protected int read(byte[] buffer) {
if (input == null) {
input = new OggInputStream(file.read());
setup(input.getChannels(), input.getSampleRate());
}
return input.read(buffer);
}
public Sound(OpenALAudio audio, FileHandle file) {
super(audio);
OggInputStream input = new OggInputStream(file.read());
ByteArrayOutputStream output = new ByteArrayOutputStream(4096);
byte[] buffer = new byte[2048];
while (!input.atEnd()) {
int length = input.read(buffer);
if (length == -1) break;
output.write(buffer, 0, length);
}
setup(output.toByteArray(), input.getChannels(), input.getSampleRate());
}
protected void reset() {
if (input == null) return;
input.close();
input = null;
}
/**
* Get the data out of an OGG file
*
* @param input The input stream from which to read the OGG file
* @return The data describing the OGG thats been read
* @throws IOException Indicaites a failure to read the OGG file
*/
@Nonnull
public OggData getData(@Nullable InputStream input) throws IOException {
if (input == null) {
throw new IOException("Failed to read OGG, source does not exist?");
}
ByteArrayOutputStream dataout = new ByteArrayOutputStream();
// SyncState oy = new SyncState(); // sync and verify incoming physical bitstream
// StreamState os = new StreamState(); // take physical pages, weld into a logical stream of
// packets
// Page og = new Page(); // one Ogg bitstream page. Vorbis packets are inside
// Packet op = new Packet(); // one raw packet of data for decode
//
// Info vi = new Info(); // struct that stores all the static vorbis bitstream settings
// Comment vc = new Comment(); // struct that stores all the bitstream user comments
// DspState vd = new DspState(); // central working state for the packet->PCM decoder
// Block vb = new Block(vd); // local working space for packet->PCM decode
//
// byte[] buffer;
// int bytes = 0;
//
// boolean bigEndian = ByteOrder.nativeOrder().equals(ByteOrder.BIG_ENDIAN);
// // Decode setup
//
// oy.initialize(); // Now we can read pages
//
// while (true) { // we repeat if the bitstream is chained
// int eos = 0;
//
// // grab some data at the head of the stream. We want the first page
// // (which is guaranteed to be small and only contain the Vorbis
// // stream initial header) We need the first page to get the stream
// // serialno.
//
// // submit a 4k block to libvorbis' Ogg layer
// int index = oy.buffer(4096);
//
// buffer = oy.data;
// try {
// bytes = input.read(buffer, index, 4096);
// } catch (Exception e) {
// Log.error("Failure reading in vorbis");
// Log.error(e);
// System.exit(0);
// }
// oy.wrote(bytes);
//
// // Get the first page.
// if (oy.pageout(og) != 1) {
// // have we simply run out of data? If so, we're done.
// if (bytes < 4096)
// break;
//
// // error case. Must not be Vorbis data
// Log.error("Input does not appear to be an Ogg bitstream.");
// System.exit(0);
// }
//
// // Get the serial number and set up the rest of decode.
// // serialno first; use it to set up a logical stream
// os.initialize(og.serialno());
//
// // extract the initial header from the first page and verify that the
// // Ogg bitstream is in fact Vorbis data
//
// // I handle the initial header first instead of just having the code
// // read all three Vorbis headers at once because reading the initial
// // header is an easy way to identify a Vorbis bitstream and it's
// // useful to see that functionality seperated out.
//
// vi.initialize();
// vc.initialize();
// if (os.pagein(og) < 0) {
// // error; stream version mismatch perhaps
// Log.error("Error reading first page of Ogg bitstream data.");
// System.exit(0);
// }
//
// if (os.packetout(op) != 1) {
// // no page? must not be vorbis
// Log.error("Error reading initial header packet.");
// System.exit(0);
// }
//
// if (vi.synthesis_headerin(vc, op) < 0) {
// // error case; not a vorbis header
// Log.error("This Ogg bitstream does not contain Vorbis audio data.");
// System.exit(0);
// }
//
// // At this point, we're sure we're Vorbis. We've set up the logical
// // (Ogg) bitstream decoder. Get the comment and codebook headers and
// // set up the Vorbis decoder
//
// // The next two packets in order are the comment and codebook headers.
// // They're likely large and may span multiple pages. Thus we reead
// // and submit data until we get our two pacakets, watching that no
// // pages are missing. If a page is missing, error out; losing a
// // header page is the only place where missing data is fatal. */
//
// int i = 0;
// while (i < 2) {
// while (i < 2) {
//
// int result = oy.pageout(og);
// if (result == 0)
// break; // Need more data
// // Don't complain about missing or corrupt data yet. We'll
// // catch it at the packet output phase
//
// if (result == 1) {
// os.pagein(og); // we can ignore any errors here
// // as they'll also become apparent
// // at packetout
// while (i < 2) {
// result = os.packetout(op);
// if (result == 0)
// break;
// if (result == -1) {
// // Uh oh; data at some point was corrupted or missing!
// // We can't tolerate that in a header. Die.
