/**
* Corresponds to ticket #1811. Check that after a creation of a diagram with ports (on node) from
* the model content view , the layoutConstraint of all ports is not {0, 0}.
*/
public void testPortLocationForCreationFromModelContentView() {
// Get the desired package
final Model model = (Model) semanticModel;
assertNotNull("Corrupted input data", model);
// Get the diagram for the root of this model.
diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model);
// Get the class named "Class2"
PackageableElement element = model.getPackagedElement("Class2");
assertTrue("Corrupted input data", element instanceof Class);
final Class class2 = (Class) element;
// Get the class named "Class3"
element = model.getPackagedElement("Class3");
assertTrue("Corrupted input data", element instanceof Class);
final Class class3 = (Class) element;
final Property firstProperty = class3.getOwnedAttribute("Prop3to2", class2);
final Property secondProperty = class3.getOwnedAttribute("OtherProp3to2", class2);
// Open the editor (and refresh it)
final IEditorPart editorPart =
DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
final DDiagramElement firstPropertyDiagramElement =
getFirstDiagramElement(diagram, firstProperty);
assertNotNull(
"The first property has no corresponding diagramElement", firstPropertyDiagramElement);
final Node firstPropertyNode = getGmfNode(firstPropertyDiagramElement);
assertNotNull("The first property has no corresponding GMF node", firstPropertyNode);
assertTrue(
"Bag layout constraint type", firstPropertyNode.getLayoutConstraint() instanceof Location);
final Location firstLocation = (Location) firstPropertyNode.getLayoutConstraint();
final DDiagramElement secondPropertyDiagramElement =
getFirstDiagramElement(diagram, secondProperty);
assertNotNull(
"The second property has no corresponding diagramElement", secondPropertyDiagramElement);
final Node secondPropertyNode = getGmfNode(secondPropertyDiagramElement);
assertNotNull("The second property has no corresponding GMF node", secondPropertyNode);
assertTrue(
"Bag layout constraint type", secondPropertyNode.getLayoutConstraint() instanceof Location);
final Location secondLocation = (Location) secondPropertyNode.getLayoutConstraint();
assertFalse(
"All the layout constraints of the ports should not be in {0,0}",
firstLocation.getX() == 0
&& firstLocation.getY() == 0
&& secondLocation.getX() == 0
&& secondLocation.getY() == 0);
assertTrue(
"All the layout constraints of the ports should be different",
firstLocation.getX() != secondLocation.getX()
|| firstLocation.getY() != secondLocation.getY());
DialectUIManager.INSTANCE.closeEditor(editorPart, false);
TestsUtil.synchronizationWithUIThread();
}
public void testOpenOnlyStartupsOfSelectedSiriuss() throws Exception {
// Open startup representation
SessionHelper.openStartupRepresentations(session, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
// Check opening the session opens the right representation and not the
// other (-> representation of selected viewpoints should be opened)
assertEquals(
"Only the startup table editor should be opened (check editors opened).",
1,
getOpenedEditors().size());
IEditingSession uiSession = SessionUIManager.INSTANCE.getUISession(session);
assertEquals(
"Only the startup table editor should be opened (check editors associated with editing session).",
1,
uiSession.getEditors().size());
assertTrue(
"The table should be opened",
uiSession.getEditors().iterator().next().getRepresentation() instanceof DTable);
// Change viewpoint activation VP-2734 > VP-2891
uiSession.closeEditors(false, uiSession.getEditors());
TestsUtil.emptyEventsFromUIThread();
deactivateViewpoint("VP-2734");
activateViewpoint("VP-2891");
// Test O editor open.
