コード例 #1
0
ファイル: RouteResolver.java プロジェクト: Rikatouka/net.jxta
  /**
   * cleanup any edge peers when trying to forward an SRDI query so we are guaranteed to the best of
   * our knowledge that the peer is a rendezvous. This is not perfect, as it may take time for the
   * peerview to converge but at least we can remove any peers that is not a rendezvous.
   */
  protected Vector cleanupAnyEdges(String src, Vector results) {
    Vector clean = new Vector(results.size());
    PeerID pid = null;
    // put the peerview as a vector of PIDs
    Vector rpvId = srdi.getGlobalPeerView();

    // remove any peers not in the current peerview
    // these peers may be gone or have become edges
    for (int i = 0; i < results.size(); i++) {
      pid = (PeerID) results.elementAt(i);
      // eliminate the src of the query so we don't resend
      // the query to whom send it to us
      if (src.equals(pid.toString())) {
        continue;
      }

      // remove the local also, so we don't send to ourself
      if (localPeerId.equals(pid)) {
        continue;
      }

      if (rpvId.contains(pid)) { // ok that's a good RDV to the best
        if (LOG.isEnabledFor(Level.DEBUG)) {
          LOG.debug("valid rdv for SRDI forward " + pid);
        }
        clean.add(pid);
      } else {
        // cleanup our SRDI cache for that peer
        srdiIndex.remove(pid);
      }
    }
    return clean;
  }
コード例 #2
0
ファイル: RouteResolver.java プロジェクト: Rikatouka/net.jxta
  /**
   * remove a SRDI cache entry
   *
   * @param peer peer id we send the request, null for sending to all
   * @param id peer id of the SRDI route that we want to remove from the cache
   */
  protected void removeSrdi(String peer, PeerID id) {

    SrdiMessage srdiMsg;

    try {
      srdiMsg =
          new SrdiMessageImpl(
              group.getPeerID(),
              1, // only one hop
              "route",
              id.toString(),
              null, // 0 means remove
              new Long(0).longValue());
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("sending a router SRDI message delete route " + id);
      }
      if (peer == null) {
        PeerID destPeer = srdi.getReplicaPeer(id.toString());

        // don't push anywhere if we do not have replica
        // or we are trying to push to ouself
        if (destPeer != null && (!destPeer.equals(localPeerId))) {
          srdi.pushSrdi(destPeer, srdiMsg);
        }
      }
    } catch (Exception e) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("Removing srdi entry failed", e);
      }
    }
  }
コード例 #3
0
ファイル: RouteResolver.java プロジェクト: Rikatouka/net.jxta
  /*
   * push all srdi entries to the rednezvous SRDI cache (new connection)
   *@param all if true push all entries, otherwise just deltas
   */
  protected void pushSrdi(String peer, boolean all) {

    SrdiMessage srdiMsg;
    Vector routeIx = new Vector();

    // 10182002tra:Route info don't expire unless the peer disappears
    // This approach is used to limit the SRDI traffic. The key
    // point here is that SRDI is used to tell a peer that another
    // has a route to the destination it is looking for. The information
    // that SRDI cache is not so much the specific route info but rather
    // the fact that a peer has knowledge of a route to another peer
    // We don't want to update the SRDI cache on every route update.
    // The SRDI cache will be flushed when the peer disconnect from
    // the rendezvous.

    // We cannot support concurrent modification of the map while we
    // do that: we must synchronize...
    for (Iterator each = router.getAllRoutedRouteAddresses(); each.hasNext(); ) {
      PeerID pid = router.addr2pid((EndpointAddress) each.next());
      SrdiMessage.Entry entry = new SrdiMessage.Entry(pid.toString(), "", Long.MAX_VALUE);

      routeIx.addElement(entry);
    }

    try {

      // check if we have anything to send
      if (routeIx.size() == 0) {
        return;
      }

      srdiMsg =
          new SrdiMessageImpl(
              group.getPeerID(),
              1, // one hop
              "route",
              routeIx);

      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("Sending a SRDI messsage of [All=" + all + "] routes");
      }
      // this will replicate entry to the  SRDI replica peers
      srdi.replicateEntries(srdiMsg);

    } catch (Exception e) {
      if (LOG.isEnabledFor(Level.WARN)) {
        LOG.warn("SRDI Push failed", e);
      }
    }
  }
コード例 #4
0
ファイル: RouteResolver.java プロジェクト: Rikatouka/net.jxta
  /*
   * push srdi entries to the SRDI rendezvous cache
   * @param all if true push all entries, otherwise just deltas
   */
  protected void pushSrdi(ID peer, PeerID id) {

