private boolean intersect(
byte[] lowerInclusiveKey, byte[] upperExclusiveKey, List<List<KeyRange>> newSlots) {
boolean lowerUnbound = (lowerInclusiveKey.length == 0);
Arrays.fill(position, 0);
isDone = false;
int startPos = 0;
int lastSlot = slots.size() - 1;
if (!lowerUnbound) {
// Find the position of the first slot of the lower range
ptr.set(lowerInclusiveKey);
schema.first(ptr, 0, ValueBitSet.EMPTY_VALUE_BITSET);
startPos = ScanUtil.searchClosestKeyRangeWithUpperHigherThanPtr(slots.get(0), ptr, 0);
// Lower range is past last upper range of first slot, so cannot possibly be in range
if (startPos >= slots.get(0).size()) {
return false;
}
}
boolean upperUnbound = (upperExclusiveKey.length == 0);
int endPos = slots.get(0).size() - 1;
if (!upperUnbound) {
// Find the position of the first slot of the upper range
ptr.set(upperExclusiveKey);
schema.first(ptr, 0, ValueBitSet.EMPTY_VALUE_BITSET);
endPos = ScanUtil.searchClosestKeyRangeWithUpperHigherThanPtr(slots.get(0), ptr, startPos);
// Upper range lower than first lower range of first slot, so cannot possibly be in range
if (endPos == 0
&& Bytes.compareTo(upperExclusiveKey, slots.get(0).get(0).getLowerRange()) <= 0) {
return false;
}
// Past last position, so we can include everything from the start position
if (endPos >= slots.get(0).size()) {
upperUnbound = true;
endPos = slots.get(0).size() - 1;
}
}
if (!lowerUnbound) {
position[0] = startPos;
navigate(lowerInclusiveKey, 0, lowerInclusiveKey.length, Terminate.AFTER);
if (filterAllRemaining()) {
return false;
}
}
if (upperUnbound) {
if (newSlots != null) {
newSlots.add(slots.get(0).subList(startPos, endPos + 1));
newSlots.addAll(slots.subList(1, slots.size()));
}
return true;
}
int[] lowerPosition = Arrays.copyOf(position, position.length);
// Navigate to the upperExclusiveKey, but not past it
ReturnCode endCode = navigate(upperExclusiveKey, 0, upperExclusiveKey.length, Terminate.AT);
if (endCode == ReturnCode.INCLUDE) {
setStartKey();
// If the upperExclusiveKey is equal to the start key, we've gone one position too far, since
// our upper key is exclusive. In that case, go to the previous key
if (Bytes.compareTo(
startKey, 0, startKeyLength, upperExclusiveKey, 0, upperExclusiveKey.length)
== 0
&& (previousPosition(lastSlot) < 0 || position[0] < lowerPosition[0])) {
// If by backing up one position we have an empty range, then return
return false;
}
} else if (endCode == ReturnCode.SEEK_NEXT_USING_HINT) {
// The upperExclusive key is smaller than the slots stored in the position. Check if it's the
// same position
// as the slots for lowerInclusive. If so, there is no intersection.
if (Arrays.equals(lowerPosition, position)) {
return false;
}
}
// Copy inclusive all positions
for (int i = 0; i <= lastSlot; i++) {
List<KeyRange> newRanges =
slots.get(i).subList(lowerPosition[i], Math.min(position[i] + 1, slots.get(i).size()));
if (newRanges.isEmpty()) {
return false;
}
if (newSlots != null) {
newSlots.add(newRanges);
}
if (position[i] > lowerPosition[i]) {
if (newSlots != null) {
newSlots.addAll(slots.subList(i + 1, slots.size()));
}
break;
}
}
return true;
}
private int setKey(Bound bound, byte[] key, int keyOffset, int slotStartIndex) {
return ScanUtil.setKey(
schema, slots, position, bound, key, keyOffset, slotStartIndex, position.length);
}
public MutationPlan compile(UpsertStatement upsert, List<Object> binds) throws SQLException {
final PhoenixConnection connection = statement.getConnection();
ConnectionQueryServices services = connection.getQueryServices();
final int maxSize =
services
.getProps()
.getInt(
QueryServices.MAX_MUTATION_SIZE_ATTRIB,
QueryServicesOptions.DEFAULT_MAX_MUTATION_SIZE);
final ColumnResolver resolver = FromCompiler.getResolver(upsert, connection);
final TableRef tableRef = resolver.getTables().get(0);
PTable table = tableRef.getTable();
if (table.getType() == PTableType.VIEW) {
throw new ReadOnlyTableException("Mutations not allowed for a view (" + tableRef + ")");
}
Scan scan = new Scan();
final StatementContext context =
new StatementContext(connection, resolver, binds, upsert.getBindCount(), scan);
// Setup array of column indexes parallel to values that are going to be set
List<ColumnName> columnNodes = upsert.getColumns();
List<PColumn> allColumns = table.getColumns();
int[] columnIndexesToBe;
int[] pkSlotIndexesToBe;
PColumn[] targetColumns;
// Allow full row upsert if no columns or only dynamic one are specified and values count match
if (columnNodes.isEmpty()
|| columnNodes.size() == upsert.getTable().getDynamicColumns().size()) {
columnIndexesToBe = new int[allColumns.size()];
pkSlotIndexesToBe = new int[columnIndexesToBe.length];
targetColumns = new PColumn[columnIndexesToBe.length];
int j = table.getBucketNum() == null ? 0 : 1; // Skip over the salting byte.