TestsUtil.synchronizationWithUIThread();
assertEquals(
"Only the startup table editor should be opened (check editors opened).",
0,
getOpenedEditors().size());
assertEquals(
"Only the startup table editor should be opened (check editors associated with editing session).",
0,
uiSession.getEditors().size());
// Open startup representations
SessionHelper.openStartupRepresentations(session, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
// Check opening the session opens the right representation and not the
// other (-> representation of selected viewpoints should be opened)
assertEquals(
"Only the startup diagram editor should be opened (check editors opened).",
1,
getOpenedEditors().size());
assertEquals(
"Only the startup diagram editor should be opened (check editors associated with editing session).",
1,
uiSession.getEditors().size());
assertTrue(
"The diagram should be opened",
uiSession.getEditors().iterator().next().getRepresentation() instanceof DDiagram);
}
public void testOpenTableRepresentation() throws Exception {
if (TestsUtil.shouldSkipUnreliableTests()) {
/*
org.eclipse.swtbot.swt.finder.widgets.TimeoutException: Timeout after: 10000 ms.: tree item with text is not selected
at org.eclipse.swtbot.swt.finder.SWTBotFactory.waitUntil(SWTBotFactory.java:407)
at org.eclipse.swtbot.swt.finder.SWTBotFactory.waitUntil(SWTBotFactory.java:381)
at org.eclipse.swtbot.swt.finder.SWTBotFactory.waitUntil(SWTBotFactory.java:369)
at org.eclipse.sirius.tests.swtbot.support.api.business.UIProject.getUIItemFromResource(UIProject.java:157)
at org.eclipse.sirius.tests.swtbot.support.api.business.UIProject.selectResource(UIProject.java:122)
at org.eclipse.sirius.tests.swtbot.support.api.business.UIPerspective.openSessionCreationWizardFromSemanticResource(UIPerspective.java:188)
at org.eclipse.sirius.tests.swtbot.OpenMultipleRepresentationsTest.onSetUpAfterOpeningDesignerPerspective(OpenMultipleRepresentationsTest.java:61)
*/
return;
}
SWTBotTreeItem modelElementItem =
localSession.getLocalSessionBrowser().perSemantic().expandNode("root").click();
final UITableRepresentation tableRepresentation =
localSession
.newTableRepresentation("Classes in root package")
.on(modelElementItem)
.withDefaultName()
.ok();
final SWTBotEditor editor = tableRepresentation.open().getEditor();
assertEditorIsNotError("editor was an error one", editor);
}
@Override
protected void setUp() throws Exception {
super.setUp();
TestsUtil.emptyEventsFromUIThread();
genericSetUp(SEMANTIC_MODEL_PATH, MODELER_PATH, REPRESENTATION_MODEL_PATH);
diagram = (DDiagram) getRepresentations(REPRESENTATION_DESC_NAME).toArray()[0];
assertNotNull(diagram);
editor =
(DiagramEditor)
DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
assertNotNull(editor);
}
@Override
protected void tearDown() throws Exception {
DialectUIManager.INSTANCE.closeEditor(editorPart, false);
TestsUtil.synchronizationWithUIThread();
diagram = null;
editorPart = null;
super.tearDown();
}
private void doTestCloseOpenUnsynchronized() {
Model model;
Activity activity;
ActivityEdge edge;
DEdge edgeElement;
DialectUIManager.INSTANCE.closeEditor(editorPart, false);
TestsUtil.synchronizationWithUIThread();
diagram = (DDiagram) getRepresentations(REPRESENTATION_DESC_NAME).toArray()[0];
assertNotNull(diagram);
editorPart = DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
model = (Model) semanticModel;
activity = (Activity) model.getPackagedElements().get(0);
edge = activity.getEdges().get(0);
assertNotNull(edge);
edgeElement = getFirstEdgeElement(diagram, edge);
assertNotNull(edgeElement);
}
/** test to move up the second interaction use */
public void
testSecondInteractionUseVerticalMoveDownToCenterOfReflexiveSyncCallOnNotSemanticallyCoveredParticipant() {
if (TestsUtil.shouldSkipLongTests()) {
/*
