/**
* Write properly escaped text from a character array. If there is an open element that has been
* created by a call to <code>startElement()</code>, that element will be closed first.
*
* <p>
*
* <p>All angle bracket occurrences in the argument must be escaped using the &gt; &lt;
* syntax.
*
* @param text Text to be written
* @param off Starting offset (zero-relative)
* @param len Number of characters to be written
* @throws IndexOutOfBoundsException if the calculated starting or ending position is outside the
* bounds of the character array
* @throws IOException if an input/output error occurs
* @throws NullPointerException if <code>text</code> is <code>null</code>
*/
public void writeText(char text[], int off, int len) throws IOException {
if (text == null) {
throw new NullPointerException(
MessageUtils.getExceptionMessageString(
MessageUtils.NULL_PARAMETERS_ERROR_MESSAGE_ID, "text"));
}
if (off < 0 || off > text.length || len < 0 || len > text.length) {
throw new IndexOutOfBoundsException();
}
closeStartIfNecessary();
if (writingCdata) {
// RELEASE_PENDING
// Might take a page from the HtmlUtils book and if the content being written
// is more than 16 chars, then use an existing buffer and copy the contents
// to said buffer. If 16 or less, then just iterate over the string using charAt()
char[] cbuf = new char[off + len];
System.arraycopy(text, off, cbuf, 0, len);
writer.write(escapeArray(cbuf));
} else if (dontEscape) {
writer.write(text, off, len);
} else {
HtmlUtils.writeText(writer, escapeUnicode, escapeIso, buffer, text, off, len);
}
}
/**
* Write a properly encoded URI attribute name and the corresponding value. The value text will be
* converted to a String if necessary). This method may only be called after a call to <code>
* startElement()</code>, and before the opened element has been closed.
*
* @param name Attribute name to be added
* @param value Attribute value to be added
* @param componentPropertyName The name of the component property to which this attribute
* argument applies. This argument may be <code>null</code>.
* @throws IllegalStateException if this method is called when there is no currently open element
* @throws IOException if an input/output error occurs
* @throws NullPointerException if <code>name</code> or <code>value</code> is <code>null</code>
*/
public void writeURIAttribute(String name, Object value, String componentPropertyName)
throws IOException {
if (name == null) {
throw new NullPointerException(
MessageUtils.getExceptionMessageString(
MessageUtils.NULL_PARAMETERS_ERROR_MESSAGE_ID, "name"));
}
if (value == null) {
throw new NullPointerException(
MessageUtils.getExceptionMessageString(
MessageUtils.NULL_PARAMETERS_ERROR_MESSAGE_ID, "value"));
}
if (isCdata) {
return;
}
if (name.equalsIgnoreCase("src") && isScriptOrStyle()) {
scriptOrStyleSrc = true;
}
attributesBuffer.write(' ');
attributesBuffer.write(name);
attributesBuffer.write("=\"");
String stringValue = value.toString();
ensureTextBufferCapacity(stringValue);
// Javascript URLs should not be URL-encoded
if (stringValue.startsWith("javascript:")) {
HtmlUtils.writeAttribute(
attributesBuffer,
escapeUnicode,
escapeIso,
buffer,
stringValue,
textBuffer,
isScriptInAttributeValueEnabled);
} else {
HtmlUtils.writeURL(attributesBuffer, stringValue, textBuffer, encoding);
}
attributesBuffer.write('"');
}
/**
* Write a properly escaped single character, If there is an open element that has been created by
* a call to <code>startElement()</code>, that element will be closed first.
*
* <p>
*
* <p>All angle bracket occurrences in the argument must be escaped using the &gt; &lt;
* syntax.
*
* @param text Text to be written
* @throws IOException if an input/output error occurs
*/
public void writeText(char text) throws IOException {
closeStartIfNecessary();
if (dontEscape) {
writer.write(text);
} else {
charHolder[0] = text;
HtmlUtils.writeText(writer, escapeUnicode, escapeIso, buffer, charHolder);
}
}
/**
* Write a properly escaped attribute name and the corresponding value. The value text will be
* converted to a String if necessary. This method may only be called after a call to <code>
* startElement()</code>, and before the opened element has been closed.
