Exemple #1
0
  /*
   * (non-Javadoc)
   *
   * @see math.geom2d.OrientedCurve2D#windingAngle(math.geom2d.Point2D)
   */
  public double windingAngle(Point2D point) {
    Point2D p1 = point(0);
    Point2D p2 = point(abs(angleExtent));

    // compute angle of point with extreme points
    double angle1 = Angle2D.horizontalAngle(point, p1);
    double angle2 = Angle2D.horizontalAngle(point, p2);

    // test on which 'side' of the arc the point lie
    boolean b1 = (new StraightLine2D(p1, p2)).isInside(point);
    boolean b2 = ellipse.isInside(point);

    if (angleExtent > 0) {
      if (b1 || b2) { // inside of ellipse arc
        if (angle2 > angle1) return angle2 - angle1;
        else return 2 * PI - angle1 + angle2;
      } else { // outside of ellipse arc
        if (angle2 > angle1) return angle2 - angle1 - 2 * PI;
        else return angle2 - angle1;
      }
    } else {
      if (!b1 || b2) {
        if (angle1 > angle2) return angle2 - angle1;
        else return angle2 - angle1 - 2 * PI;
      } else {
        if (angle1 > angle2) return angle2 - angle1 + 2 * PI;
        else return angle2 - angle1;
      }
    }
  }
Exemple #2
0
  /*
   * (non-Javadoc)
   *
   * @see math.geom2d.Curve2D#position(math.geom2d.Point2D)
   */
  public double position(Point2D point) {
    double angle = Angle2D.horizontalAngle(ellipse.center(), point);
    if (this.containsAngle(angle))
      if (angleExtent > 0) return Angle2D.formatAngle(angle - startAngle);
      else return Angle2D.formatAngle(startAngle - angle);

    // If the point is not contained in the arc, return NaN.
    return Double.NaN;
  }
 /** Returns a new CircleArc2D. t0 and t1 are position on circle. */
 public CircleArc2D subCurve(double t0, double t1) {
   double startAngle, extent;
   if (this.direct) {
     startAngle = t0;
     extent = Angle2D.formatAngle(t1 - t0);
   } else {
     extent = -Angle2D.formatAngle(t1 - t0);
     startAngle = Angle2D.formatAngle(-t0);
   }
   return new CircleArc2D(this, startAngle, extent);
 }
Exemple #4
0
  /** Returns a new EllipseArc2D. */
  public EllipseArc2D subCurve(double t0, double t1) {
    // convert position to angle
    t0 = Angle2D.formatAngle(startAngle + t0);
    t1 = Angle2D.formatAngle(startAngle + t1);

    // check bounds of angles
    if (!Angle2D.containsAngle(startAngle, startAngle + angleExtent, t0, angleExtent > 0))
      t0 = startAngle;
    if (!Angle2D.containsAngle(startAngle, startAngle + angleExtent, t1, angleExtent > 0))
      t1 = angleExtent;

    // create new arc
    return new EllipseArc2D(ellipse, t0, t1, angleExtent > 0);
  }
Exemple #5
0
  public double project(Point2D point) {
    double angle = ellipse.project(point);

    // Case of an angle contained in the ellipse arc
    if (this.containsAngle(angle)) {
      if (angleExtent > 0) return Angle2D.formatAngle(angle - startAngle);
      else return Angle2D.formatAngle(startAngle - angle);
    }

    // return either 0 or T1, depending on which extremity is closer.
    double d1 = this.firstPoint().distance(point);
    double d2 = this.lastPoint().distance(point);
    return d1 < d2 ? 0 : abs(angleExtent);
  }
  /**
   * Computes the projection position of the point on the circle, by computing angle with
   * horizonrtal
   */
  public double project(Point2D point) {
    double xp = point.x() - this.xc;
    double yp = point.y() - this.yc;

    // compute angle
    return Angle2D.horizontalAngle(xp, yp);
  }
  /**
   * Computes the radical axis of the two circles.
   *
   * @since 0.11.1
   * @return the radical axis of the two circles.
   * @throws IllegalArgumentException if the two circles have same center
   */
  public static StraightLine2D radicalAxis(Circle2D circle1, Circle2D circle2) {