    SrdiMessage srdiMsg;

    try {
      srdiMsg =
          new SrdiMessageImpl(
              group.getPeerID(),
              1, // only one hop
              "route",
              id.toString(),
              null,
              new Long(Long.MAX_VALUE).longValue()); // maximum expiration
      // 10182002tra:Route info don't expire unless the peer disappears
      // This approach is used to limit the SRDI traffic. The key
      // point here is that SRDI is used to tell a peer that another
      // has a route to the destination it is looking for. The information
      // that SRDI cache is not so much the specific route info but rather
      // the fact that a peer has knowledge of a route to another peer
      // We don't want to update the SRDI cache on every route update.
      // The SRDI cache will be flushed when the peer disconnect from
      // the rendezvous.
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("sending a router SRDI message add route " + id);
      }
      if (peer == null) {
        PeerID destPeer = srdi.getReplicaPeer(id.toString());

        peer = destPeer;
      }
      // don't push anywhere if we do not have a replica
      // or we are trying to send the query to ourself
      if (!localPeerId.equals(peer)) {
        srdi.pushSrdi(peer, srdiMsg);
      }
    } catch (Exception e) {
      if (LOG.isEnabledFor(Level.WARN)) {
        LOG.warn("SRDI push failed", e);
      }
    }
  }
コード例 #5
0
  /**
   * Create a new blocking output pipe
   *
   * @param group The peergroup context.
   * @param pAdv advertisement for the pipe we are supporting.
   * @param peerID the destination <code>PeerID</code>.
   * @param route the destination route.
   * @throws IOException for failures creating a pipe to the destination peer.
   */
  public BlockingWireOutputPipe(
      PeerGroup group, PipeAdvertisement pAdv, PeerID peerID, RouteAdvertisement route)
      throws IOException {
    this.pAdv = pAdv;
    this.group = group;
    this.endpoint = group.getEndpointService();
    destination =
        new EndpointAddress(
            "jxta", peerID.getUniqueValue().toString(), "PipeService", pAdv.getID().toString());
    this.route = route;

    checkMessenger();

    if (Logging.SHOW_INFO && LOG.isLoggable(Level.INFO)) {
      LOG.info("Created output pipe for " + getPipeID());
    }
  }
コード例 #6
0
 public void serializeTo(Element element) throws DocumentSerializationException {
   if (peerID != null) {
     DocumentSerializableUtilities.addString(element, "peerID", peerID.toString());
   }
   if (state != null) {
     DocumentSerializableUtilities.addString(element, "state", state);
   }
   if (transitionTime != 0) {
     DocumentSerializableUtilities.addLong(element, "transitionTime", transitionTime);
   }
   if (lastLeaseRenewalTime != 0) {
     DocumentSerializableUtilities.addLong(element, "lastLeaseRenewalTime", lastLeaseRenewalTime);
   }
   if (lease != 0) {
     DocumentSerializableUtilities.addLong(element, "lease", lease);
   }
   if (numConnects != 0) {
     DocumentSerializableUtilities.addInt(element, "numConnects", numConnects);
   }
   if (numLeaseRenewals != 0) {
     DocumentSerializableUtilities.addInt(element, "numLeaseRenewals", numLeaseRenewals);
   }
   if (numDisconnects != 0) {
     DocumentSerializableUtilities.addInt(element, "numDisconnects", numDisconnects);
   }
   if (numConnectionsRefused != 0) {
     DocumentSerializableUtilities.addInt(element, "numConnectionsRefused", numConnectionsRefused);
   }
   if (numErrorsAddingClient != 0) {
     DocumentSerializableUtilities.addInt(element, "numErrorsAddingClient", numErrorsAddingClient);
   }
   if (numUnableToRespondToConnectRequest != 0) {
     DocumentSerializableUtilities.addInt(
         element, "numUnableToRespondToConnectRequest", numUnableToRespondToConnectRequest);
   }
   if (totalTimeConnected != 0) {
     DocumentSerializableUtilities.addLong(element, "totalTimeConnected", totalTimeConnected);
   }
 }
コード例 #7
0
ファイル: RouteResolver.java プロジェクト: Rikatouka/net.jxta
  /**
   * Process the Query, and generate response
   *
   * @param query the query to process
   */
  public int processQuery(ResolverQueryMsg query) {

    if (!useRouteResolver) { // Route resolver disabled
      return ResolverService.OK;
    }

    if (LOG.isEnabledFor(Level.DEBUG)) {
      LOG.debug("processQuery starts");
    }

    RouteQuery routeQuery = null;
    Reader ip = null;

    try {
      ip = new StringReader(query.getQuery());