junit.framework.AssertionFailedError: The execution named is not displayed at the expected vertical position expected:<420.0> but was:<485.0>
at junit.framework.Assert.fail(Assert.java:57)
at junit.framework.Assert.failNotEquals(Assert.java:329)
at junit.framework.Assert.assertEquals(Assert.java:142)
at junit.framework.TestCase.assertEquals(TestCase.java:298)
at org.eclipse.sirius.tests.swtbot.sequence.AbstractSequenceDiagramTestCase.assertSequenceNodeHasValidBounds(AbstractSequenceDiagramTestCase.java:1371)
at org.eclipse.sirius.tests.swtbot.sequence.AbstractSequenceDiagramTestCase.assertExecutionHasValidScreenBounds(AbstractSequenceDiagramTestCase.java:1305)
at org.eclipse.sirius.tests.swtbot.sequence.InteractionUseMoveDownTests.commonPreparationForMoveDownTests(InteractionUseMoveDownTests.java:227)
at org.eclipse.sirius.tests.swtbot.sequence.InteractionUseMoveDownTests.testSecondInteractionUseVerticalMoveDownToCenterOfReflexiveSyncCallOnNotSemanticallyCoveredParticipant(InteractionUseMoveDownTests.java:360)
*/
return;
}
int dY = commonPreparationForMoveDownTests();
// Move second interaction to have its top in the middle of E6
CheckEditPartMoved checkMoved = new CheckEditPartMoved(secondInteractionUseBot);
editor.drag(secondInteractionUseBounds.getTop(), e6Bounds.getCenter());
bot.waitUntil(checkMoved);
int dy2 = e6Bounds.getCenter().y - secondInteractionUseBounds.getTop().y;
int deltaResize = secondInteractionUseBounds.height;
e6Bot =
instanceRoleEditPartEBot
.parent()
.descendants(IsInstanceOf.instanceOf(ExecutionEditPart.class))
.get(0);
callMessageOnE6Bot = e6Bot.targetConnections().get(0);
returnMessageOfE6Bot = e6Bot.sourceConnections().get(0);
assertInteractionUseHasValidScreenBounds(
(InteractionUseEditPart) firstInteractionUseBot.part(), firstInteractionUseBounds);
assertInteractionUseHasValidScreenBounds(
(InteractionUseEditPart) secondInteractionUseBot.part(),
secondInteractionUseBounds.getTranslated(0, dy2));
assertExecutionHasValidScreenBounds((ExecutionEditPart) e1Bot.part(), e1Bounds);
assertExecutionHasValidScreenBounds(
(ExecutionEditPart) e2Bot.part(), e2Bounds.getResized(0, dY + deltaResize));
assertExecutionHasValidScreenBounds(
(ExecutionEditPart) e3Bot.part(), e3Bounds.getResized(0, dY + deltaResize));
assertExecutionHasValidScreenBounds(
(ExecutionEditPart) e4Bot.part(), e4Bounds.getResized(0, dY + deltaResize));
assertExecutionHasValidScreenBounds(
(ExecutionEditPart) e5Bot.part(), e5Bounds.getTranslated(0, dY + deltaResize));
assertExecutionHasValidScreenBounds(
(ExecutionEditPart) e6Bot.part(), e6Bounds.getResized(0, deltaResize));
assertMessageVerticalPosition(
(SequenceMessageEditPart) callMessageOnE1Bot.part(), callMessageOnE1Bounds.y);
assertMessageVerticalPosition(
(SequenceMessageEditPart) callMessageOnE2Bot.part(), callMessageOnE2Bounds.y);
assertMessageVerticalPosition(
(SequenceMessageEditPart) callMessageOnE4Bot.part(), callMessageOnE4Bounds.y);
assertMessageHasValidScreenBounds(
(SequenceMessageEditPart) callMessageOnE6Bot.part(), callMessageOnE6Bounds, true, false);
assertMessageVerticalPosition(
(SequenceMessageEditPart) returnMessageOfE1Bot.part(), returnMessageOfE1Bounds.y);
assertMessageVerticalPosition(
(SequenceMessageEditPart) returnMessageOfE2Bot.part(),
returnMessageOfE2Bounds.getTranslated(0, dY + deltaResize).y);
assertMessageVerticalPosition(
(SequenceMessageEditPart) returnMessageOfE4Bot.part(),
returnMessageOfE4Bounds.getTranslated(0, dY + deltaResize).y);
assertMessageHasValidScreenBounds(
(SequenceMessageEditPart) returnMessageOfE6Bot.part(),
returnMessageOfE6Bounds.getTranslated(0, deltaResize),
true,
false);
validateOrdering(24);
}
/**
* Check that :
*
* <UL>
* <LI>the size of new collapsed bordered nodes is 1x1 (and not the same as not collapsed),
* <LI>the space between two new collapsed bordered nodes is the same as between two new normal
* bordered nodes.