// Log.error("Corrupt secondary header. Exiting.");
// System.exit(0);
// }
// vi.synthesis_headerin(vc, op);
// i++;
// }
// }
// }
// // no harm in not checking before adding more
// index = oy.buffer(4096);
// buffer = oy.data;
// try {
// bytes = input.read(buffer, index, 4096);
// } catch (Exception e) {
// Log.error("Failed to read Vorbis: ");
// Log.error(e);
// System.exit(0);
// }
// if (bytes == 0 && i < 2) {
// Log.error("End of file before finding all Vorbis headers!");
// System.exit(0);
// }
// oy.wrote(bytes);
// }
//
// convsize = 4096 / vi.channels;
//
// // OK, got and parsed all three headers. Initialize the Vorbis
// // packet->PCM decoder.
// vd.synthesis_init(vi); // central decode state
// vb.initialize(vd); // local state for most of the decode
// // so multiple block decodes can
// // proceed in parallel. We could initialize
// // multiple vorbis_block structures
// // for vd here
//
// float[][][] _pcm = new float[1][][];
// int[] _index = new int[vi.channels];
// // The rest is just a straight decode loop until end of stream
// while (eos == 0) {
// while (eos == 0) {
//
// int result = oy.pageout(og);
// if (result == 0)
// break; // need more data
// if (result == -1) { // missing or corrupt data at this page position
// Log.error("Corrupt or missing data in bitstream; continuing...");
// } else {
// os.pagein(og); // can safely ignore errors at
// // this point
// while (true) {
// result = os.packetout(op);
//
// if (result == 0)
// break; // need more data
// if (result == -1) { // missing or corrupt data at this page position
// // no reason to complain; already complained above
// } else {
// // we have a packet. Decode it
// int samples;
// if (vb.synthesis(op) == 0) { // test for success!
// vd.synthesis_blockin(vb);
// }
//
// // **pcm is a multichannel float vector. In stereo, for
// // example, pcm[0] is left, and pcm[1] is right. samples is
// // the size of each channel. Convert the float values
// // (-1.<=range<=1.) to whatever PCM format and write it out
//
// while ((samples = vd.synthesis_pcmout(_pcm,
// _index)) > 0) {
// float[][] pcm = _pcm[0];
// //boolean clipflag = false;
// int bout = (samples < convsize ? samples
// : convsize);
//
// // convert floats to 16 bit signed ints (host order) and
// // interleave
// for (i = 0; i < vi.channels; i++) {
// int ptr = i * 2;
// //int ptr=i;
// int mono = _index[i];
// for (int j = 0; j < bout; j++) {
// int val = (int) (pcm[i][mono + j] * 32767.);
// // short val=(short)(pcm[i][mono+j]*32767.);
// // int val=(int)Math.round(pcm[i][mono+j]*32767.);
// // might as well guard against clipping
// if (val > 32767) {
// val = 32767;
// //clipflag = true;
// }
// if (val < -32768) {
// val = -32768;
// //clipflag = true;
// }
// if (val < 0)
// val = val | 0x8000;
//
// if (bigEndian) {
// convbuffer[ptr] = (byte) (val >>> 8);
// convbuffer[ptr + 1] = (byte) (val);
// } else {
// convbuffer[ptr] = (byte) (val);
// convbuffer[ptr + 1] = (byte) (val >>> 8);
// }
// ptr += 2 * (vi.channels);
// }
// }
//
// dataout.write(convbuffer, 0, 2 * vi.channels * bout);
//
// vd.synthesis_read(bout); // tell libvorbis how
// // many samples we
// // actually consumed
// }
// }
// }
// if (og.eos() != 0)
// eos = 1;
// }
// }
// if (eos == 0) {
// index = oy.buffer(4096);
// if (index >= 0) {
// buffer = oy.data;
// try {
// bytes = input.read(buffer, index, 4096);
// } catch (Exception e) {
// Log.error("Failure during vorbis decoding");
// Log.error(e);
// return null;
// }
// } else {
// bytes = 0;
// }
// oy.wrote(bytes);
// if (bytes == 0)
// eos = 1;
// }
// }
//
// // clean up this logical bitstream; before exit we see if we're
// // followed by another [chained]
//
// os.clear();
//
// // ogg_page and ogg_packet structs always point to storage in
// // libvorbis. They're never freed or manipulated directly
//
// vb.clear();
// vd.clear();
// vi.clear(); // must be called last
// }
//
// // OK, clean up the framer
// oy.clear();
// OggData ogg = new OggData();
// ogg.channels = vi.channels;
// ogg.rate = vi.rate;
OggInputStream oggInput = new OggInputStream(input);
// boolean done = false;
while (!oggInput.atEnd()) {
dataout.write(oggInput.read());
}
OggData ogg = new OggData();
ogg.channels = oggInput.getChannels();
ogg.rate = oggInput.getRate();
byte[] data = dataout.toByteArray();
ogg.data = ByteBuffer.allocateDirect(data.length);
ogg.data.put(data);
ogg.data.rewind();
return ogg;
}
