Beispiel #1
0
 /** Set the RTS line */
 public void setRTS(boolean state) {
   try {
     port.setRTS(state);
   } catch (SerialPortException e) {
     throw new RuntimeException("Error setting the RTS line: " + e.getExceptionType());
   }
 }
Beispiel #2
0
 public boolean getDSR() {
   try {
     return port.isDSR();
   } catch (SerialPortException e) {
     throw new RuntimeException("Error reading the DSR line: " + e.getExceptionType());
   }
 }
Beispiel #3
0
 /**
  * @generate Serial_write.xml
  *     <h3>Advanced</h3>
  *     Write a String to the output. Note that this doesn't account for Unicode (two bytes per
  *     char), nor will it send UTF8 characters.. It assumes that you mean to send a byte buffer
  *     (most often the case for networking and serial i/o) and will only use the bottom 8 bits of
  *     each char in the string. (Meaning that internally it uses String.getBytes)
  *     <p>If you want to move Unicode data, you can first convert the String to a byte stream in
  *     the representation of your choice (i.e. UTF8 or two-byte Unicode data), and send it as a
  *     byte array.
  * @webref serial:serial
  * @usage web_application
  * @param src data to write
  */
 public void write(String src) {
   try {
     port.writeString(src);
   } catch (SerialPortException e) {
     throw new RuntimeException(
         "Error writing to serial port " + e.getPortName() + ": " + e.getExceptionType());
   }
 }
Beispiel #4
0
 /** Set the DTR line */
 public void setDTR(boolean state) {
   // there is no way to influence the behavior of the DTR line when opening the serial port
   // this means that at least on Linux and OS X, Arduino devices are always reset
   try {
     port.setDTR(state);
   } catch (SerialPortException e) {
     throw new RuntimeException("Error setting the DTR line: " + e.getExceptionType());
   }
 }
Beispiel #5
0
 /** @param src data to write */
 public void write(byte[] src) {
   try {
     // this might block if the serial device is not yet ready (esp. tty devices under OS X)
     port.writeBytes(src);
     // we used to call flush() here
   } catch (SerialPortException e) {
     throw new RuntimeException(
         "Error writing to serial port " + e.getPortName() + ": " + e.getExceptionType());
   }
 }
Beispiel #6
0
 /**
  * @generate serialEvent.xml
  * @webref serial:events
  * @usage web_application
  * @param event the port where new data is available
  */
 public void serialEvent(SerialPortEvent event) {
   if (event.getEventType() == SerialPortEvent.RXCHAR) {
     int toRead;
     try {
       while (0 < (toRead = port.getInputBufferBytesCount())) {
         // this method can be called from the context of another thread
         synchronized (buffer) {
           // read one byte at a time if the sketch is using serialEvent
           if (serialEventMethod != null) {
             toRead = 1;
           }
           // enlarge buffer if necessary
           if (buffer.length < inBuffer + toRead) {
             byte temp[] = new byte[buffer.length << 1];
             System.arraycopy(buffer, 0, temp, 0, inBuffer);
             buffer = temp;
           }
           // read an array of bytes and copy it into our buffer
           byte[] read = port.readBytes(toRead);
           System.arraycopy(read, 0, buffer, inBuffer, read.length);
           inBuffer += read.length;
         }
         if (serialEventMethod != null) {
           if ((0 < bufferUntilSize && bufferUntilSize <= inBuffer - readOffset)
               || (0 == bufferUntilSize && bufferUntilByte == buffer[inBuffer - 1])) {
             try {
               // serialEvent() is invoked in the context of the current (serial) thread
               // which means that serialization and atomic variables need to be used to
               // guarantee reliable operation (and better not draw() etc..)
               // serialAvailable() does not provide any real benefits over using
               // available() and read() inside draw - but this function has no
               // thread-safety issues since it's being invoked during pre in the context
               // of the Processing applet
               serialEventMethod.invoke(parent, this);
             } catch (Exception e) {
               System.err.println("Error, disabling serialEvent() for " + port.getPortName());
               System.err.println(e.getLocalizedMessage());
               serialEventMethod = null;
             }
           }
         }
         invokeSerialAvailable = true;
       }
     } catch (SerialPortException e) {
       throw new RuntimeException(
           "Error reading from serial port " + e.getPortName() + ": " + e.getExceptionType());
     }
   }
 }
Beispiel #7
0
  /**
   * @param parity 'N' for none, 'E' for even, 'O' for odd, 'M' for mark, 'S' for space ('N' is the
   *     default)
   * @param dataBits 8 is the default
   * @param stopBits 1.0, 1.5, or 2.0 (1.0 is the default)
   */
  public Serial(
      PApplet parent, String portName, int baudRate, char parity, int dataBits, float stopBits) {
    this.parent = parent;
    parent.registerMethod("dispose", this);
    parent.registerMethod("pre", this);

    // setup parity
    if (parity == 'O') {
      parity = SerialPort.PARITY_ODD;
    } else if (parity == 'E') {
      parity = SerialPort.PARITY_EVEN;
    } else if (parity == 'M') {
      parity = SerialPort.PARITY_MARK;
    } else if (parity == 'S') {
      parity = SerialPort.PARITY_SPACE;
    } else {
      parity = SerialPort.PARITY_NONE;
    }

    // setup stop bits
    int stopBitsIdx = SerialPort.STOPBITS_1;
    if (stopBits == 1.5f) {
      stopBitsIdx = SerialPort.STOPBITS_1_5;
    } else if (stopBits == 2) {
      stopBitsIdx = SerialPort.STOPBITS_2;
    }

    port = new SerialPort(portName);
    try {
      // the native open() call is not using O_NONBLOCK, so this might block for certain operations
      // (see write())
      port.openPort();
      port.setParams(baudRate, dataBits, stopBitsIdx, parity);
      // we could register more events here
      port.addEventListener(this, SerialPort.MASK_RXCHAR);
    } catch (SerialPortException e) {
      // this used to be a RuntimeException before, so stick with it
      throw new RuntimeException(
          "Error opening serial port " + e.getPortName() + ": " + e.getExceptionType());
    }

    serialEventMethod = findCallback("serialEvent");
    serialAvailableMethod = findCallback("serialAvailable");
  }