/**
* (Re-)Adds the ports to the node of a component, having at least one port with a non-loop edge.
* The ports are added as the direct neighbor of a port they are connected to via an edge.
*
* @param component The component whose ports have to get re-added.
*/
public void addComponentWithNonLoopEdges(final ConnectedSelfLoopComponent component) {
// the node we are working on
final LNode node = component.getNode();
// Set of all ports of the components that are hidden. Initially all ports that CAN be hidden.
final Set<LPort> hiddenPorts = Sets.newHashSet(component.getHidablePorts());
// Iterator holding all ports that already have a portSide specified. Initially these are
// all ports with an non-loop edge connected to them. While processing the elements, we will
// add new ports to this Iterator. So we need a ListIterator.
final ListIterator<LPort> portsWithSideIter =
Lists.newLinkedList(component.getNonLoopPorts()).listIterator();
while (portsWithSideIter.hasNext()) {
final LPort portWithSide = portsWithSideIter.next();
if (portWithSide.getOutgoingEdges().isEmpty()) {
// inbound port
for (final LEdge edgeWithHiddenPort : portWithSide.getIncomingEdges()) {
final LPort hiddenPort = edgeWithHiddenPort.getSource();
if (hiddenPorts.contains(hiddenPort)) {
final ListIterator<LPort> nodePortIter = node.getPorts().listIterator();
LPort portOnNode = nodePortIter.next();
// find the port with side ...
while (!portOnNode.equals(portWithSide)) {
portOnNode = nodePortIter.next();
}
// ... and add the hidden port on it's right side
nodePortIter.add(hiddenPort);
portsWithSideIter.add(hiddenPort);
setSideOfPort(hiddenPort, portWithSide.getSide());
// ensure the next element will be our new added element
portsWithSideIter.previous();
portsWithSideIter.previous();
hiddenPorts.remove(hiddenPort);
}
}
} else {
// outbound port
for (final LEdge edgeWithHiddenPort : portWithSide.getOutgoingEdges()) {
final LPort hiddenPort = edgeWithHiddenPort.getTarget();
if (hiddenPorts.contains(hiddenPort)) {
final ListIterator<LPort> nodePortIter = node.getPorts().listIterator();
LPort portOnNode = nodePortIter.next();
// find the port with side ...
while (!portOnNode.equals(portWithSide)) {
portOnNode = nodePortIter.next();
}
// ... and add the hidden port on it's left side
nodePortIter.previous();
nodePortIter.add(hiddenPort);
portsWithSideIter.add(hiddenPort);
setSideOfPort(hiddenPort, portWithSide.getSide());
// ensure the next element will be our new added element
portsWithSideIter.previous();
portsWithSideIter.previous();
hiddenPorts.remove(hiddenPort);
}
}
}
}
}
/**
* Post-process the balanced placement by moving linear segments where obvious improvements can be
* made.
*
* @param layeredGraph the layered graph
*/
private void postProcess(final LGraph layeredGraph) {
// process each linear segment independently
for (LinearSegment segment : linearSegments) {
double minRoomAbove = Integer.MAX_VALUE, minRoomBelow = Integer.MAX_VALUE;
for (LNode node : segment.nodes) {
double roomAbove, roomBelow;
int index = node.getIndex();
// determine the amount by which the linear segment can be moved up without overlap
if (index > 0) {
LNode neighbor = node.getLayer().getNodes().get(index - 1);
float spacing = spacings.getVerticalSpacing(node, neighbor);
roomAbove =
node.getPosition().y
- node.getMargin().top
- (neighbor.getPosition().y
+ neighbor.getSize().y
+ neighbor.getMargin().bottom
+ spacing);
} else {
roomAbove = node.getPosition().y - node.getMargin().top;
}
minRoomAbove = Math.min(roomAbove, minRoomAbove);
// determine the amount by which the linear segment can be moved down without
// overlap
if (index < node.getLayer().getNodes().size() - 1) {
LNode neighbor = node.getLayer().getNodes().get(index + 1);
float spacing = spacings.getVerticalSpacing(node, neighbor);
roomBelow =
neighbor.getPosition().y
- neighbor.getMargin().top
- (node.getPosition().y + node.getSize().y + node.getMargin().bottom + spacing);
} else {
roomBelow = 2 * node.getPosition().y;
