/**
* {@inheritDoc}
*
* <p>Note that canceling a <code>AnimatorSet</code> also cancels all of the animations that it is
* responsible for.
*/
@Override
public void cancel() {
mTerminated = true;
if (isStarted()) {
ArrayList<AnimatorListener> tmpListeners = null;
if (mListeners != null) {
tmpListeners = (ArrayList<AnimatorListener>) mListeners.clone();
for (AnimatorListener listener : tmpListeners) {
listener.onAnimationCancel(this);
}
}
if (mDelayAnim != null && mDelayAnim.isRunning()) {
// If we're currently in the startDelay period, just cancel that animator and
// send out the end event to all listeners
mDelayAnim.cancel();
} else if (mSortedNodes.size() > 0) {
for (Node node : mSortedNodes) {
node.animation.cancel();
}
}
if (tmpListeners != null) {
for (AnimatorListener listener : tmpListeners) {
listener.onAnimationEnd(this);
}
}
mStarted = false;
}
}
public ValueAnimator clone() {
final ValueAnimator anim = (ValueAnimator) super.clone();
if (mUpdateListeners != null) {
ArrayList<AnimatorUpdateListener> oldListeners = mUpdateListeners;
anim.mUpdateListeners = new ArrayList<AnimatorUpdateListener>();
int numListeners = oldListeners.size();
for (int i = 0; i < numListeners; ++i) {
anim.mUpdateListeners.add(oldListeners.get(i));
}
}
anim.mSeekTime = -1;
anim.mPlayingBackwards = false;
anim.mCurrentIteration = 0;
anim.mInitialized = false;
anim.mPlayingState = STOPPED;
anim.mStartedDelay = false;
PropertyValuesHolder[] oldValues = mValues;
if (oldValues != null) {
int numValues = oldValues.length;
anim.mValues = new PropertyValuesHolder[numValues];
anim.mValuesMap = new HashMap<String, PropertyValuesHolder>(numValues);
for (int i = 0; i < numValues; ++i) {
PropertyValuesHolder newValuesHolder = oldValues[i].clone();
anim.mValues[i] = newValuesHolder;
anim.mValuesMap.put(newValuesHolder.getPropertyName(), newValuesHolder);
}
}
return anim;
}
/**
* Sets up the animation supplied in the {@link
* com.actionbarsherlock.internal.nineoldandroids.animation.AnimatorSet#play(Animator)} call
* that created this <code>Builder</code> object to play when the given amount of time elapses.
*
* @param delay The number of milliseconds that should elapse before the animation starts.
*/
public Builder after(long delay) {
// setup dummy ValueAnimator just to run the clock
ValueAnimator anim = ValueAnimator.ofFloat(0f, 1f);
anim.setDuration(delay);
after(anim);
return this;
}
/**
* {@inheritDoc}
*
* <p>Note that ending a <code>AnimatorSet</code> also ends all of the animations that it is
* responsible for.
*/
@Override
public void end() {
mTerminated = true;
if (isStarted()) {
if (mSortedNodes.size() != mNodes.size()) {
// hasn't been started yet - sort the nodes now, then end them
sortNodes();
for (Node node : mSortedNodes) {
if (mSetListener == null) {
mSetListener = new AnimatorSetListener(this);
}
node.animation.addListener(mSetListener);
}
}
if (mDelayAnim != null) {
mDelayAnim.cancel();
}
if (mSortedNodes.size() > 0) {
for (Node node : mSortedNodes) {
node.animation.end();
}
}
if (mListeners != null) {
ArrayList<AnimatorListener> tmpListeners = (ArrayList<AnimatorListener>) mListeners.clone();
for (AnimatorListener listener : tmpListeners) {
listener.onAnimationEnd(this);
}
}
mStarted = false;
}
}
/**
* {@inheritDoc}
*
* <p>Starting this <code>AnimatorSet</code> will, in turn, start the animations for which it is
* responsible. The details of when exactly those animations are started depends on the dependency
* relationships that have been set up between the animations.
*/
@Override
public void start() {
mTerminated = false;
mStarted = true;
// First, sort the nodes (if necessary). This will ensure that sortedNodes
// contains the animation nodes in the correct order.
sortNodes();
int numSortedNodes = mSortedNodes.size();
for (int i = 0; i < numSortedNodes; ++i) {
Node node = mSortedNodes.get(i);
// First, clear out the old listeners
ArrayList<AnimatorListener> oldListeners = node.animation.getListeners();
if (oldListeners != null && oldListeners.size() > 0) {
final ArrayList<AnimatorListener> clonedListeners =
new ArrayList<AnimatorListener>(oldListeners);
for (AnimatorListener listener : clonedListeners) {
if (listener instanceof DependencyListener || listener instanceof AnimatorSetListener) {
node.animation.removeListener(listener);
}
}
}
}
// nodesToStart holds the list of nodes to be started immediately. We don't want to
// start the animations in the loop directly because we first need to set up
// dependencies on all of the nodes. For example, we don't want to start an animation
// when some other animation also wants to start when the first animation begins.