    // extract center and radius of each circle
    double r1 = circle1.radius();
    double r2 = circle2.radius();
    Point2D p1 = circle1.center();
    Point2D p2 = circle2.center();

    // compute horizontal angle of joining line
    double angle = Angle2D.horizontalAngle(p1, p2);

    // distance between centers
    double dist = p1.distance(p2);
    if (dist < Shape2D.ACCURACY) {
      throw new IllegalArgumentException("Input circles must have distinct centers");
    }

    // position of the radical axis on the joining line
    double d = (dist * dist + r1 * r1 - r2 * r2) * .5 / dist;

    // pre-compute trigonometric functions
    double cot = Math.cos(angle);
    double sit = Math.sin(angle);

    // compute parameters of the line
    double x0 = p1.x() + d * cot;
    double y0 = p1.y() + d * sit;
    double dx = -sit;
    double dy = cot;

    // update state of current line
    return new StraightLine2D(x0, y0, dx, dy);
  }
  /** @deprecated replaced by circlesIntersections(Circle2D, Circle2D) (0.11.1) */
  @Deprecated
  public static Collection<Point2D> getIntersections(Circle2D circle1, Circle2D circle2) {
    ArrayList<Point2D> intersections = new ArrayList<Point2D>(2);

    // extract center and radius of each circle
    Point2D center1 = circle1.center();
    Point2D center2 = circle2.center();
    double r1 = circle1.radius();
    double r2 = circle2.radius();

    double d = Point2D.distance(center1, center2);

    // case of no intersection
    if (d < abs(r1 - r2) || d > (r1 + r2)) return intersections;

    // Angle of line from center1 to center2
    double angle = Angle2D.horizontalAngle(center1, center2);

    // position of intermediate point
    double d1 = d / 2 + (r1 * r1 - r2 * r2) / (2 * d);
    Point2D tmp = Point2D.createPolar(center1, d1, angle);

    // Add the 2 intersection points
    double h = sqrt(r1 * r1 - d1 * d1);
    intersections.add(Point2D.createPolar(tmp, h, angle + PI / 2));
    intersections.add(Point2D.createPolar(tmp, h, angle - PI / 2));

    return intersections;
  }
Exemple #9
0
  /* (non-Javadoc)
   * @see math.geom2d.GeometricObject2D#almostEquals(math.geom2d.GeometricObject2D, double)
   */
  public boolean almostEquals(GeometricObject2D obj, double eps) {
    if (this == obj) return true;

    if (!(obj instanceof EllipseArc2D)) return false;
    EllipseArc2D arc = (EllipseArc2D) obj;

    // test whether supporting ellipses have same support
    if (abs(ellipse.xc - arc.ellipse.xc) > eps) return false;
    if (abs(ellipse.yc - arc.ellipse.yc) > eps) return false;
    if (abs(ellipse.r1 - arc.ellipse.r1) > eps) return false;
    if (abs(ellipse.r2 - arc.ellipse.r2) > eps) return false;
    if (abs(ellipse.theta - arc.ellipse.theta) > eps) return false;

    // test if angles are the same
    if (!Angle2D.equals(startAngle, arc.startAngle)) return false;
    if (!Angle2D.equals(angleExtent, arc.angleExtent)) return false;

    return true;
  }
Exemple #10
0
  public Box2D boundingBox() {

    // first get ending points
    Point2D p0 = firstPoint();
    Point2D p1 = lastPoint();

    // get coordinate of ending points
    double x0 = p0.x();
    double y0 = p0.y();
    double x1 = p1.x();
    double y1 = p1.y();

    // initialize min and max coords
    double xmin = min(x0, x1);
    double xmax = max(x0, x1);
    double ymin = min(y0, y1);
    double ymax = max(y0, y1);

    // precomputes some values
    Point2D center = ellipse.center();
    double xc = center.x();
    double yc = center.y();
    double endAngle = startAngle + angleExtent;
    boolean direct = angleExtent >= 0;