}
minRoomBelow = Math.min(roomBelow, minRoomBelow);
}
double minDisplacement = Integer.MAX_VALUE;
boolean foundPlace = false;
// determine the minimal displacement that would make one incoming edge straight
LNode firstNode = segment.nodes.get(0);
for (LPort target : firstNode.getPorts()) {
double pos = firstNode.getPosition().y + target.getPosition().y + target.getAnchor().y;
for (LEdge edge : target.getIncomingEdges()) {
LPort source = edge.getSource();
double d =
source.getNode().getPosition().y
+ source.getPosition().y
+ source.getAnchor().y
- pos;
if (Math.abs(d) < Math.abs(minDisplacement)
&& Math.abs(d) < (d < 0 ? minRoomAbove : minRoomBelow)) {
minDisplacement = d;
foundPlace = true;
}
}
}
// determine the minimal displacement that would make one outgoing edge straight
LNode lastNode = segment.nodes.get(segment.nodes.size() - 1);
for (LPort source : lastNode.getPorts()) {
double pos = lastNode.getPosition().y + source.getPosition().y + source.getAnchor().y;
for (LEdge edge : source.getOutgoingEdges()) {
LPort target = edge.getTarget();
double d =
target.getNode().getPosition().y
+ target.getPosition().y
+ target.getAnchor().y
- pos;
if (Math.abs(d) < Math.abs(minDisplacement)
&& Math.abs(d) < (d < 0 ? minRoomAbove : minRoomBelow)) {
minDisplacement = d;
foundPlace = true;
}
}
}
// if such a displacement could be found, apply it to the whole linear segment
if (foundPlace && minDisplacement != 0) {
for (LNode node : segment.nodes) {
node.getPosition().y += minDisplacement;
}
}
}
}
/**
* Calculate the force acting on the given linear segment. The force is stored in the segment's
* deflection field.
*
* @param segment the linear segment whose force is to be calculated
* @param incoming whether incoming edges should be considered
* @param outgoing whether outgoing edges should be considered
* @param deflectionDampening factor by which deflections are dampened
*/
private void calcDeflection(
final LinearSegment segment,
final boolean incoming,
final boolean outgoing,
final double deflectionDampening) {
double segmentDeflection = 0;
int nodeWeightSum = 0;
for (LNode node : segment.nodes) {
double nodeDeflection = 0;
int edgeWeightSum = 0;
int inputPrio = incoming ? node.getProperty(INPUT_PRIO) : Integer.MIN_VALUE;
int outputPrio = outgoing ? node.getProperty(OUTPUT_PRIO) : Integer.MIN_VALUE;
int minPrio = Math.max(inputPrio, outputPrio);
// Calculate force for every port/edge
for (LPort port : node.getPorts()) {
double portpos = node.getPosition().y + port.getPosition().y + port.getAnchor().y;
if (outgoing) {
for (LEdge edge : port.getOutgoingEdges()) {
LPort otherPort = edge.getTarget();
LNode otherNode = otherPort.getNode();
if (segment != linearSegments[otherNode.id]) {
int otherPrio =
Math.max(otherNode.getProperty(INPUT_PRIO), otherNode.getProperty(OUTPUT_PRIO));
int prio = edge.getProperty(InternalProperties.PRIORITY);
if (prio >= minPrio && prio >= otherPrio) {
nodeDeflection +=
otherNode.getPosition().y
+ otherPort.getPosition().y
+ otherPort.getAnchor().y
- portpos;
edgeWeightSum++;
}
}
}
}
if (incoming) {
for (LEdge edge : port.getIncomingEdges()) {
LPort otherPort = edge.getSource();
LNode otherNode = otherPort.getNode();
if (segment != linearSegments[otherNode.id]) {
int otherPrio =
Math.max(otherNode.getProperty(INPUT_PRIO), otherNode.getProperty(OUTPUT_PRIO));
int prio = edge.getProperty(InternalProperties.PRIORITY);
if (prio >= minPrio && prio >= otherPrio) {
nodeDeflection +=
otherNode.getPosition().y
+ otherPort.getPosition().y
+ otherPort.getAnchor().y
- portpos;
edgeWeightSum++;
}
}
}
}
}
// Avoid division by zero
if (edgeWeightSum > 0) {
segmentDeflection += nodeDeflection / edgeWeightSum;
nodeWeightSum++;
}
}
if (nodeWeightSum > 0) {
segment.deflection = deflectionDampening * segmentDeflection / nodeWeightSum;
segment.weight = nodeWeightSum;
} else {
segment.deflection = 0;
segment.weight = 0;
}
}
/**
* Put a node into the given linear segment and check for following parts of a long edge.