      StructuredTextDocument asDoc =
          (StructuredTextDocument)
              StructuredDocumentFactory.newStructuredDocument(MimeMediaType.XMLUTF8, ip);

      routeQuery = new RouteQuery(asDoc);

    } catch (Throwable e) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("Malformed Route query ", e);
      }
      return ResolverService.OK;
    } finally {
      try {
        if (null != ip) {
          ip.close();
          ip = null;
        }
      } catch (Throwable ignored) {;
      }
    }

    PeerID pId = routeQuery.getDestPeerID();

    if (LOG.isEnabledFor(Level.DEBUG)) {
      LOG.debug("processQuery: looking for route to " + pId);
    }

    RouteAdvertisement srcRoute = routeQuery.getSrcRoute();
    List badHops = routeQuery.getBadHops();

    if (LOG.isEnabledFor(Level.DEBUG)) {
      if (badHops != null) {
        LOG.debug("processQuery: bad Hops");
        for (int i = 0; i < badHops.size(); i++) {
          LOG.debug("processQuery:   :" + ((PeerID) badHops.get(i)).toString());
        }
      }
    }
    // if our source route is not null, then publish it
    if (srcRoute != null) {
      if (!(srcRoute.getDestPeerID()).equals(localPeerId)) {
        // This is not our own peer adv so we must not keep it
        // longer than its expiration time.
        try {
          if (LOG.isEnabledFor(Level.DEBUG)) {
            LOG.debug("processQuery: publishing sender route info " + srcRoute.getDestPeerID());
          }

          // we only need to publish this route if
          // we don't know about it yet
          // XXX: here is where we could be more conservative and use isNormallyReachable() instead,
          // thus excluding
          // incoming messengers.
          if ((!router.isLocalRoute(router.pid2addr(srcRoute.getDestPeerID())))
              && (!router.isRoutedRoute(router.pid2addr(srcRoute.getDestPeerID())))) {
            routeCM.publishRoute(srcRoute);
          }
        } catch (Exception e) {
          if (LOG.isEnabledFor(Level.DEBUG)) {
            LOG.debug("Could not publish Route Adv from query - discard", e);
          }
          return ResolverService.OK;
        }
      }
    } else {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("No src Route in route query - discard ");
      }
      return ResolverService.OK;
    }

    if (pId == null) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("Malformed route query request, no PeerId - discard");
      }
      return ResolverService.OK;
    }

    // We have more luck with that one because, since it is part of OUR
    // message, and not part of the resolver protocol, it is in OUR
    // format.
    EndpointAddress qReqAddr = router.pid2addr(pId);

    RouteAdvertisement route = null;

    // check if this peer has a route to the destination
    // requested
    boolean found = false;

    if (qReqAddr.equals(localPeerAddr)) {
      found = true;
      // return the route that is my local route
      route = router.getMyLocalRoute();
    } else {
      // only rendezvous can respond to route requests
      // if not we are generating too much traffic
      // XXX: here is where we could be more conservative and use isNormallyReachable() instead,
      // thus excluding
      // incoming messengers.
      if (router.isLocalRoute(qReqAddr)) {
        if (LOG.isEnabledFor(Level.DEBUG)) {
          LOG.debug("processQuery: peer has direct route to destination ");
        }
        // we should set the route to something  :-)

        found = true;

        // this peer has a direct route to the destination
        // return the short route advertisement we know for this peer
        // (For us it is zero hop, and we advertise ourself as the routing
        // peer in the response. The stiching is done by whoever gets that
        // response). May be there are more than one hop advertised in-there...
        // alternate routing peers...should we leave them ?
        // For now, we keep the full dest, but wack the hops.

        route =
            (RouteAdvertisement)
                AdvertisementFactory.newAdvertisement(RouteAdvertisement.getAdvertisementType());

        AccessPointAdvertisement ap =
            (AccessPointAdvertisement)
                AdvertisementFactory.newAdvertisement(
                    AccessPointAdvertisement.getAdvertisementType());

        ap.setPeerID(pId);
        route.setDest(ap);

      } else {

        route = router.getRoute(qReqAddr, false);
        if (route != null) {
          found = true;
          // check if we were given some bad hops info
          // and see if the found route contains
          // any of these bad hops. In that case, we need
          // to mark this route as bad
          for (int i = 0; i < badHops.size(); i++) {