for (int i = 0; i < allColumns.size(); i++) {
columnIndexesToBe[i] = i;
targetColumns[i] = allColumns.get(i);
if (SchemaUtil.isPKColumn(allColumns.get(i))) {
pkSlotIndexesToBe[i] = j++;
}
}
} else {
columnIndexesToBe = new int[columnNodes.size()];
pkSlotIndexesToBe = new int[columnIndexesToBe.length];
targetColumns = new PColumn[columnIndexesToBe.length];
Arrays.fill(
columnIndexesToBe,
-1); // TODO: necessary? So we'll get an AIOB exception if it's not replaced
Arrays.fill(
pkSlotIndexesToBe,
-1); // TODO: necessary? So we'll get an AIOB exception if it's not replaced
BitSet pkColumnsSet = new BitSet(table.getPKColumns().size());
for (int i = 0; i < columnNodes.size(); i++) {
ColumnName colName = columnNodes.get(i);
ColumnRef ref =
resolver.resolveColumn(null, colName.getFamilyName(), colName.getColumnName());
columnIndexesToBe[i] = ref.getColumnPosition();
targetColumns[i] = ref.getColumn();
if (SchemaUtil.isPKColumn(ref.getColumn())) {
pkColumnsSet.set(pkSlotIndexesToBe[i] = ref.getPKSlotPosition());
}
}
int i = table.getBucketNum() == null ? 0 : 1;
for (; i < table.getPKColumns().size(); i++) {
PColumn pkCol = table.getPKColumns().get(i);
if (!pkColumnsSet.get(i)) {
if (!pkCol.isNullable()) {
throw new ConstraintViolationException(
table.getName().getString()
+ "."
+ pkCol.getName().getString()
+ " may not be null");
}
}
}
}
List<ParseNode> valueNodes = upsert.getValues();
QueryPlan plan = null;
RowProjector projector = null;
int nValuesToSet;
boolean runOnServer = false;
if (valueNodes == null) {
SelectStatement select = upsert.getSelect();
assert (select != null);
TableRef selectTableRef = FromCompiler.getResolver(select, connection).getTables().get(0);
boolean sameTable = tableRef.equals(selectTableRef);
// Pass scan through if same table in upsert and select so that projection is computed
// correctly
QueryCompiler compiler =
new QueryCompiler(connection, 0, sameTable ? scan : new Scan(), targetColumns);
plan = compiler.compile(select, binds);
projector = plan.getProjector();
nValuesToSet = projector.getColumnCount();
// Cannot auto commit if doing aggregation or topN or salted
// Salted causes problems because the row may end up living on a different region
runOnServer =
plan.getGroupBy() == null
&& sameTable
&& select.getOrderBy().isEmpty()
&& table.getBucketNum() == null;
} else {
nValuesToSet = valueNodes.size();
}
final QueryPlan queryPlan = plan;
// Resize down to allow a subset of columns to be specifiable
if (columnNodes.isEmpty()) {
columnIndexesToBe = Arrays.copyOf(columnIndexesToBe, nValuesToSet);
pkSlotIndexesToBe = Arrays.copyOf(pkSlotIndexesToBe, nValuesToSet);
}
if (nValuesToSet != columnIndexesToBe.length) {
throw new SQLExceptionInfo.Builder(SQLExceptionCode.UPSERT_COLUMN_NUMBERS_MISMATCH)
.setMessage(
"Numbers of columns: "
+ columnIndexesToBe.length
+ ". Number of values: "
+ nValuesToSet)
.build()
.buildException();
}
final int[] columnIndexes = columnIndexesToBe;
final int[] pkSlotIndexes = pkSlotIndexesToBe;
// TODO: break this up into multiple functions
////////////////////////////////////////////////////////////////////
// UPSERT SELECT
/////////////////////////////////////////////////////////////////////
if (valueNodes == null) {
/* We can run the upsert in a coprocessor if:
* 1) the into table matches from table
* 2) the select query isn't doing aggregation
* 3) autoCommit is on
* 4) not topN
* Otherwise, run the query to pull the data from the server
* and populate the MutationState (upto a limit).