*
* @param node the node to put into the linear segment
* @param segment a linear segment
* @return {@code true} if the given node was not already part of another segment and was thus
* added to the given segment.
*/
private boolean fillSegment(final LNode node, final LinearSegment segment) {
NodeType nodeType = node.getType();
// handle initial big nodes as big node type
if (node.getProperty(InternalProperties.BIG_NODE_INITIAL)) {
nodeType = NodeType.BIG_NODE;
}
if (node.id >= 0) {
// The node is already part of another linear segment
return false;
} else if (segment.nodeType != null
&& (nodeType == NodeType.BIG_NODE && nodeType != segment.nodeType)) {
// Big nodes are not allowed to share a linear segment with other dummy nodes
return false;
} else {
// Add the node to the given linear segment
node.id = segment.id;
segment.nodes.add(node);
}
segment.nodeType = nodeType;
if (nodeType == NodeType.LONG_EDGE
|| nodeType == NodeType.NORTH_SOUTH_PORT
|| nodeType == NodeType.BIG_NODE) {
// This is a LONG_EDGE, NORTH_SOUTH_PORT or BIG_NODE dummy; check if any of its
// successors are of one of these types too. If so, we can form a linear segment
// with one of them. (not with more than one, though)
// Note 1: LONG_EDGES and NORTH_SOUTH_PORTs can share a common linear segment
// Note 2: we must take care not to make a segment out of nodes that are in the same layer
// Note 3: for BIG_NODEs also the first BIG_NODE_INITIAL which is no actual dummy node has
// to be considered here
for (LPort sourcePort : node.getPorts()) {
for (LPort targetPort : sourcePort.getSuccessorPorts()) {
LNode targetNode = targetPort.getNode();
NodeType targetNodeType = targetNode.getType();
if (node.getLayer() != targetNode.getLayer()) {
if (nodeType == NodeType.BIG_NODE) {
// current AND the next node are BIG_NODE dummies
if (targetNodeType == NodeType.BIG_NODE) {
if (fillSegment(targetNode, segment)) {
// We just added another node to this node's linear segment.
// That's quite enough.
return true;
}
}
} else {
// current no bignode and next node is LONG_EDGE and NORTH_SOUTH_PORT
if (targetNodeType == NodeType.LONG_EDGE
|| targetNodeType == NodeType.NORTH_SOUTH_PORT) {
if (fillSegment(targetNode, segment)) {
// We just added another node to this node's linear segment.
// That's quite enough.
return true;
}
}
}
}
}
}
}
return true;
}
/**
* Sorts the linear segments of the given layered graph by finding a topological ordering in the
* corresponding segment ordering graph.
*
* @param layeredGraph layered graph to process
* @return a sorted array of linear segments
*/
private LinearSegment[] sortLinearSegments(final LGraph layeredGraph) {
// set the identifier and input / output priority for all nodes
List<LinearSegment> segmentList = Lists.newArrayList();
for (Layer layer : layeredGraph) {
for (LNode node : layer) {
node.id = -1;
int inprio = Integer.MIN_VALUE, outprio = Integer.MIN_VALUE;
for (LPort port : node.getPorts()) {
for (LEdge edge : port.getIncomingEdges()) {
int prio = edge.getProperty(InternalProperties.PRIORITY);
inprio = Math.max(inprio, prio);
}
for (LEdge edge : port.getOutgoingEdges()) {
int prio = edge.getProperty(InternalProperties.PRIORITY);
outprio = Math.max(outprio, prio);
}
}
node.setProperty(INPUT_PRIO, inprio);
node.setProperty(OUTPUT_PRIO, outprio);
}
}
// create linear segments for the layered graph, ignoring odd port side dummies
int nextLinearSegmentID = 0;
for (Layer layer : layeredGraph) {
for (LNode node : layer) {
// Test for the node ID; calls to fillSegment(...) may have caused the node ID
// to be != -1.