* <LI>the size of an existing bordered nodes is 1x1 after collapse filter application, and its
* location is contains in the original bounds.
* </UL>
*
* Steps of this test:
*
* <UL>
* <LI>Open a first diagram
* <UL>
* <LI>modify the semantic (causing creation of new ports),
* <LI>take the bounds of new ports (without collapse filter),
* <LI>take the space between them,
* <LI>apply the collapse filter,
* <LI>check that the size of the port is 1x1 and its new location is contained in the old
* bounds,
* <LI>close the diagram,
* <LI>undo the semantic modifications,
* </UL>
* <LI>Open a new diagram,
* <UL>
* <LI>enable the collapse filter,
* <LI>make the same semantic modifications (causing creation of new ports),
* <LI>compare the size ans the space with previous diagram.
* </UL>
* </UL>
*
* See VP-3833
*/
public void testPortLocationsAndMoreWithForCollapseFilter() {
// Get the desired package
final Model model = (Model) semanticModel;
assertNotNull("Corrupted input data", model);
// Get the class named "Class2"
PackageableElement element = model.getPackagedElement("Class2");
assertTrue("Corrupted input data", element instanceof Class);
final Class class2 = (Class) element;
// Get the class named "Class3"
element = model.getPackagedElement("Class3");
assertTrue("Corrupted input data", element instanceof Class);
final Class class3 = (Class) element;
// Get the diagram for the root of this model.
diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model);
// Open the editor (and refresh it)
IEditorPart editorPart =
DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
// Add 3 Property to class3 (that will cause the creation of 3
// new ports during refresh)
String prefix = "aPort";
addProperties(class3, class2, "aPort", 3);
// Refresh the diagram
refresh(diagram);
Property thirdProperty = class3.getOwnedAttribute(prefix + 1, class2);
DDiagramElement thirdPropertyDiagramElement = getFirstDiagramElement(diagram, thirdProperty);
Node thirdPropertyNode = getGmfNode(thirdPropertyDiagramElement);
final Bounds expectedThirdBounds = (Bounds) thirdPropertyNode.getLayoutConstraint();
Property fourthProperty = class3.getOwnedAttribute(prefix + 2, class2);
DDiagramElement fourthPropertyDiagramElement = getFirstDiagramElement(diagram, fourthProperty);
Node fourthPropertyNode = getGmfNode(fourthPropertyDiagramElement);
final Bounds expectedFourthBounds = (Bounds) fourthPropertyNode.getLayoutConstraint();
Property fifthProperty = class3.getOwnedAttribute(prefix + 3, class2);
DDiagramElement fifthPropertyDiagramElement = getFirstDiagramElement(diagram, fifthProperty);
Node fifthPropertyNode = getGmfNode(fifthPropertyDiagramElement);
final Bounds expectedFifthBounds = (Bounds) fifthPropertyNode.getLayoutConstraint();
// Activate the filter
activateFilter(diagram, "FilterPropertyStartingWithA");
// Refresh the diagram
refresh(diagram);
// Check the size and the new location of one of the collapsed bordered
// node
final Bounds collapseThirdBounds = (Bounds) thirdPropertyNode.getLayoutConstraint();
assertEquals(
"The width of the collapse bordered node is not OK.", 1, collapseThirdBounds.getWidth());
assertEquals(
"The height of the collapse bordered node is not OK.", 1, collapseThirdBounds.getHeight());
assertTrue(
"The new collapsed location should be contains in the not collapsed bounds.",
new Rectangle(
expectedThirdBounds.getX(),
expectedThirdBounds.getY(),
expectedThirdBounds.getWidth(),
expectedThirdBounds.getHeight())
.contains(new Point(collapseThirdBounds.getX(), collapseThirdBounds.getY())));
DialectUIManager.INSTANCE.closeEditor(editorPart, false);
TestsUtil.synchronizationWithUIThread();
// Remove the 3 added properties
removeProperties(class3, 3);
// Get the diagram for the root of this model.
diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model);
// Open the editor (and refresh it)
editorPart = DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
// Activate the filter
activateFilter(diagram, "FilterPropertyStartingWithA");
// Add 3 Property to class3 (that will cause the creation of 3
// new ports during refresh)
addProperties(class3, class2, "aPort", 3);
// Refresh the diagram
refresh(diagram);
thirdProperty = class3.getOwnedAttribute(prefix + 1, class2);
thirdPropertyDiagramElement = getFirstDiagramElement(diagram, thirdProperty);
thirdPropertyNode = getGmfNode(thirdPropertyDiagramElement);
Bounds thirdCollapseBounds = (Bounds) thirdPropertyNode.getLayoutConstraint();
assertEquals(
"The width of a new collapsed bordered node is not correct.",
1,
thirdCollapseBounds.getWidth());
assertEquals(
"The height of a new collapsed bordered node is not correct.",
1,
thirdCollapseBounds.getHeight());
fourthProperty = class3.getOwnedAttribute(prefix + 2, class2);
fourthPropertyDiagramElement = getFirstDiagramElement(diagram, fourthProperty);
fourthPropertyNode = getGmfNode(fourthPropertyDiagramElement);
Bounds fourthCollapseBounds = (Bounds) fourthPropertyNode.getLayoutConstraint();
assertEquals(
"The width of a new collapsed bordered node is not correct.",
1,
fourthCollapseBounds.getWidth());
assertEquals(
"The height of a new collapsed bordered node is not correct.",
1,
fourthCollapseBounds.getHeight());
fifthProperty = class3.getOwnedAttribute(prefix + 3, class2);
fifthPropertyDiagramElement = getFirstDiagramElement(diagram, fifthProperty);
fifthPropertyNode = getGmfNode(fifthPropertyDiagramElement);
Bounds fifthCollapseBounds = (Bounds) fifthPropertyNode.getLayoutConstraint();
assertEquals(
"The width of a new collapsed bordered node is not correct.",
1,
fifthCollapseBounds.getWidth());
assertEquals(
"The height of a new collapsed bordered node is not correct.",
1,
fifthCollapseBounds.getHeight());
assertEquals(
"The space bewteen the collapsed bordered nodes should be the same as between the not collapsed bordered nodes.",
expectedFourthBounds.getY() - expectedThirdBounds.getY(),
fourthCollapseBounds.getY() - thirdCollapseBounds.getY());
assertEquals(
"The space bewteen the collapsed bordered nodes should be the same as between the not collapsed bordered nodes.",
expectedFifthBounds.getY() - expectedFourthBounds.getY(),
fifthCollapseBounds.getY() - fourthCollapseBounds.getY());
DialectUIManager.INSTANCE.closeEditor(editorPart, false);
TestsUtil.synchronizationWithUIThread();
}
/**
* Open the diagram, modify the semantic (causing creation of new ports), check the position of
* new ports (not the same). See VP-3095
*/
protected void testPortLocationAfterRefresh(boolean activateCollapseFilter) {
// Get the desired package
final Model model = (Model) semanticModel;
assertNotNull("Corrupted input data", model);
// Get the diagram for the root of this model.
diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model);
// Get the class named "Class2"
PackageableElement element = model.getPackagedElement("Class2");
assertTrue("Corrupted input data", element instanceof Class);
final Class class2 = (Class) element;
// Get the class named "Class3"
element = model.getPackagedElement("Class3");
assertTrue("Corrupted input data", element instanceof Class);
final Class class3 = (Class) element;
final Property firstProperty = class3.getOwnedAttribute("Prop3to2", class2);
final Property secondProperty = class3.getOwnedAttribute("OtherProp3to2", class2);
// Open the editor (and refresh it)
final IEditorPart editorPart =
DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
if (activateCollapseFilter) {
activateFilter(diagram, "FilterPropertyStartingWithA");
}
// Add 3 Property to class3 (that will cause the creation of 3
// new ports during refresh).
addProperties(class3, class2, "Prop3to2_", 3);
// Refresh the diagram
refresh(diagram);
final DDiagramElement firstPropertyDiagramElement =
getFirstDiagramElement(diagram, firstProperty);
assertNotNull(
"The first property has no corresponding diagramElement", firstPropertyDiagramElement);
final Node firstPropertyNode = getGmfNode(firstPropertyDiagramElement);
assertNotNull("The first property has no corresponding GMF node", firstPropertyNode);
assertTrue(
"Bag layout constraint type", firstPropertyNode.getLayoutConstraint() instanceof Location);
final Location firstLocation = (Location) firstPropertyNode.getLayoutConstraint();
final DDiagramElement secondPropertyDiagramElement =
getFirstDiagramElement(diagram, secondProperty);
assertNotNull(
"The second property has no corresponding diagramElement", secondPropertyDiagramElement);
final Node secondPropertyNode = getGmfNode(secondPropertyDiagramElement);
assertNotNull("The second property has no corresponding GMF node", secondPropertyNode);
assertTrue(
"Bag layout constraint type", secondPropertyNode.getLayoutConstraint() instanceof Location);
final Location secondLocation = (Location) secondPropertyNode.getLayoutConstraint();
assertFalse(
"All the layout constraints of the ports should not be in {0,0}",
firstLocation.getX() == 0
&& firstLocation.getY() == 0
&& secondLocation.getX() == 0
&& secondLocation.getY() == 0);
assertTrue(
"All the layout constraints of the ports should be different",
firstLocation.getX() != secondLocation.getX()
|| firstLocation.getY() != secondLocation.getY());
final Property thirdProperty = class3.getOwnedAttribute("Prop3to2_1", class2);
final Property fourthProperty = class3.getOwnedAttribute("Prop3to2_2", class2);
final Property fifthProperty = class3.getOwnedAttribute("Prop3to2_3", class2);
final DDiagramElement thirdPropertyDiagramElement =
getFirstDiagramElement(diagram, thirdProperty);
assertNotNull(
"The third property has no corresponding diagramElement", thirdPropertyDiagramElement);
final Node thirdPropertyNode = getGmfNode(thirdPropertyDiagramElement);
assertNotNull("The third property has no corresponding GMF node", thirdPropertyNode);
assertTrue(
"Bag layout constraint type", thirdPropertyNode.getLayoutConstraint() instanceof Location);
final Location thirdLocation = (Location) thirdPropertyNode.getLayoutConstraint();
final DDiagramElement fourthPropertyDiagramElement =
getFirstDiagramElement(diagram, fourthProperty);
assertNotNull(
"The fourth property has no corresponding diagramElement", fourthPropertyDiagramElement);
final Node fourthPropertyNode = getGmfNode(fourthPropertyDiagramElement);
assertNotNull("The fourth property has no corresponding GMF node", fourthPropertyNode);
assertTrue(