            // destination is known to be bad
            if (router.addr2pid(qReqAddr).equals(((PeerID) badHops.get(i)))) {
              processBadRoute((PeerID) badHops.get(i), route);
              found = false;
              break;
            }

            if (route.containsHop((PeerID) badHops.get(i))) {
              if (LOG.isEnabledFor(Level.DEBUG)) {
                LOG.debug(
                    "processQuery: peer has bad route due to "
                        + ((PeerID) badHops.get(i)).toString());
              }
              processBadRoute((PeerID) badHops.get(i), route);
              found = false;
              break;
            }
          }
        }
      }
    }

    if (!found) {
      // discard the request if we are not a rendezvous
      // else forward to the next peers
      if (!group.isRendezvous()) {
        if (LOG.isEnabledFor(Level.DEBUG)) {
          LOG.debug("discard query forwarding as not a rendezvous");
        }
        return ResolverService.OK;
      }

      // did not find a route, check our srdi cache
      // make sure we protect against out of sync
      // SRDI index

      // srdi forwarding is only involved once the Index entry has
      // been found and we forwarded the resolver query. Afterward a
      // normal walk proceeds from the initial SRDI index pointing
      // rdv. This is done to protect against potential loopback
      // entries in the SRDI cache index due to out of sync peerview
      // and index.
      if (query.getHopCount() < 2) {

        // check local SRDI cache to see if we have the entry
        // we look for 10 entries, will pickup one randomly
        Vector results = srdiIndex.query("route", "DstPID", pId.toString(), 10);

        if (results.size() > 0) {
          if (LOG.isEnabledFor(Level.DEBUG)) {
            LOG.debug("processQuery srdiIndex lookup match :" + results.size());
          }

          // remove any non-rdv peers to avoid sending
          // to a non-rdv peers and garbage collect the SRDI
          // index in the process
          Vector clean = cleanupAnyEdges(query.getSrc(), results);

          if (clean.size() > 0) {

            if (LOG.isEnabledFor(Level.DEBUG)) {
              LOG.debug("found an srdi entry forwarding query to SRDI peer");
            }

            // The purpose of incrementing the hopcount
            // when an SRDI index match is found (we got a
            // pointer to a rdv that should have the route) is to
            // restrict any further forwarding. The increment
            // count is only done when a matching SRDI index is
            // found. Not when the replica is selected as we
            // still need to forward the query.  This restriction
            // is purposelly done to avoid too many longjumps
            // within a walk.
            query.incrementHopCount();

            // Note: this forwards the query to 1 peer randomly
            // selected from the result
            srdi.forwardQuery(clean, query, 1);

            // tell the resolver no further action is needed.
            return ResolverService.OK;
          }
        }
      }

      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("did not find a route or SRDI index");
      }

      // force a walk
      return ResolverService.Repropagate;
    }

    // we found a route send the response
    try {
      if (route == null) {
        if (LOG.isEnabledFor(Level.DEBUG)) {
          LOG.debug("we should have had a route at this point");
        }
        return ResolverService.OK;
      }

      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("processQuery: we have a route build route response" + route.display());
      }

      RouteAdvertisement myRoute = router.getMyLocalRoute();

      // make sure we initialized our local
      // route info as we will need it to respond. We may
      // not have our route if we are still
      // waiting for a relay connection.
      if (myRoute == null) {
        return ResolverService.OK;
      }

      RouteResponse routeResponse = new RouteResponse();

      routeResponse.setDestRoute(route);
      routeResponse.setSrcRoute(myRoute);

      if (routeResponse == null) {
        if (LOG.isEnabledFor(Level.DEBUG)) {
          LOG.debug("error creating route response");
        }
        return ResolverService.OK;
      }

      // construct a response from the query
      ResolverResponseMsg res = query.makeResponse();

      res.setCredential(credentialDoc);
      res.setResponse(routeResponse.toString());

      resolver.sendResponse(query.getSrc(), res);
      return ResolverService.OK;

    } catch (Exception ee) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("processQuery: error while processing query ", ee);
      }
      return ResolverService.OK;
    }
  }
コード例 #8
0
ファイル: RouteResolver.java プロジェクト: Rikatouka/net.jxta
  /**
   * bad route, so let's remove everything we have so we can start from scratch. We are maintaining
   * a bad route up to DEFAULT_ROUTE experition after that we consider it to be ok to retry the same
   * route We are removing both the route and peer advertisement to force a new route query
   *
   * @param src peer that reply with the NACK route info
   * @param dest original route information
   */
  private void processBadRoute(PeerID badHop, RouteAdvertisement dest) {

    EndpointAddress addr = router.pid2addr(dest.getDestPeerID());

    if (addr == null) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("remove bad route has a bad route info - discard");
      }
      return;
    }

    if (LOG.isEnabledFor(Level.DEBUG)) {
      LOG.debug("remove bad route info for dest " + dest.display());
      if (badHop != null) {
        LOG.debug("remove bad route bad hop " + badHop);
      }
    }

    try {

      // check first that we still have the same route, we may already
      // using a new route
      RouteAdvertisement currentRoute = router.getRoute(addr, false);

      if (currentRoute == null) { // we already cleanup the route info
        return;
      }