*/
final boolean isAutoCommit = connection.getAutoCommit();
runOnServer &= isAutoCommit;
////////////////////////////////////////////////////////////////////
// UPSERT SELECT run server-side (maybe)
/////////////////////////////////////////////////////////////////////
if (runOnServer) {
// At most this array will grow bigger by the number of PK columns
int[] allColumnsIndexes = Arrays.copyOf(columnIndexes, columnIndexes.length + nValuesToSet);
int[] reverseColumnIndexes = new int[table.getColumns().size()];
List<Expression> projectedExpressions =
Lists.newArrayListWithExpectedSize(reverseColumnIndexes.length);
Arrays.fill(reverseColumnIndexes, -1);
for (int i = 0; i < nValuesToSet; i++) {
projectedExpressions.add(projector.getColumnProjector(i).getExpression());
reverseColumnIndexes[columnIndexes[i]] = i;
}
/*
* Order projected columns and projected expressions with PK columns
* leading order by slot position
*/
int offset = table.getBucketNum() == null ? 0 : 1;
for (int i = 0; i < table.getPKColumns().size() - offset; i++) {
PColumn column = table.getPKColumns().get(i + offset);
int pos = reverseColumnIndexes[column.getPosition()];
if (pos == -1) {
// Last PK column may be fixed width and nullable
// We don't want to insert a null expression b/c
// it's not valid to set a fixed width type to null.
if (column.getDataType().isFixedWidth()) {
continue;
}
// Add literal null for missing PK columns
pos = projectedExpressions.size();
Expression literalNull = LiteralExpression.newConstant(null, column.getDataType());
projectedExpressions.add(literalNull);
allColumnsIndexes[pos] = column.getPosition();
}
// Swap select expression at pos with i
Collections.swap(projectedExpressions, i, pos);
// Swap column indexes and reverse column indexes too
int tempPos = allColumnsIndexes[i];
allColumnsIndexes[i] = allColumnsIndexes[pos];
allColumnsIndexes[pos] = tempPos;
reverseColumnIndexes[tempPos] = reverseColumnIndexes[i];
reverseColumnIndexes[i] = i;
}
// If any pk slots are changing, be conservative and don't run this server side.
// If the row ends up living in a different region, we'll get an error otherwise.
for (int i = 0; i < table.getPKColumns().size(); i++) {
PColumn column = table.getPKColumns().get(i);
Expression source = projectedExpressions.get(i);
if (source == null
|| !source.equals(
new ColumnRef(tableRef, column.getPosition()).newColumnExpression())) {
// TODO: we could check the region boundaries to see if the pk will still be in it.
runOnServer = false; // bail on running server side, since PK may be changing
break;
}
}
////////////////////////////////////////////////////////////////////
// UPSERT SELECT run server-side
/////////////////////////////////////////////////////////////////////
if (runOnServer) {
// Iterate through columns being projected
List<PColumn> projectedColumns =
Lists.newArrayListWithExpectedSize(projectedExpressions.size());
for (int i = 0; i < projectedExpressions.size(); i++) {
// Must make new column if position has changed
PColumn column = allColumns.get(allColumnsIndexes[i]);
projectedColumns.add(column.getPosition() == i ? column : new PColumnImpl(column, i));
}
// Build table from projectedColumns
PTable projectedTable =
PTableImpl.makePTable(
table.getName(),
table.getType(),
table.getTimeStamp(),
table.getSequenceNumber(),
table.getPKName(),
table.getBucketNum(),
projectedColumns);
// Remove projection of empty column, since it can lead to problems when building another
// projection
// using this same scan. TODO: move projection code to a later stage, like
// QueryPlan.newScanner to
// prevent having to do this.