if (node.id < 0) {
LinearSegment segment = new LinearSegment();
segment.id = nextLinearSegmentID++;
fillSegment(node, segment);
segmentList.add(segment);
}
}
}
// create and initialize segment ordering graph
List<List<LinearSegment>> outgoingList = Lists.newArrayListWithCapacity(segmentList.size());
List<Integer> incomingCountList = Lists.newArrayListWithCapacity(segmentList.size());
for (int i = 0; i < segmentList.size(); i++) {
outgoingList.add(new ArrayList<LinearSegment>());
incomingCountList.add(0);
}
// create edges for the segment ordering graph
createDependencyGraphEdges(layeredGraph, segmentList, outgoingList, incomingCountList);
// turn lists into arrays
LinearSegment[] segments = segmentList.toArray(new LinearSegment[segmentList.size()]);
@SuppressWarnings("unchecked")
List<LinearSegment>[] outgoing = outgoingList.toArray(new List[outgoingList.size()]);
int[] incomingCount = new int[incomingCountList.size()];
for (int i = 0; i < incomingCount.length; i++) {
incomingCount[i] = incomingCountList.get(i);
}
// gather the sources of the segment ordering graph
int nextRank = 0;
List<LinearSegment> noIncoming = Lists.newArrayList();
for (int i = 0; i < segments.length; i++) {
if (incomingCount[i] == 0) {
noIncoming.add(segments[i]);
}
}
// find a topological ordering of the segment ordering graph
int[] newRanks = new int[segments.length];
while (!noIncoming.isEmpty()) {
LinearSegment segment = noIncoming.remove(0);
newRanks[segment.id] = nextRank++;
while (!outgoing[segment.id].isEmpty()) {
LinearSegment target = outgoing[segment.id].remove(0);
incomingCount[target.id]--;
if (incomingCount[target.id] == 0) {
noIncoming.add(target);
}
}
}
// apply the new ordering to the array of linear segments
linearSegments = new LinearSegment[segments.length];
for (int i = 0; i < segments.length; i++) {
assert outgoing[i].isEmpty();
LinearSegment ls = segments[i];
int rank = newRanks[i];
linearSegments[rank] = ls;
ls.id = rank;
for (LNode node : ls.nodes) {
node.id = rank;
}
}
return linearSegments;
}
/**
* Removes all sides from the list of available sides, that already have an port places on it.
* Use to make sure no loops will be places on sides with ports containing non-loop edges.
*/
public void removeOccupiedSides() {
for (final LPort port : node.getPorts()) {
loopSides.removeSide(LoopSide.fromPortSides(port.getSide()));
}
}
/**
* Sets the portSide of the port as specified. Also calculates the x or y coordinate that can be
* derived from the portSide.
*
* @param port The port to work on.
* @param side The portSide to assign.
* @return The portSide that was assigned.
*/
private static void setSideOfPort(final LPort port, final PortSide side) {
switch (side) {
case EAST:
port.setSide(PortSide.EAST);
// adapt the anchor so edges are attached center right
port.getAnchor().x = port.getSize().x;
port.getAnchor().y = port.getSize().y / 2;
break;
case WEST:
port.setSide(PortSide.WEST);
// adapt the anchor so edges are attached center left
port.getAnchor().x = 0;
port.getAnchor().y = port.getSize().y / 2;
break;
case NORTH:
port.setSide(PortSide.NORTH);
// adapt the anchor so edges are attached top center
port.getAnchor().x = port.getSize().x / 2;
port.getAnchor().y = 0;
break;
case SOUTH:
port.setSide(PortSide.SOUTH);
// adapt the anchor so edges are attached bottom center
port.getAnchor().x = port.getSize().x / 2;
port.getAnchor().y = port.getSize().y;
break;
}
}