"Bag layout constraint type", fourthPropertyNode.getLayoutConstraint() instanceof Location);
final Location fourthLocation = (Location) fourthPropertyNode.getLayoutConstraint();
final DDiagramElement fifthPropertyDiagramElement =
getFirstDiagramElement(diagram, fifthProperty);
assertNotNull(
"The fifth property has no corresponding diagramElement", fifthPropertyDiagramElement);
final Node fifthPropertyNode = getGmfNode(fifthPropertyDiagramElement);
assertNotNull("The fifth property has no corresponding GMF node", fifthPropertyNode);
assertTrue(
"Bag layout constraint type", fifthPropertyNode.getLayoutConstraint() instanceof Location);
final Location fifthLocation = (Location) fifthPropertyNode.getLayoutConstraint();
assertFalse(
"All the layout constraints of the ports should not be in {0,0}",
thirdLocation.getX() == 0
&& thirdLocation.getY() == 0
&& fourthLocation.getX() == 0
&& fourthLocation.getY() == 0
&& fifthLocation.getX() == 0
&& fifthLocation.getY() == 0);
assertTrue(
"All the layout constraints of the ports should be different",
thirdLocation.getX() != fourthLocation.getX()
|| thirdLocation.getY() != fourthLocation.getY());
assertTrue(
"All the layout constraints of the ports should be different",
thirdLocation.getX() != fifthLocation.getX()
|| thirdLocation.getY() != fifthLocation.getY());
assertTrue(
"All the layout constraints of the ports should be different",
fifthLocation.getX() != fourthLocation.getX()
|| fifthLocation.getY() != fourthLocation.getY());
DialectUIManager.INSTANCE.closeEditor(editorPart, false);
TestsUtil.synchronizationWithUIThread();
}
/**
* Corresponds to ticket #1811. Check that after a creation of a diagram with ports from an
* existing diagram, the layoutConstraint of all ports is not {0, 0}.
*/
public void testPortLocationForCreationFromNavigation() {
// Get the desired package
final Model model = (Model) semanticModel;
assertNotNull("Corrupted input data", model);
// Get the diagram for the root of this model.
diagram = (DDiagram) createRepresentation(NODE_REPRESENTATION_DESC_NAME, model);
// Open the editor (and refresh it)
final IEditorPart editorPart =
DialectUIManager.INSTANCE.openEditor(session, diagram, new NullProgressMonitor());
TestsUtil.synchronizationWithUIThread();
// Set the focus to the desired package
assertTrue(
"We should have a DiagramDocumentEditor", editorPart instanceof DiagramDocumentEditor);
final DiagramDocumentEditor diagramEditor = (DiagramDocumentEditor) editorPart;
// Get the package named "SubPackage"
PackageableElement element = model.getPackagedElement("SubPackage");
assertTrue("Corrupted input data", element instanceof Package);
final Package packageSubPackage = (Package) element;
IMenuManager popupMenu = new MenuManager();
popupMenu.add(
new MenuManager(
IWorkbenchActionConstants.MB_ADDITIONS,
IWorkbenchActionConstants.MB_ADDITIONS)); // $NON-NLS-1$ //$NON-NLS-2$
popupMenu.add(new MenuManager("popup.new", "popup.new")); // $NON-NLS-1$
// Set the focus to package SubPackage
IGraphicalEditPart elementEditPart =
getEditPart(getFirstDiagramElement(diagram, packageSubPackage));
diagramEditor.getDiagramGraphicalViewer().setFocus(elementEditPart);
DNode focusedElement =
(DNode)
((GraphicalEditPart) diagramEditor.getDiagramGraphicalViewer().getFocusEditPart())
.resolveSemanticElement();
assertTrue(
"This is not the good focused element", focusedElement.getTarget() instanceof Package);
assertEquals(
"This is not the good focused element",
"SubPackage",
((Package) focusedElement.getTarget()).getName());
ContributionItemService.getInstance().contributeToPopupMenu(popupMenu, diagramEditor);
// Check the popup menu.