final ArrayList<Node> nodesToStart = new ArrayList<Node>();
for (int i = 0; i < numSortedNodes; ++i) {
Node node = mSortedNodes.get(i);
if (mSetListener == null) {
mSetListener = new AnimatorSetListener(this);
}
if (node.dependencies == null || node.dependencies.size() == 0) {
nodesToStart.add(node);
} else {
int numDependencies = node.dependencies.size();
for (int j = 0; j < numDependencies; ++j) {
Dependency dependency = node.dependencies.get(j);
dependency.node.animation.addListener(
new DependencyListener(this, node, dependency.rule));
}
node.tmpDependencies = (ArrayList<Dependency>) node.dependencies.clone();
}
node.animation.addListener(mSetListener);
}
// Now that all dependencies are set up, start the animations that should be started.
if (mStartDelay <= 0) {
for (Node node : nodesToStart) {
node.animation.start();
mPlayingSet.add(node.animation);
}
} else {
mDelayAnim = ValueAnimator.ofFloat(0f, 1f);
mDelayAnim.setDuration(mStartDelay);
mDelayAnim.addListener(
new AnimatorListenerAdapter() {
boolean canceled = false;
public void onAnimationCancel(Animator anim) {
canceled = true;
}
public void onAnimationEnd(Animator anim) {
if (!canceled) {
int numNodes = nodesToStart.size();
for (int i = 0; i < numNodes; ++i) {
Node node = nodesToStart.get(i);
node.animation.start();
mPlayingSet.add(node.animation);
}
}
}
});
mDelayAnim.start();
}
if (mListeners != null) {
ArrayList<AnimatorListener> tmpListeners = (ArrayList<AnimatorListener>) mListeners.clone();
int numListeners = tmpListeners.size();
for (int i = 0; i < numListeners; ++i) {
tmpListeners.get(i).onAnimationStart(this);
}
}
if (mNodes.size() == 0 && mStartDelay == 0) {
// Handle unusual case where empty AnimatorSet is started - should send out
// end event immediately since the event will not be sent out at all otherwise
mStarted = false;
if (mListeners != null) {
ArrayList<AnimatorListener> tmpListeners = (ArrayList<AnimatorListener>) mListeners.clone();
int numListeners = tmpListeners.size();
for (int i = 0; i < numListeners; ++i) {
tmpListeners.get(i).onAnimationEnd(this);
}
}
}
}
/**
* There are only two messages that we care about: ANIMATION_START and ANIMATION_FRAME. The
* START message is sent when an animation's start() method is called. It cannot start
* synchronously when start() is called because the call may be on the wrong thread, and it
* would also not be synchronized with other animations because it would not start on a common
* timing pulse. So each animation sends a START message to the handler, which causes the
* handler to place the animation on the active animations queue and start processing frames for
* that animation. The FRAME message is the one that is sent over and over while there are any
* active animations to process.
*/
public void handleMessage(Message msg) {
boolean callAgain = true;
ArrayList<ValueAnimator> animations = sAnimations.get();
ArrayList<ValueAnimator> delayedAnims = sDelayedAnims.get();
switch (msg.what) {
// TODO: should we avoid sending frame message when starting if we
// were already running?
case ANIMATION_START:
ArrayList<ValueAnimator> pendingAnimations = sPendingAnimations.get();
if (animations.size() > 0 || delayedAnims.size() > 0) {
callAgain = false;
}
// pendingAnims holds any animations that have requested to be started
// We're going to clear sPendingAnimations, but starting animation may
// cause more to be added to the pending list (for example, if one animation
// starting triggers another starting). So we loop until sPendingAnimations
// is empty.