*
* @param name Attribute name to be added
* @param value Attribute value to be added
* @param componentPropertyName The name of the component property to which this attribute
* argument applies. This argument may be <code>null</code>.
* @throws IllegalStateException if this method is called when there is no currently open element
* @throws IOException if an input/output error occurs
* @throws NullPointerException if <code>name</code> is <code>null</code>
*/
public void writeAttribute(String name, Object value, String componentPropertyName)
throws IOException {
if (name == null) {
throw new NullPointerException(
MessageUtils.getExceptionMessageString(
MessageUtils.NULL_PARAMETERS_ERROR_MESSAGE_ID, "name"));
}
if (value == null) {
return;
}
if (isCdata) {
return;
}
if (name.equalsIgnoreCase("src") && isScriptOrStyle()) {
scriptOrStyleSrc = true;
}
Class valueClass = value.getClass();
// Output Boolean values specially
if (valueClass == Boolean.class) {
if (Boolean.TRUE.equals(value)) {
// NOTE: HTML 4.01 states that boolean attributes
// may legally take a single value which is the
// name of the attribute itself or appear using
// minimization.
// http://www.w3.org/TR/html401/intro/sgmltut.html#h-3.3.4.2
attributesBuffer.write(' ');
attributesBuffer.write(name);
attributesBuffer.write("=\"");
attributesBuffer.write(name);
attributesBuffer.write('"');
}
} else {
attributesBuffer.write(' ');
attributesBuffer.write(name);
attributesBuffer.write("=\"");
// write the attribute value
String val = value.toString();
ensureTextBufferCapacity(val);
HtmlUtils.writeAttribute(
attributesBuffer,
escapeUnicode,
escapeIso,
buffer,
val,
textBuffer,
isScriptInAttributeValueEnabled);
attributesBuffer.write('"');
}
}
/**
* Write properly escaped text from a character array. The output from this command is identical
* to the invocation: <code>writeText(c, 0, c.length)</code>. If there is an open element that has
* been created by a call to <code>startElement()</code>, that element will be closed first.
*
* <p>
*
* <p>All angle bracket occurrences in the argument must be escaped using the &gt; &lt;
* syntax.
*
* @param text Text to be written
* @throws IOException if an input/output error occurs
* @throws NullPointerException if <code>text</code> is <code>null</code>
*/
public void writeText(char text[]) throws IOException {
if (text == null) {
throw new NullPointerException(
MessageUtils.getExceptionMessageString(
MessageUtils.NULL_PARAMETERS_ERROR_MESSAGE_ID, "text"));
}
closeStartIfNecessary();
if (dontEscape) {
writer.write(text);
} else {
HtmlUtils.writeText(writer, escapeUnicode, escapeIso, buffer, text);
}
}
/**
* Write a properly escaped object. The object will be converted to a String if necessary. If
* there is an open element that has been created by a call to <code>startElement()</code>, that
* element will be closed first.
*
* @param text Text to be written
* @param componentPropertyName The name of the component property to which this text argument
* applies. This argument may be <code>null</code>.
* @throws IOException if an input/output error occurs
* @throws NullPointerException if <code>text</code> is <code>null</code>
*/
public void writeText(Object text, String componentPropertyName) throws IOException {
if (text == null) {
throw new NullPointerException(
MessageUtils.getExceptionMessageString(
MessageUtils.NULL_PARAMETERS_ERROR_MESSAGE_ID, "text"));
}
closeStartIfNecessary();
if (writingCdata) {
writer.write(escapeArray(text.toString().toCharArray()));
} else if (dontEscape) {
writer.write(text.toString());
} else {
String val = text.toString();
ensureTextBufferCapacity(val);
HtmlUtils.writeText(writer, escapeUnicode, escapeIso, buffer, val, textBuffer);
}
}
/**
* Write the end of an element. This method will first close any open element created by a call to
* <code>startElement()</code>.