      // check if we still have the old bad route, we may have
      // already updated the route
      if (!currentRoute.equals(dest)) {

        // check if the bad hop is not the destination
        // if it is then we still have a bad route
        if (!(badHop.equals(router.addr2pid(addr)))) {
          // check if the new route may still contain the bad hop
          // the known bad hop is the hop after the src peer that
          // responded with a NACK route
          // In this case we also consider the route bad
          if (badHop != null) { // this should really not be null
            if (!currentRoute.containsHop(badHop)) {
              return; // we are ok
            } else {
              if (LOG.isEnabledFor(Level.DEBUG)) {
                LOG.debug("current route is bad because it contains known bad hop" + badHop);
              }
            }
          } else { // we could get the bad hop, so consider the route ok
            return;
          }
        } else {
          if (LOG.isEnabledFor(Level.DEBUG)) {
            LOG.debug("current route is bad because it contains known bad destination" + badHop);
          }
        }
      }

      // keep the bad one in a cache table so we don't retry them
      // right away. We use the default route timeout
      BadRoute badRoute = ((BadRoute) router.getBadRoute(addr));

      if (badRoute != null) {

        Long nextTry = badRoute.getExpiration();

        if (nextTry.longValue()
            > System.currentTimeMillis()) { // nothing to do the information is still valid
        } else {
          // It is ancient knowlege update it
          nextTry = new Long(TimeUtils.toAbsoluteTimeMillis(BADROUTE_EXPIRATION));
          badRoute.setExpiration(nextTry);
        }

        List badHops = badRoute.getHops();

        // check if we have to add a new bad hop
        // to our bad route
        if (badHop != null) {
          if (!badHops.contains(badHop)) {
            badHops.add(badHop);
            // new expiration
            nextTry = new Long(TimeUtils.toAbsoluteTimeMillis(BADROUTE_EXPIRATION));
            badRoute.setHops(badHops);
            badRoute.setExpiration(nextTry);
          }
        }

        router.setBadRoute(addr, badRoute);
        return;
      } else {
        // create a new NACK route entry
        Vector badHops = new Vector();

        if (badHop != null) {
          badHops.add(badHop);
        }

        badRoute =
            new BadRoute(
                dest, new Long(TimeUtils.toAbsoluteTimeMillis(BADROUTE_EXPIRATION)), badHops);
        router.setBadRoute(addr, badRoute);
      }

      // remove route from route CM
      routeCM.flushRoute(addr);

      // let's remove the remote route info from the routing table
      // we do this after we removed the entries from the CM
      // to avoid that another thread is putting back the entry
      router.removeRoute(addr);

    } catch (Exception ex) {
      if (LOG.isEnabledFor(Level.WARN)) {
        LOG.warn("exception during bad route removal", ex);
      }
    }
  }
コード例 #9
0
ファイル: RouteResolver.java プロジェクト: Rikatouka/net.jxta
  /**
   * issue a new route discovery resolver request
   *
   * @param peer the destination as a logical enpoint address
   */
  protected void findRoute(EndpointAddress peer) {

    RouteAdvertisement myRoute = router.getMyLocalRoute();

    // No need to pursue further if we haven't
    // initialize our own route as responding
    // peers are not going to be able to respond to us.
    if (myRoute == null) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("Cannot issue a find route if we don't know our own route");
      }
      return;
    }

    if (LOG.isEnabledFor(Level.DEBUG)) {
      LOG.debug("Find route for peer = " + peer);
    }

    try {
      // create a new RouteQuery message
      RouteQuery doc = null;

      // check if we have some bad route information
      // for that peer, in that case pass the bad hop count
      BadRoute badRoute;

      badRoute = (BadRoute) router.getBadRoute(peer);

      if (badRoute != null) {
        // ok we have a bad route
        // pass the bad hops info as part of the query
        if (LOG.isEnabledFor(Level.DEBUG)) {
          LOG.debug("findRoute sends query: known bad Hops" + badRoute.display());
        }
        doc = new RouteQuery(router.addr2pid(peer), myRoute, badRoute.getHops());
      } else {
        doc = new RouteQuery(router.addr2pid(peer), myRoute, null);
      }

      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("Sending query for peer : " + peer);
      }

      ResolverQuery query =
          new ResolverQuery(
              routerSName, credentialDoc, localPeerId.toString(), doc.toString(), qid++);

