create(pm, 1));
saaBand.readPixels(0, y, width, 1, saa, SubProgressMonitor.create(pm, 1));
vzaBand.readPixels(0, y, width, 1, vza, SubProgressMonitor.create(pm, 1));
vaaBand.readPixels(0, y, width, 1, vaa, SubProgressMonitor.create(pm, 1));
// scale sun and view elevation to zenith angles
sza = RsMathUtils.elevationToZenith(sza, sza);
vza = RsMathUtils.elevationToZenith(vza, sza);
// forEachPixel bitmask
if (bitMask != null) {
_inputProduct.readBitmask(0, y, width, 1, bitMask, process, ProgressMonitor.NULL);
}
// process scanline
toa_corr =
_algorithm.run(
sza,
saa,
vza,
vaa,
taup550,
uh2o,
uo3,
press,
process,
_invalidPixel,
toa,
toa_corr);
// write scanline
outBand.writePixels(0, y, width, 1, toa_corr, ProgressMonitor.NULL);
// update progress
pm.worked(1);
if (pm.isCanceled()) {
_logger.warning(ProcessorConstants.LOG_MSG_PROC_CANCELED);
setCurrentStatus(ProcessorConstants.STATUS_ABORTED);
return;
}
}
} finally {
pm.done();
}
_logger.info(ProcessorConstants.LOG_MSG_PROC_SUCCESS);
}
// Processes a single spectralBand of MERIS data.
private void processMerisBand(Band spectralBand, ProgressMonitor pm) throws IOException {
// load appropriate Sensor coefficientFile and init algorithm
// ----------------------------------------------------------
if (!loadBandCoefficients(spectralBand)) {
_logger.severe(
SmacConstants.LOG_MSG_COEFF_NOT_FOUND_1
+ spectralBand.getName()
+ SmacConstants.LOG_MSG_COEFF_NOT_FOUND_2);
setCurrentStatus(ProcessorConstants.STATUS_FAILED);
return;
}
_logger.info(
SmacConstants.LOG_MSG_GENERATING_PIXEL_1
+ spectralBand.getName()
+ SmacConstants.LOG_MSG_GENERATING_PIXEL_2); /*I18N*/
// initialize vectors and other data
int n;
int width = spectralBand.getSceneRasterWidth();
int height = spectralBand.getSceneRasterHeight();
Band outBand = _outputProduct.getBand(convertMerisBandName(spectralBand));
float[] sza = new float[width];
float[] saa = new float[width];
float[] vza = new float[width];
float[] vaa = new float[width];
float[] taup550 = new float[width];
float[] uh2o = new float[width];
float[] uo3 = new float[width];
float[] press = new float[width];
boolean[] process = new boolean[width];
float[] toa = new float[width];
float[] toa_corr = new float[width];
for (n = 0; n < width; n++) {
taup550[n] = _tau_aero_550;
uh2o[n] = _u_h2o;
uo3[n] = _u_o3;
press[n] = _surf_press;
process[n] = true;
}
// progress init
pm.beginTask(
SmacConstants.LOG_MSG_GENERATING_PIXEL_1
+ spectralBand.getName()
+ SmacConstants.LOG_MSG_GENERATING_PIXEL_2,
height * 6);
try {
// loop over all scanlines
for (int y = 0; y < spectralBand.getSceneRasterHeight(); y++) {
// read scanline
spectralBand.readPixels(0, y, width, 1, toa, SubProgressMonitor.create(pm, 1));
_szaBand.readPixels(0, y, width, 1, sza, SubProgressMonitor.create(pm, 1));
_saaBand.readPixels(0, y, width, 1, saa, SubProgressMonitor.create(pm, 1));
_vzaBand.readPixels(0, y, width, 1, vza, SubProgressMonitor.create(pm, 1));
_vaaBand.readPixels(0, y, width, 1, vaa, SubProgressMonitor.create(pm, 1));
// scale radiances to reflectances
toa = RsMathUtils.radianceToReflectance(toa, sza, spectralBand.getSolarFlux(), toa);
// forEachPixel bitmask
if (_bitMaskTerm != null) {
_inputProduct.readBitmask(0, y, width, 1, _bitMaskTerm, process, ProgressMonitor.NULL);
}
// process scanline
toa_corr =
_algorithm.run(
sza,
saa,
vza,
vaa,
taup550,
uh2o,
uo3,
press,
process,
_invalidPixel,
toa,
toa_corr);
// write scanline
outBand.writePixels(0, y, width, 1, toa_corr, ProgressMonitor.NULL);
// update progressbar
pm.worked(1);
if (pm.isCanceled()) {
_logger.warning(ProcessorConstants.LOG_MSG_PROC_CANCELED);
setCurrentStatus(ProcessorConstants.STATUS_ABORTED);
return;
}
}
} finally {
pm.done();
}
_logger.info(ProcessorConstants.LOG_MSG_PROC_SUCCESS);
}