*
* @param name Name of the element to be ended
* @throws IOException if an input/output error occurs
* @throws NullPointerException if <code>name</code> is <code>null</code>
*/
public void endElement(String name) throws IOException {
if (name == null) {
throw new NullPointerException(
MessageUtils.getExceptionMessageString(
MessageUtils.NULL_PARAMETERS_ERROR_MESSAGE_ID, "name"));
}
if (!writingCdata) {
// always turn escaping back on once an element ends unless we're
// still writing cdata content
dontEscape = false;
}
isXhtml = getContentType().equals(RIConstants.XHTML_CONTENT_TYPE);
if (isScriptOrStyle(name) && !scriptOrStyleSrc && writer instanceof FastStringWriter) {
String result = ((FastStringWriter) writer).getBuffer().toString();
writer = origWriter;
if (result != null) {
String trim = result.trim();
if (isXhtml) {
if (isScript) {
Matcher cdataStartSlashSlash = CDATA_START_SLASH_SLASH.matcher(trim),
cdataEndSlashSlash = CDATA_END_SLASH_SLASH.matcher(trim),
cdataStartSlashStar = CDATA_START_SLASH_STAR.matcher(trim),
cdataEndSlashStar = CDATA_END_SLASH_STAR.matcher(trim);
int trimLen = trim.length(), start, end;
// case 1 start is // end is //
if (cdataStartSlashSlash.find() && cdataEndSlashSlash.find()) {
start = cdataStartSlashSlash.end() - cdataStartSlashSlash.start();
end = trimLen - (cdataEndSlashSlash.end() - cdataEndSlashSlash.start());
writer.write(trim.substring(start, end));
}
// case 2 start is // end is /* */
else if ((null != cdataStartSlashSlash.reset() && cdataStartSlashSlash.find())
&& cdataEndSlashStar.find()) {
start = cdataStartSlashSlash.end() - cdataStartSlashSlash.start();
end = trimLen - (cdataEndSlashStar.end() - cdataEndSlashStar.start());
writer.write(trim.substring(start, end));
}
// case 3 start is /* */ end is /* */
else if (cdataStartSlashStar.find()
&& (null != cdataEndSlashStar.reset() && cdataEndSlashStar.find())) {
start = cdataStartSlashStar.end() - cdataStartSlashStar.start();
end = trimLen - (cdataEndSlashStar.end() - cdataEndSlashStar.start());
writer.write(trim.substring(start, end));
}
// case 4 start is /* */ end is //
else if ((null != cdataStartSlashStar.reset() && cdataStartSlashStar.find())
&& (null != cdataEndSlashStar.reset() && cdataEndSlashSlash.find())) {
start = cdataStartSlashStar.end() - cdataStartSlashStar.start();
end = trimLen - (cdataEndSlashSlash.end() - cdataEndSlashSlash.start());
writer.write(trim.substring(start, end));
}
// case 5 no commented out cdata present.
else {
writer.write(result);
}
} else {
if (trim.startsWith("<![CDATA[") && trim.endsWith("]]>")) {
writer.write(trim.substring(9, trim.length() - 3));
} else {
writer.write(result);
}
}
} else {
if (trim.startsWith("<!--") && trim.endsWith("//-->")) {
writer.write(trim.substring(4, trim.length() - 5));
} else {
writer.write(result);
}
}
}
if (isXhtml) {
if (!writingCdata) {
if (isScript) {
writer.write("\n//]]>\n");
} else {
writer.write("\n]]>\n");
}
}
} else {
if (isScriptHidingEnabled) {
writer.write("\n//-->\n");
}
}
}
isScript = false;
isStyle = false;
if ("cdata".equalsIgnoreCase(name)) {
endCDATA();
return;
}
// See if we need to close the start of the last element
if (closeStart) {
boolean isEmptyElement = HtmlUtils.isEmptyElement(name);
// Tricky: we need to use the writer ivar here, rather than the
// one from the FacesContext because we don't want
// spurious /> characters to appear in the output.
if (isEmptyElement) {
flushAttributes();
writer.write(" />");
closeStart = false;
return;
}
flushAttributes();
writer.write('>');
closeStart = false;
}
writer.write("</");
writer.write(name);
writer.write('>');
}
/**
* Constructor sets the <code>ResponseWriter</code> and encoding.