      // only run SRDI if we are a rendezvous
      if (group.isRendezvous()) {

        // check where to send the query via SRDI
        Vector results = null;

        if (srdiIndex != null) {
          // try to find a least 10 entries, will pick up one
          // randomly. This will protect against retry. It is
          // likely that a number of RDV will know about a route
          results = srdiIndex.query("route", "DstPID", router.addr2pid(peer).toString(), 10);

          if (results != null && results.size() > 0) {
            // use SRDI to send the query
            // remove any non rdv peers from the candidate list
            // and garbage collect the index in the process
            Vector clean = cleanupAnyEdges(query.getSrc(), results);

            if (clean.size() > 0) {
              // The purpose of incrementing the hopcount
              // when an SRDI index match is found (we got a
              // pointer to a rdv that should have the route) is to
              // restrict any further forwarding. The increment
              // count is only done when a matching SRDI index is
              // found. Not when the replica is selected as we
              // still need to forward the query.  This restriction
              // is purposelly done to avoid too many longjumps
              // within a walk.
              query.incrementHopCount();

              srdi.forwardQuery(clean, query, 1);
              if (LOG.isEnabledFor(Level.DEBUG)) {
                LOG.debug("found an srdi entry forwarding query to SRDI peer");
              }
              return;
            }
          } else {
            // it is not in our cache, look for the replica peer
            // we need to send the query
            PeerID destPeer = srdi.getReplicaPeer(router.addr2pid(peer).toString());

            if (destPeer != null && !destPeer.equals(localPeerId)) {
              // don't push anywhere if we do not have a replica
              // or we are trying to push to ourself
              if (LOG.isEnabledFor(Level.DEBUG)) {
                LOG.debug("processQuery srdiIndex DHT forward :" + destPeer);
              }

              srdi.forwardQuery(destPeer.toString(), query);
              return;
            }
          }
        }
      }

      // if we reach that point then we just use the resolver walk
      resolver = group.getResolverService();
      if (resolver != null) {
        resolver.sendQuery(null, query);
        if (LOG.isEnabledFor(Level.DEBUG)) {
          LOG.debug("find route query sent");
        }
      } else {
        if (LOG.isEnabledFor(Level.WARN)) {
          LOG.warn("cannot get the resolver service");
        }
      }

    } catch (Exception ee) {
      if (LOG.isEnabledFor(Level.WARN)) {
        LOG.warn("Exception in findRoute", ee);
      }
    }
  }
コード例 #10
0
ファイル: RouteResolver.java プロジェクト: Rikatouka/net.jxta
  /**
   * process an SRDI message request
   *
   * @param message SRDI resolver message
   */
  public boolean processSrdi(ResolverSrdiMsg message) {

    String value;
    SrdiMessage srdiMsg;

    try {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("Received a SRDI messsage in group" + group.getPeerGroupName());
      }

      XMLDocument asDoc =
          (XMLDocument)
              StructuredDocumentFactory.newStructuredDocument(
                  MimeMediaType.XMLUTF8, new StringReader(message.getPayload()));

      srdiMsg = new SrdiMessageImpl(asDoc);
    } catch (Exception e) {
      // we don't understand this msg, let's skip it
      if (LOG.isEnabledFor(Level.WARN)) {
        LOG.warn("corrupted SRDI message", e);
      }

      return false;
    }

    PeerID pid = srdiMsg.getPeerID();

    // filter messages that contain messages
    // about the local peer, so we don't enter
    // self-reference
    if (pid.equals(localPeerId)) {
      return false;
    }

    Iterator eachEntry = srdiMsg.getEntries().iterator();

    while (eachEntry.hasNext()) {
      SrdiMessage.Entry entry = (SrdiMessage.Entry) eachEntry.next();

      // drop any information  about ourself
      if (entry.key.equals(localPeerId.toString())) {
        continue;
      }
      value = entry.value;
      if (value == null) {
        value = "";
      }

      // Expiration of entries is taken care of by SrdiIdex, so we always add
      // FIXME hamada 03142003
      // All routes are added under the secondary key 'DstPID', it would be more correct to
      // Specify it in the message, but since versioning is not yet supported the following is
      // acceptable, since it is localized
      srdiIndex.add(srdiMsg.getPrimaryKey(), "DstPID", entry.key, pid, entry.expiration);
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug(
            "Primary Key ["
                + srdiMsg.getPrimaryKey()
                + "] key [DstPID]"
                + " value ["
                + entry.key
                + "] exp ["
                + entry.expiration
                + "]");
      }
    }

    return true;
  }
コード例 #11
0
ファイル: RouteResolver.java プロジェクト: Rikatouka/net.jxta
  /**
   * Return a route error in case a route was found to be invalid as the current hop cannot find a
   * way to forward the message to the destination or any other hops in the forward part of the
   * route. In that case a negative route response is forwarded to the orginal source of the
   * message. Now of course we do not have any way to guarantee that the NACK message will be
   * received by the sender, but the best we can do is to try :-)
   *
   * <p>we send a query ID to NACKROUTE_QUERYID to indicate this is a bad Route
   *
   * @param src original source of the message
   * @param dest original destination of the message
   */
  protected void generateNACKRoute(PeerID src, PeerID dest, Vector origHops) {