    // check cases arc contains one maximum
    if (Angle2D.containsAngle(startAngle, endAngle, PI / 2 + ellipse.theta, direct))
      ymax = max(ymax, yc + ellipse.r1);
    if (Angle2D.containsAngle(startAngle, endAngle, 3 * PI / 2 + ellipse.theta, direct))
      ymin = min(ymin, yc - ellipse.r1);
    if (Angle2D.containsAngle(startAngle, endAngle, ellipse.theta, direct))
      xmax = max(xmax, xc + ellipse.r2);
    if (Angle2D.containsAngle(startAngle, endAngle, PI + ellipse.theta, direct))
      xmin = min(xmin, xc - ellipse.r2);

    // return a bounding with computed limits
    return new Box2D(xmin, xmax, ymin, ymax);
  }
Exemple #11
0
 /** Specify parameters of supporting ellipse, bounding angles and flag for direct ellipse. */
 public EllipseArc2D(
     double xc,
     double yc,
     double a,
     double b,
     double theta,
     double start,
     double end,
     boolean direct) {
   this.ellipse = new Ellipse2D(xc, yc, a, b, theta);
   this.startAngle = start;
   this.angleExtent = Angle2D.formatAngle(end - start);
   if (!direct) this.angleExtent = this.angleExtent - PI * 2;
 }
Exemple #12
0
  /**
   * Computes the intersections points between two circles or circular shapes.
   *
   * @param circle1 an instance of circle or circle arc
   * @param circle2 an instance of circle or circle arc
   * @return a collection of 0, 1 or 2 intersection points
   */
  public static Collection<Point2D> circlesIntersections(Circle2D circle1, Circle2D circle2) {
    // extract center and radius of each circle
    Point2D center1 = circle1.center();
    Point2D center2 = circle2.center();
    double r1 = circle1.radius();
    double r2 = circle2.radius();

    double d = Point2D.distance(center1, center2);

    // case of no intersection
    if (d < abs(r1 - r2) || d > (r1 + r2)) return new ArrayList<Point2D>(0);

    // Angle of line from center1 to center2
    double angle = Angle2D.horizontalAngle(center1, center2);

    if (d == abs(r1 - r2) || d == (r1 + r2)) {
      Collection<Point2D> r = new ArrayList<>(1);
      r.add(Point2D.createPolar(center1, r1, angle));
      return r;
    }

    // position of intermediate point
    double d1 = d / 2 + (r1 * r1 - r2 * r2) / (2 * d);
    Point2D tmp = Point2D.createPolar(center1, d1, angle);

    // distance between intermediate point and each intersection
    double h = sqrt(r1 * r1 - d1 * d1);

    // create empty array
    ArrayList<Point2D> intersections = new ArrayList<Point2D>(2);

    // Add the 2 intersection points
    Point2D p1 = Point2D.createPolar(tmp, h, angle + PI / 2);
    intersections.add(p1);
    Point2D p2 = Point2D.createPolar(tmp, h, angle - PI / 2);
    intersections.add(p2);

    return intersections;
  }
Exemple #13
0
 public double position(Point2D point) {
   double angle = Angle2D.horizontalAngle(xc, yc, point.x(), point.y());
   if (direct) return Angle2D.formatAngle(angle - theta);
   else return Angle2D.formatAngle(theta - angle);
 }
Exemple #14
0
 /**
  * Returns the ellipse arc which refers to the reversed parent ellipse, with same start angle, and
  * with opposite angle extent.
  */
 public EllipseArc2D reverse() {
   double newStart = Angle2D.formatAngle(startAngle + angleExtent);
   return new EllipseArc2D(ellipse, newStart, -angleExtent);
 }
Exemple #15
0
 /** Returns the angle associated with the given position */
 public double getAngle(double position) {
   if (position < 0) position = 0;
   if (position > abs(angleExtent)) position = abs(angleExtent);
   if (angleExtent < 0) position = -position;
   return Angle2D.formatAngle(startAngle + position);
 }
Exemple #16
0
 public boolean containsAngle(double angle) {
   return Angle2D.containsAngle(startAngle, startAngle + angleExtent, angle, angleExtent > 0);
 }