*
* <p>The argument configPrefs is a map of configurable prefs that affect this instance's
* behavior. Supported keys are:
*
* <p>BooleanWebContextInitParameter.EnableJSStyleHiding: <code>true</code> if the writer should
* attempt to hide JS from older browsers
*
* @param writer the <code>ResponseWriter</code>
* @param contentType the content type.
* @param encoding the character encoding.
* @throws javax.faces.FacesException the encoding is not recognized.
*/
public HtmlResponseWriter(
Writer writer,
String contentType,
String encoding,
Boolean isScriptHidingEnabled,
Boolean isScriptInAttributeValueEnabled,
WebConfiguration.DisableUnicodeEscaping disableUnicodeEscaping)
throws FacesException {
this.writer = writer;
if (null != contentType) {
this.contentType = contentType;
}
this.encoding = encoding;
// init those configuration parameters not yet initialized
WebConfiguration webConfig = null;
if (isScriptHidingEnabled == null) {
webConfig = getWebConfiguration(webConfig);
isScriptHidingEnabled =
(null == webConfig)
? BooleanWebContextInitParameter.EnableJSStyleHiding.getDefaultValue()
: webConfig.isOptionEnabled(BooleanWebContextInitParameter.EnableJSStyleHiding);
}
if (isScriptInAttributeValueEnabled == null) {
webConfig = getWebConfiguration(webConfig);
isScriptInAttributeValueEnabled =
(null == webConfig)
? BooleanWebContextInitParameter.EnableScriptInAttributeValue.getDefaultValue()
: webConfig.isOptionEnabled(
BooleanWebContextInitParameter.EnableScriptInAttributeValue);
}
if (disableUnicodeEscaping == null) {
webConfig = getWebConfiguration(webConfig);
disableUnicodeEscaping =
WebConfiguration.DisableUnicodeEscaping.getByValue(
(null == webConfig)
? WebConfiguration.WebContextInitParameter.DisableUnicodeEscaping
.getDefaultValue()
: webConfig.getOptionValue(
WebConfiguration.WebContextInitParameter.DisableUnicodeEscaping));
if (disableUnicodeEscaping == null) {
disableUnicodeEscaping = WebConfiguration.DisableUnicodeEscaping.False;
}
}
// and store them for later use
this.isScriptHidingEnabled = isScriptHidingEnabled;
this.isScriptInAttributeValueEnabled = isScriptInAttributeValueEnabled;
this.disableUnicodeEscaping = disableUnicodeEscaping;
this.attributesBuffer = new FastStringWriter(128);
// Check the character encoding
if (!HtmlUtils.validateEncoding(encoding)) {
throw new IllegalArgumentException(
MessageUtils.getExceptionMessageString(MessageUtils.ENCODING_ERROR_MESSAGE_ID));
}
String charsetName = encoding.toUpperCase();
switch (disableUnicodeEscaping) {
case True:
// html escape noting (except the dangerous characters like "<>'" etc
escapeUnicode = false;
escapeIso = false;
break;
case False:
// html escape any non-ascii character
escapeUnicode = true;
escapeIso = true;
break;
case Auto:
// is stream capable of rendering unicode, do not escape
escapeUnicode = !HtmlUtils.isUTFencoding(charsetName);
// is stream capable of rendering unicode or iso-8859-1, do not escape
escapeIso =
!HtmlUtils.isISO8859_1encoding(charsetName) && !HtmlUtils.isUTFencoding(charsetName);
break;
}
}