    // As long as the group is partially initialized, do not bother
    // trying to send NACKS. We can't: it just causes NPEs.
    if (resolver == null) {
      return;
    }

    if (LOG.isEnabledFor(Level.DEBUG)) {
      LOG.debug("generate NACK Route response " + src);
    }

    // check first, if we are not already in process of looking for a
    // route to the destination peer of the NACK. We should not try to
    // send a NACK to that destination at that point as this will block
    // our incoming processing thread while it is looking for a route to
    // that destination. If there a no pending route requests to that
    // destination then we can go ahead an attempt to send the NACK. At
    // the maximum we should have only one thread block while looking for
    // a specific destination. When we find a route to the destination,
    // the next NACK processing will be sent.

    if (router.isPendingRouteQuery(router.pid2addr(src))) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("drop NACK due to pending route discovery " + src);
      }
      return;
    }

    // Generate a route response
    RouteAdvertisement route =
        (RouteAdvertisement)
            AdvertisementFactory.newAdvertisement(RouteAdvertisement.getAdvertisementType());

    AccessPointAdvertisement ap =
        (AccessPointAdvertisement)
            AdvertisementFactory.newAdvertisement(AccessPointAdvertisement.getAdvertisementType());

    ap.setPeerID(dest);
    route.setDest(ap);
    route.setHops(origHops);

    // set the the route of the peer that
    // detected the bad route
    RouteAdvertisement routeSrc =
        (RouteAdvertisement)
            AdvertisementFactory.newAdvertisement(RouteAdvertisement.getAdvertisementType());

    AccessPointAdvertisement apSrc =
        (AccessPointAdvertisement)
            AdvertisementFactory.newAdvertisement(AccessPointAdvertisement.getAdvertisementType());

    apSrc.setPeerID((PeerID) localPeerId);
    routeSrc.setDest(apSrc);

    RouteResponse routeResponse = new RouteResponse();

    routeResponse.setDestRoute(route);
    routeResponse.setSrcRoute(routeSrc);

    if (routeResponse == null) {
      if (LOG.isEnabledFor(Level.DEBUG)) {
        LOG.debug("error creating route NACKresponse");
      }
      return;
    }

    ResolverResponse res =
        new ResolverResponse(
            routerSName,
            credentialDoc,
            NACKROUTE_QUERYID, // mean NACKRoute
            routeResponse.toString());

    // send the NACK response back to the originator
    resolver.sendResponse(src.toString(), res);
  }
コード例 #12
0
  public static void main(String[] args) {

    try {

      // Removing any existing configuration?
      Tools.CheckForExistingConfigurationDeletion(Name, ConfigurationFile);

      // Creation of network manager
      NetworkManager MyNetworkManager =
          new NetworkManager(NetworkManager.ConfigMode.EDGE, Name, ConfigurationFile.toURI());

      // Retrieving the network configurator
      NetworkConfigurator MyNetworkConfigurator = MyNetworkManager.getConfigurator();

      // Checking if RendezVous_Adelaide_At_One_End should be a seed
      MyNetworkConfigurator.clearRendezvousSeeds();
      String TheSeed =
          "tcp://"
              + InetAddress.getLocalHost().getHostAddress()
              + ":"
              + RendezVous_Adelaide_At_One_End.TcpPort;
      Tools.CheckForRendezVousSeedAddition(Name, TheSeed, MyNetworkConfigurator);

      // Setting Configuration
      MyNetworkConfigurator.setTcpPort(TcpPort);
      MyNetworkConfigurator.setTcpEnabled(true);
      MyNetworkConfigurator.setTcpIncoming(true);
      MyNetworkConfigurator.setTcpOutgoing(true);

      // Setting the Peer ID
      Tools.PopInformationMessage(Name, "Setting the peer ID to :\n\n" + PID.toString());
      MyNetworkConfigurator.setPeerID(PID);