while (pendingAnimations.size() > 0) {
ArrayList<ValueAnimator> pendingCopy =
(ArrayList<ValueAnimator>) pendingAnimations.clone();
pendingAnimations.clear();
int count = pendingCopy.size();
for (int i = 0; i < count; ++i) {
ValueAnimator anim = pendingCopy.get(i);
// If the animation has a startDelay, place it on the delayed list
if (anim.mStartDelay == 0) {
anim.startAnimation();
} else {
delayedAnims.add(anim);
}
}
}
// fall through to process first frame of new animations
case ANIMATION_FRAME:
// currentTime holds the common time for all animations processed
// during this frame
long currentTime = AnimationUtils.currentAnimationTimeMillis();
ArrayList<ValueAnimator> readyAnims = sReadyAnims.get();
ArrayList<ValueAnimator> endingAnims = sEndingAnims.get();
// First, process animations currently sitting on the delayed queue, adding
// them to the active animations if they are ready
int numDelayedAnims = delayedAnims.size();
for (int i = 0; i < numDelayedAnims; ++i) {
ValueAnimator anim = delayedAnims.get(i);
if (anim.delayedAnimationFrame(currentTime)) {
readyAnims.add(anim);
}
}
int numReadyAnims = readyAnims.size();
if (numReadyAnims > 0) {
for (int i = 0; i < numReadyAnims; ++i) {
ValueAnimator anim = readyAnims.get(i);
anim.startAnimation();
anim.mRunning = true;
delayedAnims.remove(anim);
}
readyAnims.clear();
}
// Now process all active animations. The return value from animationFrame()
// tells the handler whether it should now be ended
int numAnims = animations.size();
int i = 0;
while (i < numAnims) {
ValueAnimator anim = animations.get(i);
if (anim.animationFrame(currentTime)) {
endingAnims.add(anim);
}
if (animations.size() == numAnims) {
++i;
} else {
// An animation might be canceled or ended by client code
// during the animation frame. Check to see if this happened by
// seeing whether the current index is the same as it was before
// calling animationFrame(). Another approach would be to copy
// animations to a temporary list and process that list instead,
// but that entails garbage and processing overhead that would
// be nice to avoid.
--numAnims;
endingAnims.remove(anim);
}
}
if (endingAnims.size() > 0) {
for (i = 0; i < endingAnims.size(); ++i) {
endingAnims.get(i).endAnimation();
}
endingAnims.clear();
}
// If there are still active or delayed animations, call the handler again
// after the frameDelay
if (callAgain && (!animations.isEmpty() || !delayedAnims.isEmpty())) {
sendEmptyMessageDelayed(
ANIMATION_FRAME,
Math.max(
0, sFrameDelay - (AnimationUtils.currentAnimationTimeMillis() - currentTime)));
}
break;
}
}
/**
* Constructs and returns a ValueAnimator that animates between Object values. A single value
* implies that that value is the one being animated to. However, this is not typically useful in
* a ValueAnimator object because there is no way for the object to determine the starting value
* for the animation (unlike ObjectAnimator, which can derive that value from the target object
* and property being animated). Therefore, there should typically be two or more values.
*
* <p>Since ValueAnimator does not know how to animate between arbitrary Objects, this factory
* method also takes a TypeEvaluator object that the ValueAnimator will use to perform that
* interpolation.
*
* @param evaluator A TypeEvaluator that will be called on each animation frame to provide the
* ncessry interpolation between the Object values to derive the animated value.
* @param values A set of values that the animation will animate between over time.
* @return A ValueAnimator object that is set up to animate between the given values.
*/
public static ValueAnimator ofObject(TypeEvaluator evaluator, Object... values) {
ValueAnimator anim = new ValueAnimator();
anim.setObjectValues(values);
anim.setEvaluator(evaluator);
return anim;
}
/**
* Constructs and returns a ValueAnimator that animates between the values specified in the
* PropertyValuesHolder objects.
*
* @param values A set of PropertyValuesHolder objects whose values will be animated between over
* time.
* @return A ValueAnimator object that is set up to animate between the given values.
*/
public static ValueAnimator ofPropertyValuesHolder(PropertyValuesHolder... values) {
ValueAnimator anim = new ValueAnimator();
anim.setValues(values);
return anim;
}
/**
* Constructs and returns a ValueAnimator that animates between float values. A single value
* implies that that value is the one being animated to. However, this is not typically useful in
* a ValueAnimator object because there is no way for the object to determine the starting value
* for the animation (unlike ObjectAnimator, which can derive that value from the target object
* and property being animated). Therefore, there should typically be two or more values.
*
* @param values A set of values that the animation will animate between over time.
* @return A ValueAnimator object that is set up to animate between the given values.
*/
public static ValueAnimator ofFloat(float... values) {
ValueAnimator anim = new ValueAnimator();
anim.setFloatValues(values);
return anim;
}
/**
* Constructs and returns a ValueAnimator that animates between int values. A single value implies
* that that value is the one being animated to. However, this is not typically useful in a
* ValueAnimator object because there is no way for the object to determine the starting value for
* the animation (unlike ObjectAnimator, which can derive that value from the target object and
* property being animated). Therefore, there should typically be two or more values.
*
* @param values A set of values that the animation will animate between over time.
* @return A ValueAnimator object that is set up to animate between the given values.
*/
public static ValueAnimator ofInt(int... values) {
ValueAnimator anim = new ValueAnimator();
anim.setIntValues(values);
return anim;
}