ScanUtil.removeEmptyColumnFamily(context.getScan(), table);
List<AliasedNode> select =
Collections.<AliasedNode>singletonList(
NODE_FACTORY.aliasedNode(
null,
NODE_FACTORY.function(
CountAggregateFunction.NORMALIZED_NAME, LiteralParseNode.STAR)));
// Ignore order by - it has no impact
final RowProjector aggProjector =
ProjectionCompiler.getRowProjector(
context, select, false, GroupBy.EMPTY_GROUP_BY, OrderBy.EMPTY_ORDER_BY, null);
/*
* Transfer over PTable representing subset of columns selected, but all PK columns.
* Move columns setting PK first in pkSlot order, adding LiteralExpression of null for any missing ones.
* Transfer over List<Expression> for projection.
* In region scan, evaluate expressions in order, collecting first n columns for PK and collection non PK in mutation Map
* Create the PRow and get the mutations, adding them to the batch
*/
scan.setAttribute(
UngroupedAggregateRegionObserver.UPSERT_SELECT_TABLE,
UngroupedAggregateRegionObserver.serialize(projectedTable));
scan.setAttribute(
UngroupedAggregateRegionObserver.UPSERT_SELECT_EXPRS,
UngroupedAggregateRegionObserver.serialize(projectedExpressions));
final QueryPlan aggPlan =
new AggregatePlan(
context,
tableRef,
projector,
null,
GroupBy.EMPTY_GROUP_BY,
false,
null,
OrderBy.EMPTY_ORDER_BY);
return new MutationPlan() {
@Override
public PhoenixConnection getConnection() {
return connection;
}
@Override
public ParameterMetaData getParameterMetaData() {
return context.getBindManager().getParameterMetaData();
}
@Override
public MutationState execute() throws SQLException {
Scanner scanner = aggPlan.getScanner();
ResultIterator iterator = scanner.iterator();
try {
Tuple row = iterator.next();
ImmutableBytesWritable ptr = context.getTempPtr();
final long mutationCount =
(Long) aggProjector.getColumnProjector(0).getValue(row, PDataType.LONG, ptr);
return new MutationState(maxSize, connection) {
@Override
public long getUpdateCount() {
return mutationCount;
}
};
} finally {
iterator.close();
}
}
@Override
public ExplainPlan getExplainPlan() throws SQLException {
List<String> queryPlanSteps = aggPlan.getExplainPlan().getPlanSteps();
List<String> planSteps =
Lists.newArrayListWithExpectedSize(queryPlanSteps.size() + 1);
planSteps.add("UPSERT ROWS");
planSteps.addAll(queryPlanSteps);
return new ExplainPlan(planSteps);
}
};
}
}
////////////////////////////////////////////////////////////////////
// UPSERT SELECT run client-side
/////////////////////////////////////////////////////////////////////
final int batchSize = Math.min(connection.getMutateBatchSize(), maxSize);
return new MutationPlan() {
@Override
public PhoenixConnection getConnection() {
return connection;
}
@Override
public ParameterMetaData getParameterMetaData() {
return context.getBindManager().getParameterMetaData();
}
@Override
public MutationState execute() throws SQLException {
byte[][] values = new byte[columnIndexes.length][];
Scanner scanner = queryPlan.getScanner();
int estSize = scanner.getEstimatedSize();
int rowCount = 0;
Map<ImmutableBytesPtr, Map<PColumn, byte[]>> mutation =
Maps.newHashMapWithExpectedSize(estSize);
ResultSet rs = new PhoenixResultSet(scanner, statement);
PTable table = tableRef.getTable();
PColumn column;
while (rs.next()) {
for (int i = 0; i < values.length; i++) {
column = table.getColumns().get(columnIndexes[i]);
byte[] byteValue = rs.getBytes(i + 1);
Object value = rs.getObject(i + 1);
int rsPrecision = rs.getMetaData().getPrecision(i + 1);
Integer precision = rsPrecision == 0 ? null : rsPrecision;
int rsScale = rs.getMetaData().getScale(i + 1);
Integer scale = rsScale == 0 ? null : rsScale;
// If ColumnModifier from expression in SELECT doesn't match the
// column being projected into then invert the bits.
if (column.getColumnModifier() == ColumnModifier.SORT_DESC) {
byte[] tempByteValue = Arrays.copyOf(byteValue, byteValue.length);
byteValue =
ColumnModifier.SORT_DESC.apply(byteValue, tempByteValue, 0, byteValue.length);
}
// We are guaranteed that the two column will have compatible types,
// as we checked that before.