      // Starting the JXTA network
      Tools.PopInformationMessage(
          Name,
          "Start the JXTA network and to wait for a rendezvous connection with\n"
              + RendezVous_Adelaide_At_One_End.Name
              + " for maximum 2 minutes");
      PeerGroup NetPeerGroup = MyNetworkManager.startNetwork();

      // Disabling any rendezvous autostart
      NetPeerGroup.getRendezVousService().setAutoStart(false);

      if (MyNetworkManager.waitForRendezvousConnection(120000)) {
        Tools.popConnectedRendezvous(NetPeerGroup.getRendezVousService(), Name);
      } else {
        Tools.PopInformationMessage(Name, "Did not connect to a rendezvous");
      }

      // Preparing the listener and Creating the BiDiPipe
      PipeMsgListener MyListener = new Edge_Quinisela_At_The_Other_End();
      JxtaBiDiPipe MyBiDiPipe =
          new JxtaBiDiPipe(
              NetPeerGroup,
              RendezVous_Adelaide_At_One_End.GetPipeAdvertisement(),
              30000,
              MyListener);

      if (MyBiDiPipe.isBound()) {

        Tools.PopInformationMessage(Name, "Bidirectional pipe created!");

        // Sending a hello message !!!
        Message MyMessage = new Message();
        StringMessageElement MyStringMessageElement =
            new StringMessageElement("HelloElement", "Hello from " + Name, null);
        MyMessage.addMessageElement("DummyNameSpace", MyStringMessageElement);

        MyBiDiPipe.sendMessage(MyMessage);

        // Sleeping for 10 seconds
        Tools.GoToSleep(10000);

        // Sending a goodbye message !!!
        MyMessage = new Message();
        MyStringMessageElement =
            new StringMessageElement("HelloElement", "Goodbye from " + Name, null);
        MyMessage.addMessageElement("DummyNameSpace", MyStringMessageElement);

        MyBiDiPipe.sendMessage(MyMessage);

        // Sleeping for 10 seconds
        Tools.GoToSleep(10000);
      }

      // Closing the bidipipe
      MyBiDiPipe.close();

      // Stopping the network
      Tools.PopInformationMessage(Name, "Stop the JXTA network");
      MyNetworkManager.stopNetwork();

    } catch (IOException Ex) {

      // Raised when access to local file and directories caused an error
      Tools.PopErrorMessage(Name, Ex.toString());

    } catch (PeerGroupException Ex) {

      // Raised when the net peer group could not be created
      Tools.PopErrorMessage(Name, Ex.toString());
    }
  }
コード例 #13
0
  /**
   * {@inheritDoc}
   *
   * @param encodeAs Description of the Parameter
   * @return The document value
   */
  public Document getDocument(MimeMediaType encodeAs) {
    StructuredDocument adv = (StructuredDocument) super.getDocument(encodeAs);

    if (hasALoop()) {
      throw new IllegalStateException("I won't write a doc for a route with a loop");
    }

    PeerID pid = getDestPeerID();
    AccessPointAdvertisement dest = getDest();

    if ((null != pid) && (null != dest) && (null != dest.getPeerID())) {
      if (!pid.equals(dest.getPeerID())) {
        throw new IllegalStateException(
            "Destination peer id and destination access point adv don't refer to the same peer");
      }
    }

    // HACK Backwards Compatibility
    if ((null == pid) && (null != dest)) {
      pid = dest.getPeerID();
    }

    if (pid != null) {
      Element e0 = adv.createElement(DEST_PID_TAG, pid.toString());

      adv.appendChild(e0);
    }

    if (dest != null) {
      // create the copy without the PID
      AccessPointAdvertisement ap =
          (AccessPointAdvertisement)
              AdvertisementFactory.newAdvertisement(
                  AccessPointAdvertisement.getAdvertisementType());

      ap.setEndpointAddresses(dest.getVectorEndpointAddresses());

      StructuredTextDocument xptDoc = (StructuredTextDocument) ap.getDocument(encodeAs);

      Element e1 = adv.createElement("Dst");

      adv.appendChild(e1);
      StructuredDocumentUtils.copyElements(adv, e1, xptDoc);
    }

    // only include hops if we have some
    if (getHops().hasMoreElements()) {

      Element e2 = adv.createElement("Hops");

      adv.appendChild(e2);

      for (Enumeration e = getHops(); e.hasMoreElements(); ) {
        AccessPointAdvertisement hop = (AccessPointAdvertisement) e.nextElement();

        if (hop != null) {
          StructuredTextDocument xptDoc = (StructuredTextDocument) hop.getDocument(encodeAs);

          StructuredDocumentUtils.copyElements(adv, e2, xptDoc);
        }
      }
    }

    return adv;
  }