IMenuManager newRepresentationMenu = (IMenuManager) popupMenu.find("popup.new");
IContributionItem[] items = newRepresentationMenu.getItems();
boolean inNewRepresentationToGroup = false;
ActionContributionItem actionContribution = null;
for (int i = 0; i < items.length; i++) {
if (items[i] instanceof Separator) {
Separator sep = (Separator) items[i];
if ("createRepresentationGroup".equals(sep.getId())) {
inNewRepresentationToGroup = true;
} else {
inNewRepresentationToGroup = false;
}
}
if (inNewRepresentationToGroup && items[i] instanceof ActionContributionItem) {
assertNull("There should be only one ActionContributionItem", actionContribution);
actionContribution = (ActionContributionItem) items[i];
}
}
assertNotNull("There should be one ActionContributionItem", actionContribution);
final IAction action = actionContribution.getAction();
assertEquals("Action has not the correct text", "New diagram", action.getText());
// Disabling ui callback of diagram command factory
final Object adapter = diagramEditor.getAdapter(IDiagramCommandFactoryProvider.class);
final IDiagramCommandFactoryProvider diagramCmdFactoryProvider =
(IDiagramCommandFactoryProvider) adapter;
final IDiagramCommandFactory diagramCommandFactory =
diagramCmdFactoryProvider.getCommandFactory(session.getTransactionalEditingDomain());
diagramCommandFactory.setUserInterfaceCallBack(new NoUICallback());
action.run();
IEditorPart editor2 =
PlatformUI.getWorkbench().getActiveWorkbenchWindow().getActivePage().getActiveEditor();
assertTrue("We should have a DiagramDocumentEditor", editor2 instanceof DiagramDocumentEditor);
final DiagramDocumentEditor diagramEditor2 = (DiagramDocumentEditor) editor2;
GraphicalEditPart diagramPart = (GraphicalEditPart) diagramEditor2.getDiagramEditPart();
final DSemanticDiagram diagram2 = (DSemanticDiagram) diagramPart.resolveSemanticElement();
assertEquals(
"The opened diagram is not valid", diagram2.getTarget(), focusedElement.getTarget());
// Get the class named "SubClass1"
element = packageSubPackage.getPackagedElement("SubClass1");
assertTrue("Corrupted input data", element instanceof Class);
final Class subClass1 = (Class) element;
final Property firstProperty = subClass1.getOwnedAttribute("Prop1", subClass1);
final Property secondProperty = subClass1.getOwnedAttribute("Prop2", subClass1);
final DDiagramElement firstPropertyDiagramElement =
getFirstDiagramElement(diagram2, firstProperty);
assertNotNull(
"The first property has no corresponding diagramElement", firstPropertyDiagramElement);
final Node firstPropertyNode = getGmfNode(firstPropertyDiagramElement);
assertNotNull("The first property has no corresponding GMF node", firstPropertyNode);
assertTrue(
"Bag layout constraint type", firstPropertyNode.getLayoutConstraint() instanceof Location);
final Location firstLocation = (Location) firstPropertyNode.getLayoutConstraint();
final DDiagramElement secondPropertyDiagramElement =
getFirstDiagramElement(diagram2, secondProperty);
assertNotNull(
"The second property has no corresponding diagramElement", secondPropertyDiagramElement);
final Node secondPropertyNode = getGmfNode(secondPropertyDiagramElement);
assertNotNull("The second property has no corresponding GMF node", secondPropertyNode);
assertTrue(
"Bag layout constraint type", secondPropertyNode.getLayoutConstraint() instanceof Location);
final Location secondLocation = (Location) secondPropertyNode.getLayoutConstraint();
assertFalse(
"All the layout constraints of the ports should not be in {0,0}",
firstLocation.getX() == 0
&& firstLocation.getY() == 0
&& secondLocation.getX() == 0
&& secondLocation.getY() == 0);
assertTrue(
"All the layout constraints of the ports should be different",
firstLocation.getX() != secondLocation.getX()
|| firstLocation.getY() != secondLocation.getY());
DialectUIManager.INSTANCE.closeEditor(editorPart, false);
TestsUtil.synchronizationWithUIThread();
DialectUIManager.INSTANCE.closeEditor(editor2, false);
TestsUtil.synchronizationWithUIThread();
}
private void doTest() throws Exception {
activateFilter(diagram, HIDE_EREFERENCES);
TestsUtil.synchronizationWithUIThread();
deactivateFilter(diagram, HIDE_EREFERENCES);
TestsUtil.synchronizationWithUIThread();
}