if (!column
.getDataType()
.isSizeCompatible(
column.getDataType(),
value,
byteValue,
precision,
column.getMaxLength(),
scale,
column.getScale())) {
throw new SQLExceptionInfo.Builder(SQLExceptionCode.DATA_INCOMPATIBLE_WITH_TYPE)
.setColumnName(column.getName().getString())
.build()
.buildException();
}
values[i] =
column
.getDataType()
.coerceBytes(
byteValue,
value,
column.getDataType(),
precision,
scale,
column.getMaxLength(),
column.getScale());
}
setValues(values, pkSlotIndexes, columnIndexes, table, mutation);
rowCount++;
// Commit a batch if auto commit is true and we're at our batch size
if (isAutoCommit && rowCount % batchSize == 0) {
MutationState state = new MutationState(tableRef, mutation, 0, maxSize, connection);
connection.getMutationState().join(state);
connection.commit();
mutation.clear();
}
}
// If auto commit is true, this last batch will be committed upon return
return new MutationState(
tableRef, mutation, rowCount / batchSize * batchSize, maxSize, connection);
}
@Override
public ExplainPlan getExplainPlan() throws SQLException {
List<String> queryPlanSteps = queryPlan.getExplainPlan().getPlanSteps();
List<String> planSteps = Lists.newArrayListWithExpectedSize(queryPlanSteps.size() + 1);
planSteps.add("UPSERT SELECT");
planSteps.addAll(queryPlanSteps);
return new ExplainPlan(planSteps);
}
};
}
////////////////////////////////////////////////////////////////////
// UPSERT VALUES
/////////////////////////////////////////////////////////////////////
int nodeIndex = 0;
// Allocate array based on size of all columns in table,
// since some values may not be set (if they're nullable).
UpsertValuesCompiler expressionBuilder = new UpsertValuesCompiler(context);
final byte[][] values = new byte[nValuesToSet][];
for (ParseNode valueNode : valueNodes) {
if (!valueNode.isConstant()) {
throw new SQLExceptionInfo.Builder(SQLExceptionCode.VALUE_IN_UPSERT_NOT_CONSTANT)
.build()
.buildException();
}
PColumn column = allColumns.get(columnIndexes[nodeIndex]);
expressionBuilder.setColumn(column);
LiteralExpression literalExpression = (LiteralExpression) valueNode.accept(expressionBuilder);
byte[] byteValue = literalExpression.getBytes();
if (literalExpression.getDataType() != null) {
// If ColumnModifier from expression in SELECT doesn't match the
// column being projected into then invert the bits.
if (literalExpression.getColumnModifier() != column.getColumnModifier()) {
byte[] tempByteValue = Arrays.copyOf(byteValue, byteValue.length);
byteValue = ColumnModifier.SORT_DESC.apply(byteValue, tempByteValue, 0, byteValue.length);
}
if (!literalExpression
.getDataType()
.isCoercibleTo(column.getDataType(), literalExpression.getValue())) {
throw new TypeMismatchException(
literalExpression.getDataType(),
column.getDataType(),
"expression: " + literalExpression.toString() + " in column " + column);
}
if (!column
.getDataType()
.isSizeCompatible(
literalExpression.getDataType(),
literalExpression.getValue(),
byteValue,
literalExpression.getMaxLength(),
column.getMaxLength(),
literalExpression.getScale(),
column.getScale())) {
throw new SQLExceptionInfo.Builder(SQLExceptionCode.DATA_INCOMPATIBLE_WITH_TYPE)
.setColumnName(column.getName().getString())
.setMessage("value=" + literalExpression.toString())
.build()
.buildException();
}
}
byteValue =
column
.getDataType()
.coerceBytes(
byteValue,
literalExpression.getValue(),
literalExpression.getDataType(),
literalExpression.getMaxLength(),
literalExpression.getScale(),
column.getMaxLength(),
column.getScale());
values[nodeIndex] = byteValue;
nodeIndex++;
}
return new MutationPlan() {
@Override
public PhoenixConnection getConnection() {
return connection;
}
@Override
public ParameterMetaData getParameterMetaData() {
return context.getBindManager().getParameterMetaData();
}
@Override
public MutationState execute() {
Map<ImmutableBytesPtr, Map<PColumn, byte[]>> mutation = Maps.newHashMapWithExpectedSize(1);
setValues(values, pkSlotIndexes, columnIndexes, tableRef.getTable(), mutation);
return new MutationState(tableRef, mutation, 0, maxSize, connection);
}
@Override
public ExplainPlan getExplainPlan() throws SQLException {
return new ExplainPlan(Collections.singletonList("PUT SINGLE ROW"));
}
};
}
